Service manual

the foil place station, then the logic will override this and not allow the foil to be picked

up. There is no sense placing a foil if there is no cup.

Foil Place Proximity Sensor:

If looking at the underside of the machine from the foil place and heat seal side of the

machine you should see a proximity sensor that interacts with the foil place shaft.

When the foil place shaft moves down and triggers the Proximity Sensor then that tells

the vacuum holding the foil to turn off, thereby dispensing the foil onto the container. If

there is another cup in the next index then the vacuum will turn back on when the “Home

Position” is reached.

Foil Place Shaft

Proximity Sensor