P.10 DE P.18 FR P.26 ES P.34 IT P.42 SV P.50 RU P.58 中文 P.66 日本語 INTEGRATED AMPLIFIER EN EDGE A P.
Contents IMPORTANT SAFETY INFORMATION 3 FRONT PANEL 5 REAR PANEL 6 REMOTE CONTROL 7 BLUETOOTH 8 POWER SYNCING 9 TECHNICAL SPECIFICATION 10 TROUBLESHOOTING 11 Our quest for audio perfection is built on simple principles; minimise the number of components in the signal path and select each component by listening to discover those with the purest sound. We’re immensely proud of what we’ve created, having spared nothing in our efforts for perfection.
6. Clean only with a dry cloth. 10. P rotect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus. 11. O nly use attachments/accessories specified by the manufacturer. 12. U se with only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13.
BATTERY DISPOSAL Batteries may contain substances harmful to the environment. Please dispose of any discharged batteries with due consideration and in accordance with local environmental/electronic recycling guidelines. SERVICING These units are not user serviceable. Never attempt to repair, disassemble or reconstruct the unit if there seems to be a problem. A serious electric shock could result if this precautionary measure is ignored. In the event of a problem or failure, please contact your dealer.
DE Front panel EN EDGE A 5 FR ES IT SV Switches the unit between Standby mode (indicated by dim LED) and On (indicated by bright LED). Standby mode is a low power mode where the power consumption is less than 0.5 Watts. Used for remote control. 3. VOLUME/SOURCE SELECTOR The first time the Edge A is powered on after a factory reset, it will perform a calibration process, which takes approx. 30 seconds. To change the volume, rotate the front part. To select a source, rotate the back part.
Rear panel 1. VOLTAGE SELECTOR SWITCH 6. AUDIO RETURN CHANNEL (ARC)(D4) 10. AUTO POWER DOWN (APD) SWITCH Note: For use by Cambridge Audio service personnel only! Connection from a TV that supports ARC function 11. LINK 2. AC POWER SOCKET 7. DIGITAL INPUTS (D1, D2 AND D3) Refer to the 'Power syncing' section of this manual for more information. 3. SPEAKER TERMINALS 8. BLUETOOTH ANTENNA 12. RS232 4.
DE Remote control EN EDGE A 7 FR ES 1 IT SV RU 1. STANDBY/ON 2. VOLUME 2 3 3 5. SOURCE SELECTOR 6. PROGRAMMABLE BUTTONS Press and hold to store the current source and volume level. 4 5 5 2 6 日本語 4. M UTE/UNMUTE 中文 3.
Bluetooth Selecting this allows the Edge A to receive wireless Bluetooth audio from most phones, tablets and laptops. PAIRING To begin streaming high quality music from your chosen media source it will first need to be paired with the Edge A. Note: Your device can only be paired and connected to the Edge A while the Bluetooth source is selected. Bluetooth source input.
FR Use the Link wire between the Edge A and Edge W to synchronise power on/standby.
Technical specification Continuous power output: 100W RMS into 8 Ohms 200W RMS into 4 Ohms THD (unweighted): <0.002% 1kHz at rated power (8 Ohms) <0.
EDGE A 11 DE If you experience any trouble with your Edge A, visit the help section on our webpage at http://techsupport.cambridgeaudio.com EN Troubleshooting FR ES IT There is no power There is a loud buzz or hum SV • Ensure the AC power cord is connected securely. •E nsure no interconnects are loose or defective. RU There is weak bass or diffused stereo imaging 中文 • Ensure the plug is fully inserted into the wall socket and is switched on. • Check fuse in the mains plug or adaptor.
W W W.C A M B R I D G E AU D I O.C O M Gallery Court, Hankey Place London se1 4bb United Kingdom Cambridge Audio is a brand of Audio Partnership Plc. Registered in England No.
