Operation Manual

EDGE A
5
EN ITDE SVFR RUES 中文 日本語
Front panel
1 42 3
1. STANDBY/ON
Switches the unit between Standby mode
(indicated by dim LED) and On (indicated by
bright LED). Standby mode is a low power
mode where the power consumption is less
than 0.5 Watts.
AUTO POWER DOWN (APD)
The product will automatically switch to
standby mode after inactivity of 20 minutes.
To enable or disable this function, use the APD
switch located on the rear of the unit.
2. IR SENSOR
Used for remote control.
3. VOLUME/SOURCE SELECTOR
To change the volume, rotate the front part. To
select a source, rotate the back part.
4. HEADPHONES
For suitable headphones – connection will
automatically mute the loudspeaker and
pre-out.
VOLUME CALIBRATION
The rst time the Edge A is powered on after
a factory reset, it will perform a calibration
process, which takes approx. 30 seconds.
Please allow this process to complete before
attempting to use the product.