Manual

2. TO SET THE TOTAL RUNNING TIME OF THE MOTORS, ADJUST POTENIOMETER TL TO

ALLOW THE MOTORS TO RUN FOR A FURTHER 5-7 SECONDS AFTER THE MOVE-

MENT CYCLE HAS BEEN COMPLETED (I.E FULLY OPEN OR FULLY CLOSED).

3. CHECK THE SENSITIVITY OF THE

GATES BY TRYING TO PHYSICALLY

STOP THE GATE AND ADJUST THE

POWER SETTINGS ON THE TRANS

FORMER ACCORDINGLY. IF MORE

POWER IS NEEDED FOR HEAVIER

GATES THEN SWITCH OFF POWER

AND MOVE TRANSFORMER WIRE UP

TO SETTING 2. FOR RECHECKING

SENSITIVITY, REPEAT PROCESS UP

TO 3 OR 4 IF EVEN MORE POWER IS

NEEDED.

3.3 - Control Panel Adjustments

1. TO DELAY ONE GATE LEAF, ADJUST POTENIOMETER TR2M TO DELAY THE CLOSIN

OF GATE NO. 2 IN THE CLOSING CYCLE.

TRIMMER TR2M

TRIMMER TL