Owner's Manual

W-13
Basic Operation and Settings
Wireless connection status can be checked with the camera’s <k>
lamp.
Wireless Connection Status
<k> lamp
Connection Status <k> Lamp
Connected On
Data is being sent or
received
Blinking rapidly
Waiting for connection/
Waiting for reconnection
Blinking
Connection error
Blinking
somewhat
rapidly
Cable Connection Cautions
 When [53: Wi-Fi/NFC] is set to [Enable], connection via interface cable
or HDMI cable is disabled. Set [53: Wi-Fi/NFC] to [Disable] before
connecting a cable.
 When the camera is connected to Connect Station, a computer, printer,
GPS receiver, TV set, or any other device via a cable, settings for [Wi-Fi/
NFC] cannot be changed. Disconnect the cable before changing any
settings.
Cards
 If there is no card in the camera, it cannot be connected wirelessly.
Additionally, for [l] and [m], the camera cannot be connected
wirelessly if there are no images saved on the card.
Using an Eye-Fi Card
 When [53: Wi-Fi/NFC] is set to [Enable], image transfer using an Eye-Fi
card is disabled.