Manualshelf

Programming instructions

ManualsBrandsCanarm ManualsFanPLF12
81828384858687888990
Select Ventilation reports
75
Formats, dates, and other information
The following table shows the formats available, date type, and other information required for the
reports, viewer, and chart.
Name Format Date type Other information
Ventilation Temperature Report Preview/PDF/CSV Date range Power Block(s)
Ventilation Status Report Preview/PDF Current Power Block(s)
Ventilation Settings History Report Preview/PDF Current or specific settings change Power Block
PBx Relay Runtime Report Preview/PDF Date range PBx only
Power Block status viewer Viewer Current Power Block
Temperature chart Chart Date range Power Block
To create Ventilation Temperature Reports
1. In the main window, click Reports, and then Ventilation.
2. Below Reports, select Temperature report.
The window updates and adds additional information.
3. Below Your Power Blocks, select one or more of Power Blocks.
4. Below Dates, select the start and end dates. For more information, read Selecting dates on page
77.
5. If you want to export the data to third-party software, below Report format, select CSV.
6. Below Sampling, select Point data or Average data.
7. Below Sample interval, click and drag the number for hour or minutes up or down. You can also
click the number and then press UP or DOWN on your keyboard.
8. Click Create report.
If you created a preview/PDF report, OMNI-Select displays your report in the Report Preview
window. From here, you can print or save your report by clicking the appropriate button.
If you created a CSV report, the Save As window displays so that you can select a location
and save your report. After saving your report, it displays in your default editor.
In Windows Vista and Windows 7, the default reports directory is
C:\Users\<username>\Documents\Phason\OmniSelect\Reports.
<username> is the name you use to log on to your computer.
In Windows XP, it is C:\Documents and Settings\<username>\My
Documents\Phason\OmniSelect\Reports.
Reports print to the default printer using the default settings.
9. Click Close to return to the Reports window.