Instructions / Assembly

4. To shut down the fire pit, turn the control knob to the “OFF” position and turn off the tank
valve.
MAINTENANCE
The flames should look like those in Figure 15. To clean the
burner, use a soft brush after the burner has cooled completely.
Never use a vacuum cleaner on the burner. It is recommended
that the fire pit be stored indoors during the winter if it will be
subjected to freezing temperatures. The LP cylinder must be
disconnected and removed from the appliance before the
appliance can be stored indoors.
TROUBLESHOOTING GUIDE
PROBLEM CAUSE REMEDY
No Propane Gas at Burner
Check that gas tank valve is
open. Turn control knob to “ON”
and push control knob in. Make
sure tank has propane gas.
No Spark at Electrode
Check that AAA battery is
installed with negative (-) end
first and has a charge. Check
that the wire is connected to the
ignition module. Check that the
electrode is not cracked or
broken.
Burner won’t light
Lack of oxygen
Remove excess lava rocks or
fire ices from around the ignition
well.
Thermocouple not in flame
Check that the tip of the
thermocouple is even with the
top of the ignition well. Remove
any lava rocks from the igntion
well.
Thermocouple connection
at the main control valve is
loose
Tighten the thermocouple nut at
the back of the valve.
Burner won’t stay
lit after lighting
No Lava Rocks on Burner
Cover the burner with lava rocks
per the instructions
Figure 15