Instruction Manual Instruction manuals (PDF files) and software can be downloaded from the Canon Web site (p.4, 315). www.canon.
Introduction The EOS REBEL T7 or EOS 1500D is a digital single-lens reflex camera featuring a fine-detail CMOS sensor with approx. 24.1 effective megapixels, DIGIC 4+, high-precision and high-speed 9-point AF, approx. 3.0 shots/sec. continuous shooting, Live View shooting, Full High-Definition (Full HD) movie shooting, and Wi-Fi/NFC (wireless communication) function. Before Starting to Shoot, Be Sure to Read the Following To avoid botched pictures and accidents, first read the “Safety Instructions” (p.
Item Check List Before starting, check that all the following items are included with your camera. If anything is missing, contact your dealer. Camera (with eyecup and body cap) Strap Battery Pack LP-E10 (with protective cover) Battery Charger LC-E10/LC-E10E* * Battery Charger LC-E10 or LC-E10E is provided. (The LC-E10E comes with a power cord.) The camera does not come with the Software CD-ROM, an interface cable or HDMI cable. The Instruction Manuals provided are listed on the next page.
Instruction Manuals Camera and Wireless Function Basic Instruction Manual The booklet is the Basic Instruction Manual. More detailed Instruction Manuals (PDF files) can be downloaded from the Canon Web site. Downloading and Viewing the Instruction Manuals (PDF Files) 1 Download the Instruction Manuals (PDF files). Connect to the Internet and access the following Canon Web site. www.canon.com/icpd Select your country or region of residence and download the Instruction Manuals.
Compatible Cards The following cards can be used with the camera regardless of capacity: If the card is new or was previously formatted by another camera or computer, it is recommended that you format the card with this camera (p.52). • SD memory cards • SDHC memory cards • SDXC memory cards The camera can use UHS-I cards, but since it is not compatible with the UHS-I standard, writing/reading speeds will be equivalent to SD Speed Class 10 at most.
Quick Start Guide 1 Insert the battery (p.36). To charge the battery, see page 34. 2 Insert the card (p.36). With the card’s label facing toward the back of the camera, insert it into the card slot. 3 White index Red index Attach the lens (p.44). Align the lens’s white or red mount index with the camera’s mount index of the same color to attach the lens. 4 Set the lens’s focus mode switch to (p.44). 5 Set the power switch to <1> (p.39).
Quick Start Guide 6 Set the Mode Dial to (Scene Intelligent Auto) (p.58). 7 Focus on the subject (p.47). Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus on the subject. If necessary, the built-in flash will be raised. 8 Take the picture (p.47). Press the shutter button completely to take the picture. 9 Review the picture. All the necessary camera settings will be set automatically.
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. : Indicates the cross keys on the top, bottom, left, and right. <0> : Indicates the Setting button. 0, 9, 7, 8 : Indicates that each function remains active for approx. 4 sec., 6 sec., 10 sec., or 16 sec. after you let go of the button.
Chapters Introduction 1 2 3 4 5 6 7 8 9 10 11 12 13 2 Getting Started 33 Basic Shooting and Image Playback 57 Creative Shooting 85 Advanced Shooting Shooting with the LCD Monitor (Live View Shooting) 107 139 Shooting Movies 159 Handy Features 183 Image Playback 207 Post-Processing Images 235 Printing Images 241 Customizing the Camera 257 Reference 269 Software Start Guide / Downloading Images to a Computer 313 9
Contents at a Glance Shooting Shoot automatically p.57-82 (Basic Zone modes) Shoot continuously p.102 (i Continuous shooting) Take a picture of yourself in a group p.103 (j Self-timer) Freeze the action Blur the action p.108 (s Shutter-priority AE) Blur the background p.64 (C Creative Auto) Keep the background in sharp focus p.110 (f Aperture-priority AE) Adjust the image brightness (exposure) p.116 (Exposure compensation) Shoot in low light p.
Take many pictures p.88 (7a, 8a, b, c) Focusing Change the point of focus p.99 (S AF point selection) Shoot a moving subject p.70, 98 (AI Servo AF) Playback View the images on the camera p.83 (x Playback) Search for pictures quickly p.208 (H Index display) p.209 (I Image browsing) Rate images p.212 (Ratings) Prevent important images from accidental deletion p.228 (K Image protect) Delete unnecessary images p.230 (L Delete) Auto play back photos and movies p.
Index to Features Power Battery • Charging • Installing/Removing • Battery level Image Quality Image-recording quality p.88 p.34 p.36 p.40 Household power outlet p.270 Auto power off p.39 Cards Installing/Removing p.36 Formatting p.52 Release shutter without card p.184 Lens Attaching/Detaching p.44 Zoom p.45 Basic Settings Picture Style p.95 White balance p.131 Color space p.137 Image enhancement features • Auto Lighting Optimizer p.
Index to Features Exposure Exposure compensation p.116 AEB p.118 AE lock p.120 Flash p.104 Image browsing (Jump display) p.209 Magnified view p.210 Image rotate p.211 Rating p.212 Movie playback p.218 Editing out movie’s first/last scene p.220 Slide show p.222 p.226 Built-in flash • Flash exposure compensation • FE lock p.117 p.121 External flash p.272 Viewing images on a TV set Flash control p.198 Protect p.228 Erase p.
Contents Introduction 2 Item Check List................................................................................. 3 Instruction Manuals .......................................................................... 4 Compatible Cards............................................................................. 5 Quick Start Guide ............................................................................. 6 Conventions Used in this Manual..................................................... 8 Chapters.
Contents 2 Basic Shooting and Image Playback 57 A Fully Automatic Shooting (Scene Intelligent Auto) ...................58 A Full Auto Techniques (Scene Intelligent Auto)..........................61 7 Disabling Flash ......................................................................... 63 C Creative Auto Shooting.............................................................64 2 Shooting Portraits ...................................................................... 67 3 Shooting Landscapes ..........
Contents 4 Advanced Shooting 107 s: Conveying the Subject’s Movement ..................................... 108 f: Changing the Depth of Field .................................................110 Depth-of-Field Preview ...............................................................112 a: Manual Exposure ....................................................................113 q Changing the Metering Mode ..................................................115 Setting Exposure Compensation ...................
Contents 6 Shooting Movies 159 k Shooting Movies .....................................................................160 Autoexposure Shooting ..............................................................160 Manual Exposure Shooting ........................................................162 Shooting Function Settings ...........................................................167 Setting the Movie Recording Size.................................................168 Shooting Video Snapshots..............
Contents 8 Image Playback 207 x Searching for Images Quickly ................................................ 208 u/y Magnified View ................................................................... 210 b Rotating the Image ...................................................................211 Setting Ratings ............................................................................. 212 Q Quick Control for Playback ..................................................... 214 k Enjoying Movies ........
Contents 11 Customizing the Camera 257 Setting Custom Functions............................................................. 258 Custom Function Settings............................................................. 260 C.Fn I: Exposure ........................................................................ 260 C.Fn II: Image ............................................................................262 C.Fn III: Autofocus/Drive ............................................................ 264 C.
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children. A strap wrapped around a person’s neck may result in strangulation. The parts or provided items of cameras or accessories are dangerous if swallowed. If swallowed, seek immediate medical assistance.
Safety Instructions Observe the following instructions when using a battery charger or AC adapter. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. • Do not use the product if the power plug is not fully inserted into the power outlet. • Do not expose the power plug and terminals to dirt or let them come into contact with metallic pins or other metal objects.
Safety Instructions CAUTION: Denotes the risk of injury. Do not fire the flash near the eyes. It may hurt the eyes. Strap is intended for use on the body only. Hanging the strap with any product attached on a hook or other object may damage the product. Also, do not shake the product or expose the product to strong impacts. Do not apply strong pressure on the lens or allow an object to hit it. This may cause injury or damage to the product. Flash emits high temperatures when fired.
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Handling Precautions If condensation forms on the camera, do not use the camera. This is to avoid damaging the camera. If there is condensation, remove the lens, card and battery from the camera, and wait until condensation has evaporated before using the camera. If the camera will not be used for an extended period, remove the battery and store the camera in a cool, dry, well-ventilated location.
Handling Precautions Cards To protect the card and its recorded data, note the following: Do not drop, bend, or wet the card. Do not subject it to excessive force, physical shock, or vibration. Do not touch the card’s electronic contacts with your fingers or anything metallic. Do not affix any stickers, etc. on the card. Do not store or use the card near anything that has a strong magnetic field, such as a TV set, speakers, or magnets. Also avoid places prone to having static electricity.
Nomenclature Built-in flash/AF-assist beam emitter (p.104/100) Mode Dial (p.30) Power switch (p.39) EF Lens mount index (p.44) Flash button (p.104) EF-S Lens mount index (p.44) <6> Main Dial Hot shoe Microphone (p.160, 178) Shutter button (p.47) Focal plane mark (p.69) Speaker (p.218) Red-eye reduction/ Self-timer lamp (p.106/103) Strap mount (p.33) Grip p (N-Mark)* Mirror (p.204) Terminal cover Contacts (p.25) Lens mount Lens lock pin Lens release button (p.
Nomenclature Live View shooting/ Movie shooting button (p.140/160) Dioptric adjustment knob (p.46) Eyecup (p.271) Display button (p.54, 83, 142, 164, 193) AE lock/ FE lock button/Index/ Reduce button (p.120/121/208/210, 249) Viewfinder eyepiece AF point selection button/ Magnify button (p.99/210, 249) LCD monitor (p.50, 185) DC cord hole (p.270) Aperture/ Exposure compensation button/ Erase button (p.113/116/230) Quick Control button (p.
Nomenclature Shooting Function Settings (in Creative Zone modes, p.30) c Main Dial pointer (p.107) Shooting mode Exposure level indicator Exposure compensation amount (p.116) AEB range (p.118) Shutter speed Aperture Auto Lighting Optimizer (p.123) ISO speed (p.92) Highlight tone priority (p.263) Picture Style (p.95) y Flash exposure compensation (p.117) 0 External flash exposure compensation AF operation (p.97) X: One-Shot AF 9: AI Focus AF Z: AI Servo AF MF: Manual Focus Raise built-in flash (p.
