Instructions / Assembly
Page | 23
• Grill may be in an area that is too windy.
Flame blows out on low setting
or has uneven heat distribution.
• Check for spider webs or insect nest.
• Cold grill needs to be preheated for 5 minutes on high setting.
• Cold and windy weather will require you to move grill away
from the wind.
• Lack of fuel. Check to see cylinder valve is open and cylinder
has fuel.
Low heat with the knob on
“HIGH”
• Check to see if the fuel hose is bent or kinked.
• Make sure the grill area is clear of dust.
• Check your gas supply and gas pressure.
• If it is only one burner that appears low, make sure the orifice
or burner is clean.
Grill is Too Hot
• Excess grease build-up causing grease fires.
• Damaged or faulty regulator.
Replace with factory authorized parts.
• Cook on a lower temperature setting.
Flame behind control panel or
control knob area.
IMMEDIATELY shut off cylinder valve and allow grill to cool.
• Check for spider webs or insect nest.
• Gas is leaking from a faulty connection. Tighten connections
with an adjustable wrench and replace damaged parts. Perform
a leak test on all connections before cooking on grill again.
Fire at any connection.
IMMEDIATELY shut off cylinder valve and allow grill to cool.
• Gas is leaking from a faulty connection. Tighten connections
with an adjustable wrench and replace damaged parts.
• Perform a leak test on all connections before cooking on grill
again.