Programming instructions

What you need to know before configuring Select Ventilation
11
To add a Power Block
1. In the main window, click Configuration, and then Ventilation.
2. Click Add Power Block.
The Power Block description window displays.
3. Beside Name, type a descriptive name for the Power Block.
4. Beside Address, type the address of the Power Block, exactly as it appears on the product. For
information about where to find the address, see the installation guide for your Power Block.
5. Beside Type, select the model of the Power Block.
6. Beside Building, select the building in which the Power Block is located.
7. If you have a PBx Power Block that is connected to a Phason Wireless Adapter (PWA), beside
Wireless adapter, select the address of the PWA.
8. Click OK to save the information and return to the Configuration window.
 When you add a PB-1 to PB-6 Power Block, you need to log in the Power Block
before Select Ventilation can use it. For more information, read Logging in new
Power Blocks on page 12.
 PB-1 to PB-6 Power Blocks cannot use Phason wireless adapters. Phason
wireless adapters are compatible only with PBx Power Blocks.
 When you add a Power Block, its status is automatically set to active. If you want
the Power Block to be inactive, follow the instructions for Activating and
deactivating Power Blocks on page 13.
To edit a Power Block
1. In the main window, click Configuration, and then Ventilation.
2. Below Your Power Blocks, select the Power Block you want to edit and then click Edit Power
Block.
The Power Block description window displays.