Nomenclature Viewfinder Information AF point activation indicator <•> Focusing screen AF point ISO speed White balance correction AE lock/ AEB in-progress Focus indicator Maximum burst Flash-ready FE lock out of range warning <0> Monochrome shooting ISO speed High-speed sync (FP flash) FE lock/ FEB in-progress Flash exposure compensation Highlight tone priority Exposure level indicator Exposure compensation amount AEB range Red-eye reduction lamp ON Aperture Shut
Nomenclature Mode Dial The Mode Dial includes the Basic Zone modes, Creative Zone modes, and the Movie shooting mode. Creative Zone These modes give you more control for shooting various subjects as desired. d : Program AE (p.86) s : Shutter-priority AE (p.108) f : Aperture-priority AE (p.110) a : Manual exposure (p.113) Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting. A : Scene Intelligent Auto (p.58) 7 : Flash Off (p.
Nomenclature Battery Charger LC-E10 Charger for Battery Pack LP-E10 (p.34). Power plug Charge lamp Full-charge lamp Battery pack slot IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. Battery Charger LC-E10E Charger for Battery Pack LP-E10 (p.34).
1 Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations. Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The eyepiece cover is attached to the strap (p.271).
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. the battery. 2 Attach As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E10 the battery. 3 Recharge For LC-E10 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Charge the battery before use. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. After recharging the battery, detach it and disconnect the charger from the power outlet. When not using the camera, remove the battery.
Installing and Removing the Battery and Card Load a fully charged Battery Pack LP-E10 into the camera. You can use an SD, SDHC, or SDXC memory card (sold separately) with the camera. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing and erasing. Installing the Battery and Card 1 Open the cover. Slide the lever as shown by the arrows and open the cover. the battery. 2 Insert Insert the end with the electrical contacts.
Installing and Removing the Battery and Card After opening the card slot/battery compartment cover, be careful not to forcefully swing it back further. Otherwise, the hinge may break. The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [z1: Release shutter without card] to [Disable] will prevent you from shooting without a card inserted (p.184). Removing the Battery and Card the power switch to <2> 1 Set (p.39). the cover.
Installing and Removing the Battery and Card When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot/battery compartment cover. Also, never do any of the following while the access lamp is lit or blinking. Otherwise, it can damage the image data, card, or camera. • Removing the card. • Removing the battery. • Shaking or banging the camera around.
Turning on the Power If you turn on the power and the date/time/zone setting screen appears, see page 41 to set the date/time/zone. <1> : The camera turns on. <2> : The camera is turned off and does not function. Set to this position when not using the camera. 3 Auto Power Off To save battery power, the camera turns off automatically after approx. 30 seconds of non-operation. To turn on the camera again, just press the shutter button halfway (p.47).
Turning on the Power z Battery Level Indicator When the power is turned on, the battery level will be indicated in one of the four levels. z : Battery level is sufficient. x : Battery level is low, but the camera can still be used. c : Battery will be exhausted soon. (Blinks) n : Recharge the battery. Number of Possible Shots with Viewfinder Shooting (Approx.
3 Setting the Date, Time, and Zone When you turn on the power for the first time or if the date/time/zone have been reset, the date/time/zone setting screen will appear. Follow the steps below to set the time zone first. Set the camera to the time zone in which you currently live so that, when you travel, you can simply change the setting to the correct time zone for your destination, and the camera will automatically adjust the date/time.
3 Setting the Date, Time, and Zone the date and time. 4 Set Press the keys to select the number. Press <0> so is displayed. Press the keys to set the number, then press <0>. (Returns to .) the daylight saving time. 5 Set Set it if necessary. Press the keys to select [Y]. Press <0> so is displayed. Press the keys to select [Z], then press <0>. When the daylight saving time is set to [Z], the time set in step 4 will advance by 1 hour.
3 Selecting the Interface Language 1 Display the menu screen. Press the button to display the menu screen. the [52] tab, select 2 Under [LanguageK]. Press the keys to select the [52] tab. Press the keys to select the [LanguageK], then press <0>. the desired language. 3 Set Press the and keys to select the language, then press <0>. The interface language will change.
Attaching and Detaching a Lens The camera is compatible with all Canon EF and EF-S lenses. The camera cannot be used with EF-M lenses. Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’s red or white index White index with the camera’s index matching the same color. Turn the lens as shown by the arrow until it clicks in place. Red index the lens’s focus mode switch 3 Set to .
Attaching and Detaching a Lens Zooming Turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens. Doing so may cause loss of vision.
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right so that the AF points (nine boxes) in the viewfinder look the sharpest. If the knob is difficult to turn, remove the eyecup (p.271). If the camera dioptric adjustment still cannot provide a sharp viewfinder image, using E-series Dioptric Adjustment Lenses (sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake.
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder (0). While you press the shutter button halfway, the LCD monitor will turn off (p.197).
Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor. This is called Quick Control. 1 Press the button. The Quick Control screen will appear (7). the desired function. 2 Set Press the cross keys to select a function. The settings of the selected function and Feature guide (p.55) will appear. Turn the <6> dial to change the setting. You can also select from a list by selecting a function and pressing <0>.
Q Quick Control for Shooting Functions Sample Quick Control Screen Shutter speed (p.108) Shooting mode* (p.30) Aperture (p.110) Highlight tone priority* (p.263) ISO speed (p.92) Exposure compensation/ AEB setting (p.116, 118) Picture Style (p.95) AF operation (p.97) White balance (p.131) Drive/self-timer (p.102-103) Flash exposure compensation (p.117) Raise built-in flash Auto Lighting Optimizer (p.123) Image-recording quality (p.88) Metering mode (p.
3 Menu Operations You can set various settings with the menus such as the imagerecording quality, date and time, etc. <0> button cross keys LCD monitor button Menu Screen The menu tabs and items displayed will differ depending on the shooting mode.
3 Menu Operations Menu Setting Procedure 1 Display the menu screen. Press the button to display the menu screen. a tab. 2 Select Press the cross keys to select a tab (group of functions). For example, in this manual, “the [z3] tab” refers to the screen displayed when the third z (Shooting) tab from the left [L] is selected. the desired item. 3 Select Press the cross keys to select the item, then press <0>. the setting.
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with this camera. When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. Make sure to transfer the indispensable data to a computer, etc. before formatting the card. 1 Select [Format card]. Under the [51] tab, select [Format card], then press <0>. the card.
3 Formatting the Card Format the card in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed (p.298). Low-level Formatting Perform low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase data on the card.
Switching the LCD Monitor Display The LCD monitor can display the shooting settings screen, menu screen, captured images, etc. Shooting Function Settings When you turn on the power, the shooting settings will be displayed. When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on. You can also turn off the display by pressing the button. Press the button again to turn on the display.
Feature Guide The Feature guide appears when you change the shooting mode or set a shooting function, Live View shooting, movie shooting, or Quick Control for playback, and it displays a brief description of that mode, function or option. It displays the description when you select a function or option with the Quick Control. The Feature guide turns off when you further proceed with any operation.
2 Basic Shooting and Image Playback This chapter explains how to use the Basic Zone modes on the Mode Dial for best results and how to play back images. With Basic Zone modes, all you do is point and shoot while the camera sets everything automatically (p.75, 276). Also, to prevent botched pictures due to mistaken operations, advanced shooting function settings cannot be changed. Ba s ic Zone Auto Lighting Optimizer In Basic Zone modes, the Auto Lighting Optimizer (p.
A Fully Automatic Shooting (Scene Intelligent Auto) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It also adjusts focus automatically by detecting whether the subject is still or moving (p.61). 1 AF point Set the Mode Dial to . any AF point over the 2 Aim subject. All the AF points will be used to focus, and the camera will normally focus on the closest object. Aiming the center AF point over the subject will make focusing easier.
A Fully Automatic Shooting (Scene Intelligent Auto) the picture. 4 Take Press the shutter button completely to take the picture. The captured image will be displayed for approx. 2 sec. on the LCD monitor. After you finish shooting, push down the built-in flash with your fingers. The mode makes the colors look more impressive in nature, outdoor, and sunset scenes.
A Fully Automatic Shooting (Scene Intelligent Auto) The flash fired even though it was daylight. For a backlit subject, the flash may fire to help lighten the subject’s dark areas. If you do not want the flash to fire, use the Flash off mode (p.63). Other than the flash setting, the camera will shoot with the same settings as with . The flash fired and the picture came out extremely bright. Move further away from the subject and shoot.
A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the mode, pressing the shutter button halfway to focus on a still subject will lock the focus on that subject. Recompose the shot while keeping the shutter button pressed halfway, and then press the shutter button completely to take the picture. This is called “focus lock”.
A Full Auto Techniques (Scene Intelligent Auto) A Live View Shooting You can shoot while viewing the image on the LCD monitor. This is called “Live View shooting”. For details, see page 139. 1 Display the Live View image on the LCD monitor. Press the button. The Live View image will appear on the LCD monitor. on the subject. 2 Focus Aim the center AF point < > on the subject. Press the shutter button halfway to focus.
7 Disabling Flash The camera analyzes the scene and sets the optimum settings automatically. In places where flash photography is prohibited such as in a museum or an aquarium, use the <7> (Flash Off) mode. This mode is also effective for capturing the particular ambience of a scene, such as candlelight scenes. Shooting Tips Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks.
C Creative Auto Shooting In the mode, you can easily change the depth of field, drive/selftimer, and flash firing. You can also select and shoot with the ambience you want to convey in your images. The default settings are the same as the mode. * CA stands for Creative Auto. 1 Set the Mode Dial to . the button (7). 2 Press The Quick Control screen will appear. the desired function. 3 Set Press the cross keys to select a function.
