Service manual

Manual Screen Menu Items:
You may only use the “Manual Screen” options, if the machine is “In Manual Mode” If
the machine is “In Auto Mode” they will have no effect.
Prime/ Purge: If you have a Wilpack Packaging factory installed filler,
this will turn the rotary valve, actuate the piston to dispense product,
turn the rotary valve again and return the piston thereby drawing
product up to be dispensed on the next cycle. This is useful for
initially priming the filler for the first run or for purging the filler after
a run is complete. This is also useful for testing and adjusting fill
volume.
“Filler Ret’d” and “Adv. Filler”:
“Filler Ret’d” puts the piston in the position
where product is waiting to be dispensed.
“Adv. Filler” puts the piston in the position
where product has been dispensed and is ready
to draw product back into the tube from the
hopper/source.
“Rot. At Fill” and “Rot. To Dispense”:
“Rot. At Fill” positions the rotary valve so that product can be drawn up into the tube for
dispensing.
“Rot. To Dispense” positions the rotary valve so that product can be dispensed.
Foil Place Menu Items:
“Turn Vac. On” and “Turn Vac. Off” toggle the vacuum for the foil
place station.
To go back to the Main Screen touch the
button that indicates so.
9