Full Product Manual

ManualsBrandsCanadian Spa Company ManualsHot TubsSwift Current 5-Person Portable Spa

Part 6 : DRAIN & STORE

Drain System

Locate and remove the external threaded Drain Cap. Attach Drain Hose to Drain Outlet.

Locate and remove the stopper on the spa ﬂoor to allow water to drain.

Dry the Spa and Portable Control Unit

After a GFCI test, press the Jet Massage Button to blow out the water inside the jet holes.

Unplug the PCU, remove the ﬁlter cartridge from the Filter Housing and dry the PCU by draining

all water from PCU body and pipes. Open the Drain Valve on the bottom of the PCU, let the water

ﬂow out and close the Drain Valve.

Storage

Use a towel to wipe off the spa and dry for 24 hours. Unscrew the Air Valve on both the

spa and the lid. Once the spa and lid has been deﬂated and the Foam Panels have been

disassembled, gently fold them for storage. It is recommended that you store the spa in its

original package in a warm dry place.

Part 7 PORTABLE CONTROL UNIT FUNCTION

A. Temperature Increase

Button

C. Blower/Jet

massage Button

B. Temperature Decrease

Button

D. Filter Button

E. Heat Button

G. Temperature Mode Button

F. LED Display

Functions of the Spa Portable Control Unit

• LED Display: Once powered-up, the LED display will show the current water

temperature automatically.

• ‘Temperature Adjustment’ Buttons (A & B): Increase (A) Decrease (B). Pressing one

of the temperature adjustment buttons will cause the LED display to ﬂash. When

it is ﬂashing, you can set the desired temperature. The value will increase or decrease

by 1°F/ 1°C for each press. If you hold the button for 2 seconds, the values will

increase/decrease rapidly.

• Temperature Adjustment Ranges: 86°F - 104°F/ 30°C - 39°C To lock the Portable

Control Unit, press (A) + (B) at the same time and hold them for 3 seconds. When the

spa is left unattended please be sure to lock the PCU to avoid having

the settings changed. Unlock the PCU by pressing (A) + (B) at same time

and holding for 3 seconds again.

• ‘Temperature Mode’ Button (G): Press this button to change from Celsius to Fahrenheit.

• ‘Jet Massage’ Button (C): Press this button to activate the Jet Massage system; when

activated a green indicator light turns on and ‘BUB’ is displayed on the screen. It can be

turned off by pressing it again.

NOTE:

• The massage system will stop automatically after 15 minutes of operation. Re-activate

the jet function by pressing the jet button again.

• When the ﬁlter mode is on, pressing the Jet Massage Button (C) will cause the ﬁlter

mode to turn off and the jet massage mode to turn on.

• Heating and jet function can not be activated at same time. When heating system

is working, pressing (C) will change heating mode into jet mode: heating and ﬁltering

are shut down, jet system is activated. If you press (C) again, heating and ﬁltering

mode will re-start.

• Pressing Filter Button (D) activates the ﬁlter system. This button turns the ﬁlter pump on

and off. The green indicator light will turn on when the ﬁltration system is activated.

Note: When heating and ﬁlter functions are working at same time, pressing (D) will shut

down heating and ﬁltering together. When (C) is on, ﬁlter and heating cannot be

activated, therefore (C) should be shut down ﬁrst.

• Pressing the Heat Button (E) activates the heating and ﬁltering system at the same time

The green ﬁlter light and red heat light will be activated at the same time. The PCU

does not stop heating until the current water temperature reaches the set

temperature indicated by the ‘blinking’ red light.

• When you press the Blower Button (C) the circulation pump and the heater will stop, as

a consequence the temperature on the display will decrease (due to no ﬂow of water

between the PCU and the spa). To regain heating functionality turn the Blower Button (C

off and press the Heat Button (E). The circulation pump will restart and the temperature

will increase or the heating mode will restart automatically after the water temperature

drops 1°F/ 1°C (approx) below the set temperature. Max. heat temperature: 104°F (39°C).

Allow 24-48 hours to heat up your spa.

• This spa is equipped with automatic moisture protection which will activate the blower

of the PCU once a day for 90 seconds. This helps to prevent condensation build up and

increase the lifespan of the PCU.

Heater

Port

Blower Port

Air Valve

Filter Housing

Filter Port

Digital Display Pad

The Portable Control Unit

(PCU)