User Manual

D-POWER
SERIES

    
   
 
D-POWER 05
120/230 V ~ 50/60 Hz 120 W
250 W / 4 Ω
xxxxx

    
   
 
D-POWER 1
120/230 V ~ 50/60 Hz 200 W
500 W / 4 Ω
xxxxx
USER MANUAL
D-POWER 05/1
P.12
3.3 Mains
3.3.1 Mains Supply
When mounting or connecting the amp always disconnect it from mains.
Only connect the D-POWER amplifier to an appropriate AC circuit and out-
let, according to the requirements indicated in the second line on the rat-
ing plate.
Rating plates for D-POWER 05 and D-POWER 1.
Mains current draw and power consumption at different mains voltages
with
1
∕8 thofratedoutputpowerinto4Ωload,bothchannelsdriven:
Measured with pink noise with crest factor of 12 dB to represent typical music signal.
Voltage Mains Frequency Current Power Consumption
D-POWER 05
100 V 50/60 Hz 1,80 A 120 W
D-POWER 05
120 V 50/60 Hz 1,55 A 120 W
D-POWER 05
200 V 50/60 Hz 1,15 A 120 W
D-POWER 05
230 V 50/60 Hz 1,00 A 120 W
D-POWER 1
100 V 50/60 Hz 2,90 A 200 W
D-POWER 1
120 V 50/60 Hz 2,60 A 200 W
D-POWER 1
200 V 50/60 Hz 1,75 A 200 W
D-POWER 1
230 V 50/60 Hz 1,60 A 200 W
Mains current draw and power consumption @ 230 V, 50 Hz at different
outputpowerlevelswith4Ωload,bothchannelsdriven:
Measured with pink noise with crest factor of 12 dB to represent typical music signal.
Operating condition
Mains
current
Power
consumption
Output
power
Idle (amplifier powered on) 0,3 A 23 W 0 W
32 W per channel 1 A 120 W 64 W
63 W per channel 1,6 A 200 W 126 W
125 W per channel* 2,7 A 350 W 250 W
200 W per channel* 3,9 A 530 W 400 W
*: duration limited by thermal limitation
3 INSTALLATION