Instructions / Assembly

IMPORTANT SAFETY INFORMATION ABOUT
PROPANE (LP) GAS
A self cont ained LP-gas cylinder for use w ith this appliance must have a
capacity of 20 lbs/9 kgs. and must be equipped with a Type 1 connector and an
OPD (overfill protection device). See Figure 1.
The LP-gas supply c ylinder to be used m ust be constructed and marked in
accordance with the specification for LP-gas cylinders of the U.S. Department
of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339,
Cylinder, Sphere and Tubes for the Transportation of Dangerous Goods.
 The cylinder supply system must be arranged for vapor withdrawal.
 The cylinder used must include a collar to protect the cylinder valve.
 This appliance shall be used only outdoors in a well-ventilated space and
shall not be used in a building, garage or any other enclosed space.
 When this appliance is not is use, the gas must be turned off at the supply
cylinder.
 Storage of this appliance indoors is permissible only if the cylinder is
disconnected and removed from the appliance.
 Cylinders must be stored outdoors in a well-ventilated area out of the
reach of children .Disconnected cylinders must have threaded valve plugs
tightly installed and must not be stored in a building, garage or any other
enclosed areas.
CSA (Canadian Standards Association) certified to ANSI Z21.97•CSA
2.41-2012 “ Outdoor Decorative Gas Appliances”
The gas hose is routed through a “U” bolt to prevent the hose from coming in
contact with the burner. DO NOT remove the hose from the “U” bolt.
See Figure 2.
Figure 1 Figure 2
SPECIFICATIONS
INPUT 40,000 Btu/hr 30,000 Btu/hr Low fire
Propane Regulator
Pressure
11 in / 2.74 kPa water
column
Natural Gas Minimum
Inlet Pressure
7 in / 1.74 kPa water
column
Clearances to
combustible surfaces
Sides: 24in./60.96cm Top: 72 in. / 182.88 cm