Manual

TX320 Transmitter

FIGURE 8-1. Settings Editor | Status in Device Configuration Utility

8.4 Using Device Configuration Utility for Troubleshooting/

Testing

8.4.1 Setting Editor | GPS

This tab displays information about the GPS communication (see FIGURE

8-2). The GPS is required for proper operation. After the transmitter is reset,

or first powered up, it can’t schedule a transmission until a GPS fix has been

established or the internal clock has been manually set.

If a GPS fix was missed, ensure that the GPS fix interval does not coincide

with the self-timed transmission interval. A GPS Fix event must occur at least

two minutes on either side of a self-timed transmission. Click Apply after

changing the setting.