C Creative Auto Shooting (1) Shutter speed Aperture ISO speed (2) (3) Battery level (4) Possible shots Image-recording quality Pressing the button enables you to set the following: (1) Ambience-based shots You can select and shoot with the ambience you want to convey in your images. Press the keys or turn the <6> dial to select the ambience. You can also select it from a list by pressing <0>. For details, see page 76.
C Creative Auto Shooting (3) Drive/self-timer: Press <0> and set it with the keys or <6> dial. Single shooting: Shoot one image at a time. Continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to approx. 3 shots per second. Self-timer: 10 sec. : The picture is taken 10 seconds after you press the shutter button.
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. Use a telephoto lens.
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end. It also adds breadth to landscapes. When shooting night scenes. Since the built-in flash will be disabled, this mode <3> is also good for night scenes.
4 Shooting Close-ups When you want to shoot flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject. Check the lens for its minimum focusing distance. Some lenses have indications such as on them.
5 Shooting Moving Subjects Use the <5> (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips Use a telephoto lens. The use of a telephoto lens is recommended for shooting from a distance. Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator will blink.
P Shooting Food When shooting food, use
(Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips Change the color tone. You can change [Color tone]. To increase the food’s reddish tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red. Avoid using flash. If you use flash, the light may reflect off the dish or food and results in unnatural shadows.
6 Shooting Night Portraits To shoot people at night and obtain a natural-looking night scene in the background, use the <6> (Night Portrait) mode. Using a tripod is recommended. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod to prevent camera shake. Check the subject’s brightness. Under low light, the built-in flash will fire automatically to obtain a good exposure of the subject.
6 Shooting Night Portraits During Live View shooting, it may be difficult to focus on dots of light such as in a night scene. In such a case, it is recommended that you set the AF method to [Quick mode] and shoot. If it is still difficult to focus, set the lens’s focus mode switch to and focus manually. Tell the subject to keep still even after the flash fires. If you use the self-timer together with flash, the self-timer lamp will light up briefly after the picture is taken.
Q Quick Control In Basic Zone modes, when the shooting function settings are displayed, you can press the button to display the Quick Control screen and can set the functions shown in the table on the next page. Example: Portrait mode the Mode Dial to a Basic Zone 1 Set mode. the button (7). 2 Press The Quick Control screen will appear. the desired function. 3 Set Press the cross keys to select a function. (This step is not necessary in the A/7 mode.
Q Quick Control Settable Functions in Basic Zone Modes o: Default setting k: User selectable Function u: Single shooting A 7 C o o o k o k k k k k i: Continuous shooting Drive/ self-timer (p.102-103) j: 10 sec. q: Continuous shooting* a: Automatic firing o Built-in flash D: Flash on (Fires at firing all times) b: Flash off Ambience-based shots (p.76) 3 4 o o k k k k k k k o o 5 P 6 o o k k k k k k o o o k o k k k Light/scene-based shots (p.
Shooting with Ambience Selection Except in the and <7> Basic Zone modes, you can select the ambience for shooting.
Shooting with Ambience Selection the ambience effect. 4 Set Press the keys to select the effect so that [Effect] appears at the bottom. Press the keys or turn the <6> dial to select the desired effect. the picture. 5 Take Press the shutter button completely to take the picture. To return to viewfinder shooting, press the button to exit Live View shooting. Then press the shutter button completely to take the picture.
Shooting with Ambience Selection Ambience Settings (1) Standard setting Standard image characteristics for the respective shooting mode. Note that <2> has image characteristics geared for portraits and <3> is geared for landscapes. Each ambience is a modification of the respective shooting mode’s image characteristics. (2) Vivid The subject will look sharp and vivid. It makes the photo look more impressive than with [Standard setting]. (3) Soft The subject will look softer and more dainty.
Shooting with Ambience Selection (7) Brighter The picture will look brighter. (8) Darker The picture will look darker. (9) Monochrome The picture will be monochrome. You can select the monochrome color to be blue, black and white, or sepia. When [Monochrome] is selected, <0> will appear in the viewfinder.
Shooting by Lighting or Scene Type In the <2>, <3>, <4>, and <5> Basic Zone modes, you can shoot with the settings matching the lighting or scene type. Normally, [Default setting] is adequate, but if the settings match the lighting condition or scene, the picture will look more accurate to your eyes. For Live View shooting, if you set both [Light/scene-based shots] and [Ambience-based shots] (p.76), you should first set [Light/scenebased shots].
Shooting by Lighting or Scene Type Quick Control, select the 3 With lighting or scene type. Press the button (7). Press the keys to select [Default setting]. [Light/scenebased shots] will appear on the screen. Press the keys or turn the <6> dial to select the lighting or scene type. The resulting image with the selected lighting or scene type will be displayed. the picture. 4 Take Press the shutter button completely to take the picture.
Shooting by Lighting or Scene Type Lighting or Scene Type Settings (1) Default setting Default setting suited for most subjects. (2) Daylight For subjects under sunlight. Gives more natural-looking blue skies and greenery and reproduces light-colored flowers better. (3) Shade For subjects in the shade. Suitable for skin tones, which may look too bluish, and for light-colored flowers. (4) Cloudy For subjects under overcast skies.
x Image Playback The easiest way to play back images is explained below. For more details on the playback procedure, see page 207. 1 Play back the image. Press the button. The last image captured or played back will appear. an image. 2 Select To view images starting with the last captured image, press the key. To view images starting with the first (oldest) image, press the key. Each time you press the button, the information display will change.
3 Creative Shooting In the Basic Zone modes, to prevent spoiled shots, most advanced functions are set automatically and cannot be changed. In the (Program AE) mode, you can set various functions and be more creative. In the mode, the camera sets the shutter speed and aperture automatically to obtain the standard exposure. The difference between the Basic Zone modes and is explained on pages 276-277.
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * stands for Program. * AE stands for Auto Exposure. 1 Set the Mode Dial to . on the subject. 2 Focus Look through the viewfinder and aim the selected AF point over the subject. Then press the shutter button halfway.
d: Program AE Shooting Tips Change the ISO speed. Use the built-in flash. To match the subject and ambient lighting level, you can change the ISO speed (p.92) or use the built-in flash (p.104). In the mode, the built-in flash will not fire automatically. When indoors or during low light shooting, it is recommended that you press the (flash) button to raise the built-in flash. (You can also raise the built-in flash by selecting with the Quick Control.) Change the program using Program shift.
3 Setting the Image-Recording Quality You can select the pixel count and the image quality. Ten imagerecording quality settings are provided: 73, 83, 74, 84, 7a, 8a, b, c, 1+73, 1. 1 Select the image-recording quality. Under the [z1] tab, select [Image quality], then press <0>. [Image quality] will appear. Pixels recorded (pixel count) Possible shots the image-recording quality.
3 Setting the Image-Recording Quality Guide to Image-Recording Quality Settings (Approx.) Image Quality 73 83 74 84 High quality b 24M Medium quality 11M JPEG 7a 8a 5.9M Low quality c 1+73 1 Pixels Recorded (megapixels) High quality File Size (MB) Possible Shots Maximum Burst 7.5 940 150 3.7 1920 Full 3.9 1820 Full 1.9 3580 Full 2.4 2880 Full 1.3 5440 Full 2.5M 1.3 5440 Full 0.3M 0.3 19380 Full 30.3+7.5 180 6 30.
3 Setting the Image-Recording Quality FAQ I want to select the image-recording quality matching the paper size for printing. Refer to the diagram on the left when Paper size choosing the image-recording quality. If A2 (59.4x42 cm/23.4x16.5 in.) you want to crop the image, selecting a 73 higher quality (more pixels) such as 73, 83 A3 (42x29.7 cm/ 83, 1+73, or 1 is recommended. 16.5x11.7 in.) 1+73 1 b is suitable for playing back the image 74 84 7a with a commercially-available digital b 8a photo frame.
3 Setting the Image-Recording Quality 1 1 is the raw image data before it is made into 73 or other images. 1 images cannot be viewed on a computer without the use of software, such as Digital Photo Professional (EOS software, p.314). However, you can perform various adjustments on them that are impossible with other image types such as 73. 1 is effective when you want to precisely adjust the image yourself or shoot an important subject. 1+73 1+73 records a 1 image and a 73 image with a single shot.
i: Changing the ISO Speed to Suit the Light LevelN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically (p.94). 1 Press the button. [ISO speed] will appear. the ISO speed. 2 Set Press the keys or turn the <6> dial to select the desired ISO speed, then press <0>. With [AUTO] selected, the ISO speed will be set automatically (p.93).
i: Changing the ISO Speed to Suit the Light LevelN When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. If you use a high ISO speed and flash to shoot a close subject, overexposure may result. As “H” (equivalent to ISO 12800) is an expanded ISO speed setting, noise (such as dots of light and banding) and irregular colors will be more noticeable, and the resolution will be lower than usual.
i: Changing the ISO Speed to Suit the Light LevelN Shooting Mode ISO Speed Setting A/7/C/3/4/5/P/6 Automatically set within ISO 100 - ISO 3200 d/s/f/a Automatically set within ISO 100 - ISO 6400*1 2 ISO 100 With flash ISO 800*2*3*4*5 With bulb exposures ISO 800*5 *1: Depends on the maximum ISO speed limit set. *2: If fill-in flash will cause overexposure, ISO speed may be reduced, down to a possible minimum of ISO 100.
A Selecting Optimal Image Characteristics for the SubjectN By selecting a Picture Style, you can obtain image characteristics matching your photographic expression or the subject. In Basic Zone modes, you cannot select the Picture Style. 1 Select [Picture Style]. Under the [z2] tab, select [Picture Style], then press <0>. The Picture Style selection screen will appear. a Picture Style. 2 Select Press the keys to select a Picture Style, then press <0>.
