User manual

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

DMX

Connect the slave and the master unit (same model) with a DMX cable and activate one of the standalone modes (Sound, Auto, Static, Mac-

ro) on the master unit. Now the slave unit follows the master unit. Press MENU once more to return to the main display. The main display is

automatically activated if no input is made within about 30 seconds.

AUTO MODE

Pressing MENU will take you to the selection menu for system settings. Using UP and DOWN, select the menu item “Mode” (lower line) and

conﬁrm with ENTER. Now use the UP and DOWN buttons once more to select the “Auto” sub-menu item, conﬁrm by pressing ENTER twice

to adjust the program speed using UP and DOWN (Program Speed: 00 - 99). Conﬁrm with ENTER and press MENU three times to return to

the main display. The main display is automatically activated if no input is made within about 30 seconds.

STATIC MODE

In the same way as with a DMX control unit, the static mode allows you to adjust all functions such as Dimmer, Strobe and Colour Macros

directly on the device with values from 000 to 255. Thus, an individual scene can be created without an additional DMX controller. Pressing

MENU will take you to the selection menu for system settings. Using UP and DOWN, select the menu item “Mode” (lower line) and conﬁrm

with ENTER. Now use the UP and DOWN buttons once more to select the “Static” menu item and conﬁrm by pressing ENTER. Using the UP

and DOWN buttons, select the desired function and conﬁrm with ENTER. The value (Dimmer, Strobe etc., see table) of the corresponding

function can now be set from 000 to 255 and press ENTER to conﬁrm the input. Once all of the parameters have been set as desired, press

MODE three times to return to the main display. The main display is automatically activated if no input is made within about 30 seconds.

Static

Function Values

Dimmer 000 - 255 0% to 100%

Dim ﬁne 000 - 255 0% to 100%

Strobe

000 - 005 Strobe open

006 - 255 Strobe slow -> fast <1 Hz - 20 Hz

Red 000 - 255 0% to 100%

Green 000 - 255 0% to 100%

Blue 000 - 255 0% to 100%

White 000 - 255 0% to 100%