Programming instructions

Programming equipment settings
51
The Ventilation settings window is where you program actuator settings.
A These buttons display the actuator settings.
B This is where you enable or disable the actuator jam alarm. There is a check mark in the box
when the alarm is enabled. This feature is available only for PBx Power Blocks.
Stage 0 set point
(minimum set point)
Stage 1 set point
Stage 1 differential
Stage 2 set point
Stage 2 differential
Stage 3 set point
Stage 3 differential
Stage 4 set point
Stage 4 differential
Stage 4 position Stage 2 position Stage 1 position
Stage 0 position
(minimum position)
Stage 3 position
Temperature
Position
A
D
C
B