Installation Instructions

Connect (push) electrical wires from fixture into correct inserts.
Black (live),
White (neutral),
Green (ground)
STEP 3
STEP 4
CONNECT LIGHT FIXTURE
STEP 5
STEP 6
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: [phone], Fax: [phone]
L
N
Light
Fixture
(L)
Black
(Live)
(N)
White
(Neutral)
Green
(Ground)
Install specified bulb type and wattage (not included).
Bulb
Spring Clip
Line up the screws in the cover with the key slots in the pan.
Push the cover onto the pan and turn the cover to secure in place.
The cap nut might be re-tightened if the screws can not go into the slot.
Lock the cover in place using the thumb screw.
Glass
Cover
Cover
Slightly push the glass onto the cover.
Ensure the glass is tightenly secured by
the 3 spring clips.
Thumb
Screw
Slot
Screw
2-2
NOTE: The cap nut might be
re-tightened if the screws
can not go into the slot.
Secure the pan to the nipple tightening
by washer and hex nut. Screw the cap nut
to the nipple. Ensure to tighten the cap
nut firmly.
Nipple
Cap nut
Cap nut
Pan
Pan
Washer
Hex Nut