A Selecting Optimal Image Characteristics for the SubjectN R Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes. S Neutral This Picture Style is for users who prefer to process images with their computer. For natural colors and subdued images with modest brightness and color saturation. U Faithful This Picture Style is for users who prefer to process images with their computer.
f: Changing the Autofocus OperationN You can select the AF (autofocus) operation characteristics suiting the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1 Set the lens’s focus mode switch to . the button. 2 Press [AF operation] will appear. the AF operation. 3 Select Press the keys or turn the <6> dial to select the desired AF operation, then press <0>. on the subject.
f: Changing the Autofocus OperationN If focus cannot be achieved, the focus indicator in the viewfinder will blink. If this occurs, the picture cannot be taken even if the shutter button is pressed completely. Recompose the shot and try to focus again, or see “Subjects Difficult to Focus on” (p.101). If [z1: Beep] is set to [Disable], the beeper will not sound when focus is achieved.
S Selecting the AF PointN In Basic Zone modes, the camera will normally focus on the closest subject automatically. Therefore, it may not always focus on your target subject. In the , , , and modes, you can select one AF point and focus only on the area covered by that AF point. 1 Press the button (9). The selected AF point will be displayed on the LCD monitor and in the viewfinder. the AF point. 2 Select Use the cross keys to select the AF point.
S Selecting the AF PointN Shooting Tips When shooting a portrait up close, use One-Shot AF and focus on the eyes. If you set the composition after focusing on the eyes of the person to be photographed, the vivid facial expression will stand out more in the picture. If it is difficult to focus, select and use the center AF point. The center AF point is the most sensitive among the nine AF points.
Subjects Difficult to Focus on Autofocus can fail to achieve focus (viewfinder’s focus indicator blinks) with certain subjects such as the following: Subjects with very low contrast (Example: Blue skies, solid-color flat surfaces, etc.) Subjects in very low light Strongly backlit and reflective subjects (Example: Cars with highly reflective bodies, etc.) Near and distant subjects framed close to an AF point (Example: Animals in cages, etc.
i Continuous ShootingN You can shoot up to approx. 3 shots per second. This is effective for photographing a child running toward you or capturing different facial expressions. 1 Press the button. . 2 Select Press the keys or turn the <6> dial to select continuous shooting , then press <0>. the picture. 3 Take The camera shoots continuously while you hold down the shutter button completely. Shooting Tips Also set the AF operation (p.97) matching the subject.
j Using the Self-timer 1 Press the button. the self-timer. 2 Select Press the keys or turn the <6> dial to select the self-timer, then press <0>. j : Shoot in approx. 10 sec. l: Shoot in approx. 2 sec.N q: Take the set number of shots continuously in approx. 10 sec. Press the keys to set the number of multiple shots (2 to 10) to be taken with the self-timer. the picture. 3 Take Look through the viewfinder, focus on the subject, then press the shutter button completely.
D Using the Built-in Flash In indoor, low light or backlit conditions in daylight, just raise the built-in flash and press the shutter button to take flash pictures. In the mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake. 1 Press the button. In Creative Zone modes, you can press the button anytime to take flash pictures. While the flash is recycling, “DbuSY” is displayed in the viewfinder, and [BUSYD] is displayed on the LCD monitor.
D Using the Built-in Flash Effective Range of Built-in Flash ISO Speed (Approx. in meters / feet) EF-S18-55mm f/3.5-5.6 IS II (p.92) Wide Angle f/3.5 Telephoto f/5.6 ISO 100 1 - 2.6 / 3.3 - 8.5 1 - 1.6 / 3.3 - 5.2 ISO 400 1 - 5.3 / 3.3 - 17.4 1 - 3.3 / 3.3 - 10.8 ISO 800/AUTO* 1 - 7.4 / 3.3 - 24.3 1 - 4.6 / 3.3 - 15.1 ISO 1600 1.3 - 10.5 / 4.3 - 34.4 1 - 6.6 / 3.3 - 21.7 ISO 6400 2.6 - 21.0 / 8.5 - 68.9 1.6 - 13.1 / 5.2 - 43.
D Using the Built-in Flash 3 Red-eye Reduction Using the red-eye reduction lamp before taking a flash picture can reduce red eye. Red-eye reduction will function in any shooting mode except <7>, <3>, <5>, or . Under the [z1] tab, select [Red-eye reduc.], then press <0>. Select [Enable], then press <0>. For flash photography, when you press the shutter button halfway, the red-eye reduction lamp will light up. Then when you press the shutter button completely, the picture will be taken.
4 Advanced Shooting This chapter builds on Chapter 3 and introduces more ways to shoot creatively. The first half of this chapter explains how to use the , , and modes on the Mode Dial. All the functions explained in Chapter 3 can also be used in the , , and modes. To see which functions can be used in each shooting mode, see page 276. The M icon at the upper right of the page title indicates that the function is available only in Creative Zone modes (p.30).
s: Conveying the Subject’s Movement You can either freeze the action or create motion blur with the (Shutter-priority AE) mode on the Mode Dial. * stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) 1 Frozen motion (Fast shutter speed: 1/2000 sec.) Set the Mode Dial to . the desired shutter speed. 2 Set See “Shooting Tips” for advice on setting the shutter speed. Turning the <6> dial to the right sets a faster shutter speed, and turning it to the left sets a slower one.
s: Conveying the Subject’s Movement Shooting Tips To freeze the motion of a fast-moving subject Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. according to the speed of the moving subject. To blur a running child or animal and convey an impression of motion Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow the moving subject through the viewfinder and press the shutter button to take the picture. If you use a telephoto lens, hold it steady to prevent camera shake.
f: Changing the Depth of Field To blur the background or to make everything near and far look sharp, set the Mode Dial to (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * stands for Aperture value, which is the size of the diaphragm hole inside the lens. Blurred background (With a low aperture f/number: f/5.6) Sharp foreground and background (With a high aperture f/number: f/32) 1 Set the Mode Dial to . the desired aperture.
f: Changing the Depth of Field Shooting Tips When using an aperture with a high f/number or shooting in low light scenes, note that camera shake can occur. A higher aperture f/number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec. In such cases, increase the ISO speed and hold the camera steady or use a tripod. The depth of field depends not only on the aperture, but also on the lens and on the subject distance.
f: Changing the Depth of Field D Using the Built-in Flash To obtain a correct flash exposure, the flash output will be set automatically to match the set aperture (autoflash). The shutter speed will be set automatically between 1/200 sec. - 30 sec. to suit the scene’s brightness. In low light, the main subject is exposed with the autoflash, and the background is exposed with a slow shutter speed set automatically.
a: Manual Exposure You can set both the shutter speed and aperture manually as desired. While referring to the exposure level indicator in the viewfinder, you can set the exposure as desired. This method is called manual exposure. * stands for Manual. 1 <6> + <6> Standard exposure index Exposure level mark Set the Mode Dial to . 2 Set the ISO speed (p.92). the shutter speed and aperture. 3 Set To set the shutter speed, turn the <6> dial.
a: Manual Exposure I Using the Built-in Flash To obtain the correct flash exposure on the main subject, the flash output will be set automatically (autoflash) to match the manually-set aperture. The shutter speed can be set from 1/200 sec. to 30 sec. or to bulb. BULB: Bulb Exposures Elapsed exposure time A bulb exposure keeps the shutter open for as long as you hold down the shutter button. It can be used to shoot fireworks and other subjects requiring long exposures.
q Changing the Metering ModeN Three methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, metering mode is set automatically. 1 Select [Metering mode]. Under the [z2] tab, select [Metering mode], then press <0>. the metering mode. 2 Set Select the desired metering mode, then press <0>. q Evaluative metering General-purpose metering mode suited even for backlit subjects.
Setting Exposure CompensationN O Setting Exposure Compensation Set exposure compensation if the exposure (without flash) does not come out as desired. This feature can be used in Creative Zone modes except . You can set the exposure compensation up to ±5 stops in 1/3-stop increments. Making it brighter Hold down the button and turn the <6> dial to the right (increased exposure).
Setting Exposure CompensationN y Setting Flash Exposure Compensation Set flash exposure compensation if the flash exposure of the subject does not come out as desired. You can set the flash exposure compensation up to ±2 stops in 1/3-stop increments. 1 Press the button (7). The Quick Control screen will appear (p.48). [y]. 2 Select Press the cross keys to select [y*]. [Flash exposure comp.] will be displayed at the bottom. the flash exposure 3 Set compensation amount.
3 Auto Exposure BracketingN This feature takes exposure compensation a step further by varying the exposure automatically (up to ±2 stops in 1/3-stop increments) with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure Darker exposure (Decreased exposure) 1 Brighter exposure (Increased exposure) Select [Expo.comp./AEB]. Under the [z2] tab, select [Expo.comp./AEB], then press <0>. the AEB range.
3 Auto Exposure BracketingN Canceling AEB Follow steps 1 and 2 to turn off the AEB range display. The AEB setting will also be canceled automatically if the power switch is set to <2>, flash recycling is completed, etc. Shooting Tips Using AEB with continuous shooting If continuous shooting (p.102) is set and you press the shutter button completely, the three bracketed shots will be taken continuously in this sequence: standard exposure, decreased exposure, and increased exposure.
A Locking the ExposureN You can lock the exposure when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the picture. This is called AE lock. It is effective for shooting backlit subjects, etc. This feature can be used in Creative Zone modes except . 1 Focus on the subject. Press the shutter button halfway.
A Locking the Flash ExposureN If the subject is on the side of the frame and you use flash, the subject may turn out to be too bright or dark depending on the background, etc. Use FE lock in such a case. After setting the flash output for the appropriate subject brightness, you can recompose (put the subject toward the side) and shoot. This feature can also be used with a Canon EX-series Speedlite. * FE stands for Flash Exposure. 1 Press the button. The built-in flash will be raised.
A Locking the Flash ExposureN If the subject is too far away and the captured image comes out dark, the icon will blink. Move closer to the subject and repeat steps 2 to 4. FE lock is not possible during Live View shooting.
3 Auto Correction of Brightness and ContrastN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is applied when the image is captured. In Basic Zone modes, [Standard] is set automatically. 1 Select [Auto Lighting Optimizer]. Under the [z2] tab, select [Auto Lighting Optimizer], then press <0>. the setting.
