Programming instructions

88
Heating and cooling elements worksheet
There are two types of heating and cooling element setups: standard and duty cycle. Programming a
standard element means programming the temperature set point. Programming a duty cycle means
programming the temperature set point and the ON and OFF durations.
For more information, read Programming heating, cooling, and duty-cycle relays on page 56.
Information
Name Address
Building Type
Setting Relay 1 Relay 2 Relay 3 Relay 4 Relay 5
Configuration Heat Cool Heat Cool Heat Cool Heat Cool Heat Cool
Set point
On duration : : : : : : : : : :
Off duration : : : : : : : : : :
Setting Relay 6 Relay 7 Relay 8 Relay 9
Configuration Heat Cool Heat Cool Heat Cool Heat Cool
Set point
On duration : : : : : : : :
Off duration : : : : : : : :
 Temperature in °F/°C, range: 14.0 to 122.0°F, –10.0 to 50.0°C
 For duty cycle relays, duration in h:mm:ss, range: 5 seconds to 5 hours, in 1 second increments