Installation Sheet

INSTALLATION:
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRE (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
4. CLEAN GLASS WITH WATER ONLY.
LED PENDANT
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
1. Loosen one screw to remove the mounting bracket from the fixture.
2. Install the rods. Install swivel to the rod, ensuring that the sleeve is
at the swivel.
3. Connect the ground wire from your fixture to the ground wire or
ground screw in the electrical outlet box. Connect the black wire
from the fixture to the black wire in the electrical box and connect
the white wire from the fixture to the white wire in the electrical box.
4. IMPORTANT: Once connections of wires are completed, carefully
tuck wires and wire nuts into the outlet box making sure no bare wire is
visible at the wire nuts.
5. Mount the mounting bracket to outlet box using outlet box screws
(not included).
6. Position fixture over the mounting bracket. Line up the screw in the
bracket to the "7" hole on the fixture. Slide fixture to secure in place.
Insert remaining screw. Tighten both screws to secure.
Note: Refer to the style of assembly that matches the style of your
fixture.
7. Style#1: Remove lens cover from socket. Position shade on fixture
and secure with lens cover.
Style#2: Position glass in place and secure with finishing screws.
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Wire Cutters
Pliers Wrench
Wiring supplies
as required by
the Canadian
Electrical Code
and/or the
Quebec
Electrical code
LPL-1
11/14
NOTE: Product may not look exactly as shown in figures.
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-267-4427 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
STYLE#2
STYLE#1
Glass
Finishing
Screws
Shade
Lens Cover
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6,
Tel: [phone], Fax: [phone]
Socket
Rod
Screw
Outlet Box
Screws
Black
House Supply
Ground Wire
Fixture
Ground wire
Red
Outlet box
Sleeve
Swivels
(optional)
White
(Neutral)
Black
(Hot)