3 Correcting the Image’s Dark Corners Due to the lens characteristics, the four corners of the picture may look darker. This phenomenon is called lens light fall-off or drop in peripheral illumination and can be corrected. The default setting is [Enable]. With JPEG images, the correction is applied when the image is captured. For RAW images, it can be corrected with Digital Photo Professional (EOS software, p.314). 1 Select [Peripheral illumin. correct.]. Under the [z1] tab, select [Peripheral illumin.
3 Correcting the Image’s Dark Corners Lens Correction Data The camera already contains lens peripheral illumination correction data for approx. 30 lenses. In step 2, if you select [Enable], the peripheral illumination correction will be applied automatically for any lens whose correction data has been registered in the camera. With EOS Utility (EOS software, p.314), you can check which lenses have their correction data registered in the camera.
A Customizing Image CharacteristicsN You can customize a Picture Style by adjusting individual parameters such as [Sharpness] and [Contrast] from the default. To see the resulting effects, take test shots. To customize [Monochrome], see page 128. 1 Select [Picture Style]. Under the [z2] tab, select [Picture Style], then press <0>. The Picture Style selection screen will appear. a Picture Style. 2 Select Select a Picture Style, then press the button. a parameter.
A Customizing Image CharacteristicsN Parameter Settings and Effects Sharpness Adjusts the sharpness of the subject. To make it less sharp, set it toward the E end. The closer it is to E, the softer the image will look. To make it sharper, set it toward the F end. The closer it is to F, the sharper the image will look. Contrast Adjusts the image contrast and the vividness of colors. To decrease the contrast, set it toward the minus end. The closer it is to G, the more muted the image will look.
A Customizing Image CharacteristicsN V Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page. kFilter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N: None Normal black-and-white image with no filter effects. Ye: Yellow The blue sky will look more natural, and the white clouds will look crisper.
A Registering Preferred Image CharacteristicsN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create multiple Picture Styles with different settings for parameters such as sharpness and contrast. You can also adjust the parameters of a Picture Style that is registered to the camera with EOS Utility (EOS software, p.314). 1 Select [Picture Style].
A Registering Preferred Image CharacteristicsN a parameter. 5 Select Select a parameter such as [Sharpness], then press <0>. the parameter. 6 Set Press the keys to adjust the parameter as desired, then press <0>. For details, see “Customizing Image Characteristics” on pages 126-128. Press the button to register the modified Picture Style. The Picture Style selection screen will then reappear. The base Picture Style will be indicated on the right of [User Def. *].
B: Matching the Light SourceN The function adjusting the color tone so that white objects look white in the picture is called white balance (WB). Normally, the Auto [Q] (Ambience priority) or [Qw] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. In Basic Zone modes, [Q] (Ambience priority) is set automatically.
B: Matching the Light SourceN Q Setting the Auto White Balance With [Q] (Ambience priority), you can increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [Qw] (White priority), you can reduce the intensity of the image’s warm color cast. If you want to match the Auto white balance of previous EOS DIGITAL camera models, select [Q] (Ambience priority). the button. 1 Press [White balance] will appear. [Q].
B: Matching the Light SourceN O Custom White Balance Custom white balance enables you to manually set the white balance for a specific light source. Make sure to perform this procedure under the light source at the actual location of the shoot. 1 Shoot a white object. A plain, white object should fill the viewfinder’s center. Focus manually and shoot with the standard exposure set for the white object. You can use any white balance setting. [Custom White Balance].
B: Matching the Light SourceN [O (Custom)]. 4 Select Press the button. Select [O (Custom)], then press <0>. If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. In step 3, the following images cannot be selected: Images captured with the Picture Style set to [Monochrome] (p.96), images processed with a Creative filter, or images shot with another camera.
u Adjusting the Color Tone for the Light SourceN You can correct the white balance that is set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This function is for advanced users, particularly for those users who understand the use of color temperature conversion and color compensating filters and their effects. White Balance Correction 1 Select [WB Shift/Bkt.
u Adjusting the Color Tone for the Light SourceN White Balance Auto Bracketing With just one shot, three images with different color tones can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/ green bias. This is called white balance bracketing (WB Bkt.). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
3 Setting the Color Reproduction RangeN The range of reproducible colors is called “color space”. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In Basic Zone modes, sRGB is set automatically. 1 Select [Color space]. Under the [z2] tab, select [Color space], then press <0>. the desired color space. 2 Set Select [sRGB] or [Adobe RGB], then press <0>.
5 Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the picture on the camera’s LCD monitor. This is called “Live View shooting”. Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended. Remote Live View Shooting With EOS Utility (EOS software, p.
A Shooting with the LCD Monitor 1 Display the Live View image. Press the button. The Live View image will appear on the LCD monitor. The Live View image will closely reflect the brightness level of the actual image you capture. on the subject. 2 Focus When you press the shutter button halfway, the camera will focus with the current AF method (p.148). the picture. 3 Take Press the shutter button completely. The picture is taken and the captured image is displayed on the LCD monitor.
A Shooting with the LCD Monitor Enabling Live View Shooting Set [Live View shoot.] to [Enable]. In Basic Zone modes, the Live View menu options will be displayed under [z2], and in Creative Zone modes, they will be displayed under [z4]. Number of Possible Shots with Live View Shooting (Approx.
A Shooting with the LCD Monitor Information Display Each time you press the button, the information display will change.
A Shooting with the LCD Monitor When is displayed in white, it indicates that the Live View image brightness is close to what the captured image will look like. If is blinking, it indicates that the Live View image is displayed at a brightness that differs from the actual shooting result because of low- or bright-light conditions. However, the actual image recorded will reflect the exposure setting. Note that noise may be more noticeable than the actual image recorded.
Shooting Function Settings Function settings particular to Live View shooting are explained here. Q Quick Control If you press the button while the image is displayed on the LCD monitor in a Creative Zone mode, you can set any of the following: AF method, Drive/self-timer, White balance, Picture Style, Auto Lighting Optimizer, Image-recording quality, and ISO speed. In Basic Zone modes, you can set the functions shown in the table on page 75, as well as the functions in bold above.
Menu Function Settings The menu options displayed are as follows. The settable functions on this menu screen apply only to Live View shooting. They do not work with viewfinder shooting (settings are disabled). In Basic Zone modes, the Live View menu options will be displayed under [z2], and in Creative Zone modes, they will be displayed under [z4]. Live View shooting You can set Live View shooting to [Enable] or [Disable]. AF method You can select [FlexiZone - Single], [u Live mode], or [Quick mode].
Menu Function Settings Aspect ratioN The image’s aspect ratio can be set to [3:2], [4:3], [16:9], or [1:1]. The area surrounding the image area is masked in black when the following aspect ratios are set: [4:3] [16:9] [1:1]. JPEG images will be saved with the set aspect ratio. RAW images will always be saved with the [3:2] aspect ratio. The selected aspect ratio information is added to the RAW image file.
Menu Function Settings Metering timerN You can change how long the exposure setting is displayed (AE lock time). In Basic Zone modes, metering timer is fixed at 8 sec. Any of the following operations will stop Live View shooting. To start Live View shooting again, press the button again. • Selecting [z3: Dust Delete Data], [52: Clean manually], [53: Clear settings], or [53: Firmware Ver.] • Switching the shooting mode (between a Basic Zone mode and a Creative Zone mode).
Using AF to Focus (AF Method) Selecting the AF Method You can select an AF method to suit the shooting conditions and your subject. The following AF methods are provided: [FlexiZone - Single], [u Live mode] (face detection, p.149), and [Quick mode] (p.154). If you want to achieve precise focus, set the lens’s focus mode switch to , magnify the image, and focus manually (p.156). Select the AF method. Under the [z4] tab, select [AF method]. (In Basic Zone modes, it is under the [z2] tab.
Using AF to Focus (AF Method) on the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange. the picture. 4 Take Check the focus and exposure, then press the shutter button completely to take the picture (p.140). u (Face detection) Live Mode: c Human faces are detected and focused on with the same AF method as FlexiZone - Single.
Using AF to Focus (AF Method) on the subject. 3 Focus Press the shutter button halfway and the camera will focus on the face covered by the
frame. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange. If a face cannot be detected, the AF point < > will be displayed and AF will be executed at the center. the picture.
Using AF to Focus (AF Method) Notes for [FlexiZone - Single] and [u Live mode] AF Operation Focusing will take longer than with [Quick mode]. Even when focus is achieved, pressing the shutter button halfway will focus again. You cannot focus on a moving subject continuously. The image brightness may change during and after the AF operation. If the light source changes while the Live View image is displayed, the screen may flicker and focusing may be difficult.
Using AF to Focus (AF Method) Shooting Conditions that Make Focusing Difficult Low-contrast subjects such as the blue sky, solid-color flat surfaces or when highlight or shadow details are lost. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). Fine lines and subject outlines. Under a light source whose brightness, color, or pattern keeps changing.
Using AF to Focus (AF Method) If focus is not achieved with the shooting conditions on the preceding page, set the lens’s focus mode switch to and focus manually. If you use AF with any of the following lenses, using [Quick mode] is recommended. Autofocusing with [FlexiZone - Single] or [u Live mode] may take longer or correct focus may not be achieved. EF50mm f/1.4 USM, EF50mm f/1.8 II, EF50mm f/2.5 Compact Macro, EF100mm f/2.8 Macro USM, EF75-300mm f/4-5.6 III, EF75-300mm f/4-5.
Using AF to Focus (AF Method) Quick Mode: f The dedicated AF sensor is used to focus in One-Shot AF (p.97), using the same AF method as with viewfinder shooting. Although you can focus on the target subject quickly, the Live View image will be interrupted momentarily during the AF operation. You can use nine AF points to focus (automatic selection). You can also select one AF point to focus and focus only on the area covered by that AF point (manual selection). AF point 1 Display the Live View image.
Using AF to Focus (AF Method) on the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. (No picture is taken.) When focus is achieved, the AF point that achieved focus will turn green and the Live View image will reappear. If focus is not achieved, the AF point will turn orange and blink. the picture.
