WAREWASHING SYSTEM GUIDE A Complete Line of Products for Washing, Storing, and Transportation with Minimal Handling.
Camrack® Warewashing System Camrack 4-in-1 Warewashing System • • • • Efficient Washing Optimum Sanitary Storage Inventory Control Safe, Sanitary Transportation Camrack Warewashing System Cambro® offers a 4-in-1 system where glassware is washed, stored, identified and transported in one multi-purpose unit. This complete system includes the Camrack compartment racks, a Camdolly ® and the Camrack cover.
Efficient Washing System Innovative Design Cambro’s open inside compartments provide thorough circulation of water and cleaning solutions to promote excellent cleaning and quick and thorough drying. Cambro’s closed outer wall system is designed for optimum cleaning, keeping water and chemicals inside the rack, reducing waste. FACT: Water in commercial dishwashers enters from above and below, not from the sides.
Hygienic Storage and Transportation System Ideal Cleaning and Sanitary Storage The Camrack® System will protect glassware and keep it clean until the next event, with no rewashing.
Easy to Handle and Safe to Stack System Ergonomic Design Cambro Camracks have built-in handles on each side allowing easy and safe handling. Unlike open-walled competitive racks, there are no crevices for fingers to get stuck in thereby reducing employee injury, glass breakage and risk of contamination. Edges of racks and handles are smooth, flat surfaces that allow Camracks to easily slide over each other and interstack for storage.
Cost-Efficient System Closed Outer Wall System Increases Cost Savings Step 1.—Washing Step 2.—Stacking, Transporting or Storing Step 3.—Setting up With Cambro Camracks, the glassware is washed in the dishwasher, stacked on a Camdolly and covered on top for storage. When glassware is needed, employees can easily retrieve and transport to the appropriate location. No plastic wrap is needed for storage or rewashing needed before use.
Overall Cost Savings En e rgy Br e 11% On average, 25 cents is spent to wash one Camrack® full of glassware. With an open wall system, this amount is doubled due to rewashing the glassware after storage. Chart shows the breakdown of costs during the process of washing, storing and transporting glassware and dishes.
Full Size Camracks® for Stemware & Tumblers Whatever size and style glassware you have, we have the right glass rack to wash, transport and store them. From washing and handling to stacking, storing and transporting, these racks offer complete protection for all your delicate and valuable stemware and tumblers. Choose the correct dishrack: 1. Measure the maximum diameter of your glass (stemware or tumbler) to determine the number of compartments. diameter height diameter 2.
25 COMPARTMENTS Ø MAX. DIAMETER (CM) MAX. HEIGHT (CM) CODE RACK HEIGHT (CM) 8,7 9,2 25S318 14,3 8,7 11,4 25S418 14,3 8,7 13,3 25S434 18,4 8,7 15,5 25S534 18,4 8,7 17,4 25S638 22,5 8,7 19,6 25S738 22,5 25 COMPARTMENTS Ø MAX. DIAMETER (CM) MAX.
Other Types of Camracks® In Stock Colours BR258: (110), (119), (151), (163), (167), (168), (184), (186), (414), (416). FR258, 8FBNH434: (151). DESCRIPTION INSIDE RACK HEIGHT OUTSIDE RACK HEIGHT CODE *Full Base Rack Full Flatware Rack 8 Compartment Half Flatware Basket 8,3 cm 10,1 cm BR258 6,7 cm 10,1 cm FR258 12 cm 18,4 cm 8FBNH434 No Handles See colour chart on previous page for Base Rack colours. Standard Extender Colour: Soft Gray (151).
Dish Caddies and Service Carts Dish Caddies Store and transport plates and trays with Cambro’s complete line of dish caddies. In Stock Colours ADCS: (110), (401), (480). ADC33: (131). TDC30: (191). CODE DESCRIPTION PLATES PER COLUMN OVERALL DIMENSIONS WxLxH HOLDS ADCS ADC33 TDC30 Adjustable Approx. 45-60 Adjustable Approx. 45-60 73 x 96 x 81 cm 76,05 x 98,4 x 83,82 cm Adjustable Approx.
Inventory Management & Control Camrack® Extender ID Clip Camrack Extender ID Clips make easier glassware inventory management just a quick click away. ID clips simply snap onto the top extender to immediately label contents on-site at any time. Want to find a sustainable way to identify and re-use your existing Camracks to fit new glassware? Clips allow operators to change contents, re-label and continue using the same racks, simply by changing ID clips.