Full Product Manual

5
Part 2 SPECIFICATIONS
Part 1 PACKAGE LIST
Swift Current Spa
Take all the spa components out of the box and
check your Instruction Manual that all the following key
components are present:
A) Foam Spa Walls x 8 (1 x Foam Panel with Connector holes,
1 x for Suction Line, 1 x Second Suction, 5 x Blank).
B) Thermal Blanket
C) Thermal Groundsheet
D) Spa Base/Liner (with integrated Portable Control
Unit Connectors)
E) Inflatable Cover/Lid
F) Spa Top Liner
G) Portable Control Unit (PCU) with GFCI plug
H) Inflation Hose
I) Drain Hose
J) Spare PCU Connector
K) Filters
L) Wallet includes: Instruction Manual,
Inlet/Outlet Caps x 3, Drain Stopper
Item:
Seating Capacity
Spa Dimension (inner)
Spa Dimension (outer)
Water Capacity
Voltage
Heater
Massage Jet Pump
Filter Pump
Max. Heat Temperature
Spa Lid Material
Liner
Net Weight
Gross Weight
Package Dimensions
Test Certificate (Pump only)
Heating Efficiency (Ambient temperature is 68°F /20°C℃)
CSCHTSC29
5 Persons
63’’ x 29” (160 x 74cm)
73” x 29” (184cm x 74cm)
1000L / 264 US gal
115V 60Hz
1340W
500W
30W
104°F (40°C)
Polyester Laminated PVC+Synthetic leather
Polyester Laminated PVC
105lbs / 48kg
115lbs / 52kg
#1:43”x 28.7”x29.5” / 109.5 x 73 x 75.5cm
#2: 25.8” x 21.4” x 22.8” / 65.5 x 54.5 x 58cm
CETL/ETL
1.5-2℃(°F) /hr
2
1
3
A
D
E
F
G
H
K
L
I
J
B C
Part 3 INSTALLATION
1. Site Selection
IMPORTANT: Before you position, inflate, and fill with water follow these instructions:
1. Place in an area more than 8.2 sq ft (2.5 sq mtrs.)
2. Place spa on a surface that supports more than
100 lb/ft
2
(488 kg/
2
).
3. The spa must be on a clean level ground. If placed
on uneven ground the weight of the spa water
may cause the spa to become distorted; this is not
covered by the manufacturer’s warranty.
Clean surface
Level ground
Ensure no kinked
connectors
Fill the tub up to
the water lines
on both interior
sides of the spa to
ensure the spa is
level.
Place Thermal
Ground Sheet
under spa
X
4