MF: Focusing Manually You can magnify the image and focus precisely with manual focus. 1 Set the lens’s focus mode switch to . Turn the lens focusing ring to focus roughly. the magnifying frame. 2 Move Press the cross keys to move Magnifying frame the magnifying frame to the position where you want to focus. Press <0> to return the magnifying frame to the center. (If C.Fn-9 is set, hold down the button and press <0>.) the image. 3 Magnify Press the button.
General Live View Shooting Cautions Image Quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image. If Live View shooting is used continuously for a prolonged period, the camera’s internal temperature may rise, and image quality may deteriorate. Always exit Live View shooting when you are not shooting.
General Live View Shooting Cautions Live View Image Under low- or bright-light conditions, the Live View image may not reflect the brightness of the captured image. Even if a low ISO speed is set, noise may be noticeable in the displayed Live View image under low light. However, when you shoot, the image recorded will have less noise. (The image quality of the Live View image is different from that of the recorded image.
6 Shooting Movies Movie shooting is enabled by setting the Mode Dial to . The movie recording format will be MOV. For cards that can record movies, see page 5. Full HD 1080 Full HD 1080 indicates compatibility with HighDefinition featuring 1080 vertical pixels (scanning lines).
k Shooting Movies Connecting the camera to a TV set is recommended to play back the movies shot (p.226). Autoexposure Shooting 1 Set the Mode Dial to . The reflex mirror will make a sound, then the image will appear on the LCD monitor. on the subject. 2 Focus Before shooting a movie, focus with AF or manual focus (p.148-156). When you press the shutter button halfway, the camera will focus with the current AF method. the movie.
k Shooting Movies General Movie Shooting Cautions are on pages 181-182. If necessary, also read General Live View Shooting Cautions on pages 157-158. The ISO speed (ISO 100 - ISO 6400), shutter speed, and aperture are set automatically. You can press the button (p.120) to lock the exposure (AE lock). The exposure setting will be displayed for the number of seconds set with [k2: Metering timer]. After applying AE lock during movie shooting, you can cancel it by pressing the button.
k Shooting Movies Manual Exposure Shooting You can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. 1 Set the Mode Dial to . The reflex mirror will make a sound, then the image will appear on the LCD monitor. [Movie exposure]. 2 Select Press the button and under the [k1] tab, select [Movie exposure], then press <0>. [Manual]. 3 Select Select [Manual], then press <0>.
k Shooting Movies and shoot the movie. 6 Focus The procedure is the same as steps 2 and 3 for “Autoexposure Shooting” (p.160). ISO Speed During Manual Exposure Shooting With [Auto], the ISO speed will be set automatically within ISO 100 ISO 6400. You can set the ISO speed manually within ISO 100 - ISO 6400 in whole-stop increments. If [k1: k Highlight tone priority] is set to [Enable], the ISO speed will be ISO 200 - ISO 6400. AE lock and exposure compensation cannot be set.
k Shooting Movies Information Display Each time you press the button, the information display will change.
k Shooting Movies Notes for Movie Shooting Do not allow the product to maintain contact with the same area of skin for extended periods of time during use. This may result in low-temperature contact burns, including skin redness and blistering, even if the product does not feel hot. The use of a tripod or similar equipment is recommended when using the product in hot places and for people with circulation problems or less sensitive skin.
k Shooting Movies Movie-related settings are under the [k1], [k2], and [k3] tabs (p.176). A movie file is recorded each time you shoot a movie (p.169). The movie image’s field of view is approx. 100% (with movie recording size set to [A]). Monaural sound is recorded by the camera’s built-in microphone (p.160). With a fully-charged Battery Pack LP-E10, the total movie shooting time will be as follows: approx. 1 hr. 30 min. at room temperature (23°C/73°F), and approx. 1 hr. 25 min.
Shooting Function Settings Function settings particular to movie shooting are explained here. Q Quick Control If you press the button while the image is displayed on the LCD monitor, you can set any of the following: AF method, White balance, Picture Style, Auto Lighting Optimizer, Movie-recording size, and Video snapshot. Press the button (7). The settable functions will be displayed. If the AF method is , the AF point will also be displayed. You can also select the AF point (p.154).
3 Setting the Movie Recording Size The menu option [k2: Movie rec. size] enables you to select the movie’s image size [****x****] and frame rate [9] (frames recorded per second). The 9 (frame rate) switches automatically depending on the [k2: Video system] setting. Image Size [1920x1080] (A) : Full High-Definition (Full HD) recording quality. The aspect ratio is 16:9. [1280x720] (B) : High-Definition (HD) recording quality. The aspect ratio is 16:9. [640x480] (C) : Standard-definition recording quality.
3 Setting the Movie Recording Size Total Movie Recording Time and File Size Per Minute Movie recording Size Total Recording Time on Card (Approx.) File Size 4 GB 16 GB 64 GB 11 min. 44 min. 2 hr. 59 min. 340 MB/min. 11 min. 44 min. 2 hr. 59 min. 340 MB/min. 2 hr. 50 min. 11 hr. 20 min. 90 MB/min. 6 [1920x1080] 5 4 [1280x720] [640x480] 8 7 6 5 42 min.
3 Shooting Video Snapshots You can shoot a series of short movie clips lasting approx. 2 sec., 4 sec., or 8 sec. called video snapshots. The video snapshots can be joined together into a single movie called a video snapshot album. You can thereby show quick highlights of a trip or event. A video snapshot album can also be played back together with background music (p.174, 219).
3 Shooting Video Snapshots Creating a Video Snapshot Album the first video snapshot. 3 Shoot Press the < > button, then shoot. A Shooting duration The blue bar indicating the shooting duration will gradually decrease. After the set shooting duration elapses, the shooting stops automatically. The confirmation screen will appear (p.172). as a video snapshot album. 4 Save Select [J Save as album], then press <0>. The movie clip will be saved as the video snapshot album’s first video snapshot.
3 Shooting Video Snapshots Options in Steps 4 and 5 Function J Save as album (Step 4) J Add to album (Step 5) Description The movie clip will be saved as the video snapshot album’s first video snapshot. The video snapshot just recorded will be added to the album recorded immediately before. A new video snapshot album is created and the W Save as a new album movie clip is saved as the first video snapshot. Select (Step 5) [OK] on the confirmation dialog.
3 Shooting Video Snapshots Cautions for Shooting Video Snapshots You can add to an album only video snapshots with the same duration (approx. 2 sec., 4 sec., or 8 sec. each). Note that if you do any of the following while shooting video snapshots, a new album will be created for subsequent video snapshots. • Changing the [Movie rec. size] (p.168). • Changing the [Video snapshot]’s shooting time (p.170). • Changing the [Sound rec.
3 Shooting Video Snapshots Playing back an Album You can play back a video snapshot album in the same way as a normal movie (p.218). 1 Play back the movie. Press the button to display an image. the album. 2 Select In the single-image display, the [ts] icon displayed on the upper left of the screen indicates a video snapshot album. Press the keys to select a video snapshot album, then press <0>. back the album.
3 Shooting Video Snapshots Background Music You can play background music when you play back albums, normal movies, and slide shows on the camera (p.174, 219). To play background music, you must first copy the background music to the card using EOS Utility (EOS software). For information on how to copy the background music, refer to the EOS Utility Instruction Manual. Music recorded on the memory card must be used only for private enjoyment. Do not violate the rights of the copyright holder.
3 Menu Function Settings Menu options under the [k1], [k2], and [k3] tabs are explained below. [k1] Movie exposure Normally, set this to [Auto]. Setting it to [Manual] will enable you to manually set the ISO speed, shutter speed, and aperture for movie shooting (p.162). AF method The AF methods are the same as described on pages 148-155. You can select [FlexiZone - Single], [u Live mode], or [Quick mode]. Note that continuous focusing on a moving subject is not possible.
3 Menu Function Settings kShutter/AE lock button You can change the function assigned to the shutter button’s halfway position and to the AE lock button. • AF/AE lock: Normal function. Press the shutter button halfway to execute AF. Press the button for AE lock. • AE lock/AF: Press the shutter button halfway for AE lock. For AF, press the button. This is convenient when you want to focus and meter separately. • AF/AF lock, no AE lock: Press the shutter button halfway to execute AF.
3 Menu Function Settings [k2] Movie recording size You can set the movie recording size (image size and frame rate). For details, see page 168. Sound recording Sound will be recorded by the built-in monaural microphone. An external microphone cannot be used. Level meter [Sound rec.] and [Rec. level] options [Auto] : The sound-recording level is adjusted automatically. Auto level control will operate automatically in response to the sound level. [Manual] : For advanced users.
3 Menu Function Settings [Wind filter] When set to [Enable], it reduces wind noise when there is wind outdoors. Note that [Enable] will also reduce low bass sounds, so set this function to [Disable] when there is no wind. It will record a more natural sound than with [Enable]. Sound is recorded at a sampling rate of 48 kHz/16-bit. Metering timer You can change how long the exposure setting is displayed (AE lock time). Grid display With [Grid 1l] or [Grid 2m], you can display grid lines.
3 Menu Function Settings [k3] Exposure compensation The exposure compensation amount can be set up to ±3 stops. Auto Lighting Optimizer The Auto Lighting Optimizer can be set as explained on page 123. If the [k1] menu tab’s [kHighlight tone priority] is set to [Enable], the Auto Lighting Optimizer will be set automatically to [Disable] and cannot be changed. Custom White Balance As explained on page 133, the image for custom white balance can be selected.
General Movie Shooting Cautions Red Internal Temperature Warning Icon If the camera’s internal temperature increases due to prolonged movie shooting or under a high ambient temperature, a red icon will appear. The red icon indicates that movie shooting will soon be terminated automatically. If this happens, you will not be able to shoot again until the camera’s internal temperature decreases. Turn off the power and let the camera rest for a while.
General Movie Shooting Cautions Recording and Image Quality If you use a card with a slow writing speed, a five-level indicator may appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory). The slower the card, the faster the indicator will climb upward. If the indicator becomes full, movie shooting will stop automatically.
7 Handy Features Disabling the Beeper (p.184) Card Reminder (p.184) Setting the Image Review Time (p.184) Setting the Auto Power-off Time (p.185) Adjusting the LCD Monitor Brightness (p.185) Creating and Selecting a Folder (p.186) File Numbering Methods (p.188) Setting Copyright Information (p.190) Auto Rotation of Vertical Images (p.192) Checking Camera Settings (p.193) Reverting the Camera to the Default Settings (p.194) Turning the LCD Monitor Off/On (p.
Handy Features 3 Disabling the Beeper You can prevent the beeper from sounding when focus is achieved or during self-timer operation. Under the [z1] tab, select [Beep], then press <0>. Select [Disable], then press <0>. 3 Card Reminder This setting prevents shooting if there is no card in the camera. Under the [z1] tab, select [Release shutter without card], then press <0>. Select [Disable], then press <0>.
Handy Features 3 Setting the Auto Power-off Time To save battery power, the camera turns off automatically after the set time of idle operation elapses. You can set this auto power-off time. When the camera is turned off due to auto power off, you can turn it on again by pressing the shutter button, etc. If [Disable] is set, either turn off the camera or press the button to turn off the LCD monitor to save battery power. Even when [Disable] is set, if the camera is not used for 30 min.
Handy Features 3 Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This operation is optional since a folder will be created automatically for saving captured images. Creating a Folder 1 Select [Select folder]. Under the [51] tab, select [Select folder], then press <0>. [Create folder]. 2 Select Select [Create folder], then press <0>. a new folder. 3 Create Select [OK], then press <0>.
Handy Features Selecting a Folder Lowest file number Number of images in folder With the folder selection screen displayed, select a folder and press <0>. The folder where the captured images will be saved is selected. Subsequent captured images will be recorded into the selected folder. Folder name Highest file number Folders As with “100CANON” for example, the folder name starts with three digits (the folder number) followed by five alphanumeric characters.
Handy Features 3 File Numbering Methods The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number will appear on your computer in this format: IMG_0001.JPG. Under the [51] tab, select [File numbering], then press <0>. The available settings are described below. Select the option, then press <0>.
Handy Features [Auto reset]: The file numbering restarts from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders.
Handy Features 3 Setting Copyright InformationN When you set the copyright information, it will be appended to the image as Exif information. 1 Select [Copyright information]. Under the [53] tab, select [Copyright information], then press <0>. the option to be set. 2 Select Select [Enter author’s name] or [Enter copyright details], then press <0>. The text entry screen will appear. Select [Display copyright info.] to check the copyright information currently set.
Handy Features Text Entry Procedure Changing the entry area Press the button to toggle between the top and bottom entry areas. Moving the cursor Press the keys to move the cursor. Entering text In the bottom area, press the cross keys or turn the <6> dial to select a character, then press <0> to enter it. Deleting a character Press the button to delete one character.
Handy Features 3 Auto Rotation of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and on the computer instead of horizontally. You can change the setting for this feature. Under the [51] tab, select [Auto rotate], then press <0>. The available settings are described below. Select the desired setting, then press <0>.
Handy Features B Checking Camera Settings While the menu is displayed, press the button to display the camera’s major function settings. While the menu is displayed, press the button to display the settings. Press the button again to return to the menu. Settings display Remaining card capacity Color space (p.137) WB correction (p.135)/ WB bracketing (p.136) Live View shooting (p.139) Red-eye reduction (p.106) Auto rotate display (p.192) Date/Time (p.41) Daylight saving time (p.
Handy Features 3 Reverting the Camera to the Default SettingsN The camera’s shooting function settings and menu settings can be reverted to their defaults. This option is available in Creative Zone modes. 1 Select [Clear settings]. Under the [53] tab, select [Clear settings], then press <0>. [Clear all camera settings]. 2 Select Select [Clear all camera settings], then press <0>. [OK]. 3 Select Select [OK], then press <0>.
Handy Features Shooting Function Settings Image Recording Settings AF operation One-Shot AF Image quality 73 AF point selection Automatic selection Picture Style Auto u (Single shooting) Standard Drive/self-timer Auto Lighting Optimizer Metering mode q (Evaluative metering) Peripheral illumination correction Enable / Correction data retained ISO speed AUTO (Auto) Color space sRGB ISO Auto Maximum 3200 White balance Q (Ambience priority) Custom White Balance Canceled White balanc
Handy Features Camera Settings Live View Shooting Settings Auto power off 30 sec. Live View shooting Enable Beep Enable AF method FlexiZone - Single Release shutter without card Enable Image review 2 sec.
Handy Features 3 Turning the LCD Monitor Off/On You can set the camera so that the shooting function settings display (p.54) does not turn off and on as you press the shutter button halfway (or press the button). Under the [52] tab, select [LCD off/on btn], then press <0>. The available settings are described below. Select the option, then press <0>. [Shutter btn.]: When you press the shutter button halfway, the display will turn off. When you let go of the shutter button, the display will turn on.
3 Setting the FlashN The built-in flash and external Speedlite settings can be set with the camera’s menu. You can use the camera’s menu to set the external Speedlite function settings only if an EX-series Speedlite compatible with this function is attached. The setting procedure is the same as when setting a camera menu function. Select [Flash control]. Under the [z1] tab, select [Flash control], then press <0>. The flash control screen will appear. [Flash firing] Normally, set this to [Enable].
3 Setting the FlashN [Built-in flash func. setting] and [External flash func. setting] With [Built-in flash func. setting] and [External flash func. setting], you can set the functions in the table below. The functions displayed under [External flash func. setting] vary depending on the Speedlite model. Select [Built-in flash func. setting] or [External flash func. setting]. The flash functions will be displayed. The highlighted functions can be selected and set. [Built-in flash func.
3 Setting the FlashN Flash mode When using an external Speedlite, you can select the flash mode to suit your desired flash shooting. [E-TTL II] is the standard mode of EX-series Speedlites for automatic flash shooting. [Manual flash] enables you to set the flash output yourself. This is for advanced users. Regarding other flash modes, refer to the instruction manual of a Speedlite compatible with the functions.
3 Setting the FlashN Clear flash settings With the [External flash func. setting] screen, press the button to display the screen to clear the flash settings. When you select [OK], the settings for the built-in flash and external Speedlite will be cleared. Setting the External Speedlite Custom Functions The Custom Functions displayed under [External flash C.Fn setting] vary depending on the Speedlite model. 1 Display the Custom Function. Select [External flash C.Fn setting], then press <0>.
3 Appending Dust Delete DataN Dust entering the camera can adhere to the image sensor and cause dust spots to be visible on the captured images. To erase these dust spots, you can append the Dust Delete Data to the images. The Dust Delete Data is used by Digital Photo Professional (EOS software, p.314) to erase the dust spots automatically. Preparation Prepare a solid white object such as a sheet of paper. Set the lens focal length to 50 mm or longer.
3 Appending Dust Delete DataN a solid-white object. 3 Shoot At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. The picture will be taken in aperturepriority AE mode at an aperture of f/22. Since the image will not be saved, the data can still be obtained even if there is no card in the camera. When the picture is taken, the camera will start collecting the Dust Delete Data.
3 Manual Sensor CleaningN If dust adheres to the image sensor and dust spots appear on the images, you can clean the image sensor yourself with a commerciallyavailable camera blower. Before cleaning the sensor, detach the lens from the camera. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. 1 Select [Clean manually]. Under the [52] tab, select [Clean manually], then press <0>. [OK].
3 Manual Sensor CleaningN While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor may get damaged. • Setting the power switch to <2>. • Opening the card slot/battery compartment cover. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor.
8 Image Playback This chapter explains functions related to viewing photos and movies, with more advanced uses than in Chapter 2 “Basic Shooting and Image Playback”. Here you will find explanations of how to play back and erase photos and movies with the camera and view them on a TV set. Images shot and saved with another device The camera may not be able to properly display images captured with a different camera, edited with a computer, or that have had their file names changed.
x Searching for Images Quickly H Displaying Multiple Images on One Screen (Index Display) Search for images quickly with the index display showing four or nine images on one screen. 1 Play back the image. When you press the button, the last image captured will be displayed. to the index display. 2 Switch Press the button. The 4-image index display will appear. The selected image is highlighted with an orange frame. Press the button again to switch to the 9-image display.
x Searching for Images Quickly I Jumping through Images (Jump Display) In the single-image display, you can turn the <6> dial to jump through the images forward or backward according to the jump method set. 1 Select [Image jump w/6]. Under the [x2] tab, select [Image jump w/6], then press <0>. the jump method. 2 Select Press the cross keys to select the jump method, then press <0>.
u/y Magnified View You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor. 1 Magnify the image. Press the button during image playback. The image will be magnified. If you hold down the button, the image will be magnified until it reaches the maximum magnification. Press the button to reduce the magnification. If you hold down the button, the magnification will be reduced to the single-image display. Magnified area position the display area.
b Rotating the Image You can rotate the displayed image to the desired orientation. 1 Select [Rotate image]. Under the [x1] tab, select [Rotate image], then press <0>. an image. 2 Select Press the keys to select the image to be rotated. You can also select an image in the index display (p.208). the image. 3 Rotate Each time you press <0>, the image will rotate clockwise as follows: 90° 9 270° 9 0°. To rotate another image, repeat steps 2 and 3.
3 Setting Ratings You can rate images (still photos and movies) with one of five rating marks: l/m/n/o/p. This function is called rating. 1 Select [Rating]. Under the [x2] tab, select [Rating], then press <0>. an image. 2 Select Press the keys to select a still photo or movie to be rated. By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button. the image. 3 Rate Press the keys to select a rating.
3 Setting Ratings A total of up to 999 images of a given rating can be displayed. If there are more than 999 images with a given rating, [###] will be displayed. Taking Advantage of Ratings With [x2: Image jump w/6], you can display only images having the specified rating. With [x2: Slide show], you can play back only images having the specified rating.
Q Quick Control for Playback During playback, you can press the button to set any of the following: [J: Protect images], [b: Rotate image], [9: Rating], [U: Creative filters], [S: Resize (JPEG images only)], and [e: Image jump w/6]. For movies, only the functions in bold above can be set. 1 Press the button. During image playback, press the button. The Quick Control options will appear. a function and set it. 2 Select Press the keys to select a function.
Q Quick Control for Playback To rotate an image, set [51: Auto rotate] to [OnzD]. If [51: Auto rotate] is set to [OnD] or [Off], the [b Rotate image] setting will be recorded to the image, but the camera will not rotate the image for display. Pressing the button during the index display will switch to the single-image display and the Quick Control icons will appear. Pressing the button again will return to the index display.
k Enjoying Movies You can play back movies in the following three ways: Playback on a TV Set (p.226) An HDMI cable (sold separately) is necessary to connect the camera to a TV set. Also, an HDMI terminal on a TV set is required. When the camera is connected to a TV set with an HDMI cable, you can play back movies and still photos on the TV set.
k Enjoying Movies Playback on the Camera’s LCD Monitor (p.218-225) You can play back movies on the camera’s LCD monitor. You can also edit out the movie’s first and last scenes, and play back the still photos and movies on the card in an automatic slide show. A movie edited with a computer cannot be rewritten to the card or played back with the camera.
k Playing Back Movies 1 Play back the image. Press the button to display an image. a movie. 2 Select Press the keys to select a movie. In the single-image display, the <1s> icon displayed on the upper left of the screen indicates a movie. If the movie is a video snapshot, [ts] will be displayed. In the index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played back from the index display, press <0> to switch to the single-image display.
k Playing Back Movies Movie Playback Panel Operation Playback Description 2 Exit Returns to the single-image display. 7 Play Pressing <0> toggles between playback and stop. 8 Slow motion Adjust the slow motion speed by pressing the keys. The slow motion speed is indicated on the upper right of the screen. 5 First frame Displays the movie’s first frame. 3 Previous frame Each time you press <0>, the previous frame is displayed. If you hold down <0>, it will rewind the movie.
X Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. 1 On the movie playback screen, select [X]. The editing screen will be displayed. the part to be edited out. 2 Specify Select either [ ] (Cut beginning) or U [V] (Cut end), then press <0>. Press the keys to see the previous or next frames. Holding down the key will fast forward or fast rewind the frames. After deciding which part to edit out, press <0>.
X Editing a Movie’s First and Last Scenes the edited movie. 4 Save Select [ ], then press <0>. W The save screen will appear. To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite], then press <0>. On the confirmation dialog, select [OK], then press <0> to save the edited movie and return to the movie playback screen. Since the editing is performed in approx. 1-sec.
3 Slide Show (Auto Playback) You can play back the images on the card as an automatic slide show. 1 Number of images to be played back Select [Slide show]. Under the [x2] tab, select [Slide show], then press <0>. the images to be played 2 Select back. Press the keys to select the desired option, then press <0>. All images/Movies/Stills Press the keys to select one of the following: [jAll images] [kMovies] [zStills]. Then press <0>.
3 Slide Show (Auto Playback) Item Playback Description jAll images All the still photos and movies on the card will be played back. iDate Still photos and movies taken on the selected shooting date will be played back. nFolder Still photos and movies in the selected folder will be played back. kMovies Only the movies on the card will be played back. zStills Only the still photos on the card will be played back. 9Rating Still photos and movies with the selected rating will be played back.
3 Slide Show (Auto Playback) [Transition effect] [Background music] the slide show. 4 Start Press the keys to select [Start], then press <0>. After [Loading image...] is displayed, the slide show will start. the slide show. 5 Exit To exit the slide show and return to the setting screen, press the button. To pause the slide show, press <0>. During pause, [G] will be displayed on the upper left of the image. Press <0> again to resume the slide show.
3 Slide Show (Auto Playback) Selecting the Background Music If you copy a background music to the card using the EOS Utility (EOS software), you can play back the slide show while playing the background music. 1 Select [Background music]. Set [Background music] to [On], then press <0>. If the card has no background music, you cannot perform step 2. the background music. 2 Select Press the keys to select the desired background music, then press <0>.
Viewing Images on a TV Set You can play back still photos and movies on a TV set. An HDMI cable (sold separately) is necessary to connect the camera to a TV set. Also, an HDMI terminal on a TV set is required. If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected to a TV set. Set [Wi-Fi/NFC] to [Disable], then reconnect the camera to the TV set with an HDMI cable. 1 Connect the HDMI cable to the camera.
Viewing Images on a TV Set the button. 5 Press The image will appear on the TV screen. (Nothing will be displayed on the camera’s LCD monitor.) The images will automatically be displayed at the optimum resolution of the TV set. By pressing the button, you can change the display format. To play back movies, see page 218. Adjust movie sound volume with the TV set. The sound volume cannot be adjusted with the camera.
K Protecting Images You can set protections to prevent the precious images from being erased accidentally. 3 Protecting a Single Image 1 Select [Protect images]. Under the [x1] tab, select [Protect images], then press <0>. The protect setting screen will appear. [Select images]. 2 Select Select [Select images], then press <0>. An image will be displayed. Image protect icon the image. 3 Protect Press the keys to select 228 the image to be protected, then press <0>.
K Protecting Images 3 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at one time. When you select [All images in folder] or [All images on card] in [x1: Protect images], all the images in the folder or on the card will be protected. To cancel the image protection, select [Unprotect all images in folder] or [Unprotect all images on card]. If you format the card (p.52), the protected images will also be erased. Movies can also be protected.
L Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images (p.228) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a 1+73 image will erase both the RAW and JPEG images. Erasing a Single Image 1 Play back the image to be erased. the button. 2 Press The Erase menu will appear.
L Erasing Images [Select and erase images]. 2 Select Select [Select and erase images], then press <0>. An image will be displayed. To display the three-image display, press the button. To return to the single-image display, press the button. the images to be erased. 3 Select Press the keys to select the image to be erased, then press the keys. A checkmark [X] will be displayed on the upper left of the screen. To select another image to be erased, repeat step 3.
B Shooting Information Display Sample Still Photo Taken in a Creative Zone Mode Exposure compensation amount Protect images Flash exposure compensation amount Rating Folder number - File number Aperture Histogram (Brightness/RGB) Shutter speed Picture Style/Settings Metering mode Shooting mode ISO speed Highlight tone priority White balance Image-recording quality Playback number/ Total images recorded Eye-Fi transfer Color space Shooting date and time White balance correction File size * With 1
B Shooting Information Display Sample Still Photo Taken in a Basic Zone Mode Ambience and ambience effects Shooting mode Lighting or scene * With images taken in a Basic Zone mode, the information displayed will differ depending on the shooting mode.
B Shooting Information Display Highlight Alert When the shooting information is displayed, any overexposed areas of the image will blink. To obtain more image detail in the overexposed, blinking areas, set the exposure compensation to a negative amount and shoot again. Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. The display can be switched with [x2: Histogram disp].
9 Post-Processing Images After taking a picture, you can apply a Creative filter or resize the JPEG image (reduce the number of pixels). The camera may not be able to process images taken with another camera. Post-processing images as described in this chapter is not possible while the camera is connected to a computer via the interface cable.
U Applying Creative Filters You can apply the following Creative filters to an image and save it as a new image: Grainy B/W, Soft focus, Fish-eye effect, Toy camera effect, and Miniature effect. 1 Select [Creative filters]. Under the [x1] tab, select [Creative filters], then press <0>. An image will be displayed. an image. 2 Select Select the image you want to apply a filter to. By pressing the button, you can switch to the index display and select an image. a filter.
U Applying Creative Filters the image. 5 Save Select [OK] to save the image. Check the destination folder and image file number, then select [OK]. To apply a filter to another image, repeat steps 2 to 5. To return to the menu, press the button. When shooting 1+73 or 1 image, the filter effect will be applied to the 1 image and the image will be saved as a JPEG image.
U Applying Creative Filters Creative Filter Characteristics V Grainy B/W Creates a grainy black-and-white photo. You can change the blackand-white effect by adjusting the contrast. W Soft focus Gives the image a soft look. You can change the degree of softness by adjusting the blur. X Fish-eye effect Gives the effect of a fish-eye lens. The image will have a barrel-type distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
S Resizing JPEG Images You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3/4/a/ b images. JPEG c and RAW images cannot be resized. 1 Select [Resize]. Under the [x1] tab, select [Resize], then press <0>. An image will be displayed. an image. 2 Select Select the image you want to resize. By pressing the button, you can switch to the index display and select an image. the desired image size.
S Resizing JPEG Images Resize Options by Original Image Size Available Resize Settings Original Image Size 4 a b c 3 k k k k k k k k k 4 a k b c Image Sizes The image sizes displayed in step 3 on the preceding page, such as [***M ****x****], have a 3:2 aspect ratio. The image sizes by aspect ratios are shown in the table below. Image Quality Aspect Ratio and Pixel Count (Approx.) 3:2 4:3 16:9 1:1 4 3984x2656 3552x2664 3984x2240* 2656x2656 (10.6 megapixels) (9.5 megapixels) (8.
10 Printing Images Printing (p.242) You can connect the camera directly to a printer and print out the images on the card. The camera is compliant with “wPictBridge”, which is the standard for direct printing. You can also use a wireless LAN to send images to a PictBridge (Wireless LAN) printer and print them. For details, refer to the Wireless Function Instruction Manual. Digital Print Order Format (DPOF) (p.
Preparing to Print The direct printing procedure can be performed entirely with the camera while looking at the setting screens on camera’s LCD monitor. Connecting the Camera to a Printer 1 Set the camera’s power switch to <2>. up the printer. 2 Set For details, refer to the printer’s instruction manual. the camera to the 3 Connect printer. Connect them with an interface cable (sold separately).
Preparing to Print back the image. 6 Play Press the button. The image will appear with the icon on the upper left of the screen to indicate that the camera is connected to a printer. