User manual

ITALIANOPOLSKIESPAÑOL

FRANCAISDEUTSCHENGLISH

DMX

SETTING UP AND MOUNTING

Thanks to the integrated rubber feet, the spotlight can be placed in a suitable location on a ﬂat surface.

Mounting on a truss is performed with the help of a suitable truss clamp (not included). Make sure that the connection to the mounting

bracket is solid, and secure the device with a suitable safety rope to the safety eyelet provided. Important Notice: Overhead installation

should only be carried out by trained personnel.

WINGED BARNDOOR AND FILTER FRAME MOUNTING / REMOVAL

To install or remove the winged barndoor and the ﬁlter frame, please press on the spring-loaded button of the

locking mechanism and fold it upwards. Place the locking mechanism in the same way in the original position.

Sys Info

Temp

Sys Info

Op. Hours

Sys Info

Firmware

Sys Info

Temp = Temperature display of the LED unit Temp LED xxC / xxF

Temp C°/F° °C (= display in degrees Celsius)

°F (= display in degrees Fahrenheit)

Op.Hours = Operating time display Hour Total Displays the total operating time in hours

Firmware = Displays the device software version Vx. xx