Installation Sheet

INSTALLATION:
SAFETY PRECAUTIONS:
EASY CONNECT®
INSTALLATION INSTRUCTIONS
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
NOTE: Product may not look exactly as shown in figures.
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
DO NOT REMOVE INSULATION FROM FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT
CONDUCTOR.
5. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Tel: [phone], Fax: [phone]
1. Attach nipple to
mounting bracket. Adjust
so it will clear hole in back
of fixture and then lock
nipple in place with star
washer and hex nut.
2. Attach mounting
bracket to electrical box
with electrical box screws
(not included).
3. Option 1: Connect
(push) electrical wires from
electric box (house wiring)
into correct inserts.
Option 2: For multiple
black (live) & white (neutral)
wires joined in the electrical
box (house wiring), attach a
single “black” and “white”
Jumper Wire before
connecting. Strip 7mm
from a 6” Jumper Wires
(AWG 12-24) supplied. Then
connect (push) wires into
correct inserts.
Electrical box
screws
Easy Connect
mounting
bracket
(L)
Black (Live)
(L)
Black (Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White
(Neutral)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Green
(Ground)
Jumper
Wire
Nipple
Hex
Nut
L
N
L
N
L
N
Option 1
Option 2
L
N
4. Connect (push) electrical
wires from fixture into correct
inserts.
5. Once connections of
wires are completed, carefully
tuck wires and wire nuts into
the electrical box making sure
no bare wire (on the black and
white) is visible at the wire
nuts.
6. Secure the pan to the
nipple tightening by star
washer and hex nut. Screw
the finial to the nipple.
7. Install specified bulb type
and wattage (not included).
8. Attach the glass shade to
the fixture using the thumb
screws (tighten with fingers
only).
IFM679A12
IFM623A12
09/16
Nipple
Finial
Pan
Star
Washer
Hex Nut
Star
Washer
(L)
Black (Live)
(N)
White
(Neutral)
Green (Ground)
L
N
Fixture
Shade
Thumb
Screw
Bulb