Operation Manual

3
CXA60/80
Front panel controls
1 2 3
4 8
9 10
11
5 6 7
1. Standby/On
2.
(MP3) input
For connection to a portable audio device.
3. Headphones
For suitable headphones – connection will mute the speakers.
4. Analogue source (A1-A4)
A1 – Toggles between balanced/unbalanced.
A4 – Toggles between unbalanced/MP3 input.
5. Direct
Disables tone and balance controls.
6. Speaker A/B select
7. Mute
8. Digital source (D1-D3 /
)
Pressing the button will toggle between inputs.
9. Balance
10.
Bass and Treble
11. Volume
Rear panel connections
Power AC
Out In
OutIn
USB Audio In
D3BT100 D2 D1
LeftRight
Left Right
Power Rating: 220–230V AC ~ 50/60Hz
Max Power Consumption: 750W
Ground/Lift
Switch
LiftGnd
S/P DIF
Co-axial In
Toslink
Optical In
Toslink
Optical In
(Unbalanced)
(Unbalanced)
(Balanced)
(Balanced)
Right
Right
Left
Left
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Pre-out A2 A1A3A4Sub-Out
Control Bus
1
2
3 4 65
7 8 9 10
1. AC power socket
2. Loudspeaker terminals
3. Sub Out
4. Pre-out
5. Analogue inputs (A2, A3 and A4)
6. A1 input
Note: Balanced (XLR) is available on the CXA80 only.
7. USB Audio In (CXA80 only)
For connecting to PC/MAC computers.
Ground/Lift switch
Set this switch to 'Lift' if a humming noise can be heard through the speakers.
Otherwise, leave this switch setting to 'Ground' as recommended.
8. Control Bus
For more information, see 'Control Bus' section of this manual.
9. BT100 (not supplied)
For connection with the optional BT100 Bluetooth audio receiver.
10. Digital inputs (D1, D2 and D3)