Manual

TX320 Transmitter

7.6.5.6 P127, Command 5: Clear TX320 Error Registers

Clear error registers of TX320. Requires one input location.

TABLE 7-11. P127 Command 5: Clear Error Registers

In Loc Contents

1 Result Code

Result code of 0 indicates success. Command 5 is used to erase all errors from

the error registers of the TX320.

7.6.5.7 P127, Command 6: Return TX320 to Online Mode

Command 6 is used to return the TX320 to online mode. Typically used after a

forced random transmission. The TX320 has an offline time-out of one hour.

TABLE 7-12. P127 Command 6: Force Online Mode

In Loc Contents

1 Result code

Result code of 0 indicates success.

7.6.6 Edlog Programming Examples

Edlog Instruction 126 is used to copy data from the datalogger final storage

area to the TX320 data buffer.

Edlog program example 1 writes data to final storage once an hour and

transfers data to the TX320 once every 4 hours.

; Edlog Program Example 1

; Set output flag high hourly

1: If time is (P92)

1: 0 Minutes (Seconds --) into a

2: 60 Interval (same units as above)

3: 10 Set Output Flag High (Flag 0)

; Write a time stamp to final storage

2: Real Time (P77)

1: 1221 Year,Day,Hour/Minute,Seconds (midnight = 2400)

; Write 41 input locations to final storage

3: Sample (P70)

1: 41 Reps

2: 1 Loc [ Status_RC ]

; Check if top of 4 hour interval, if true execute P126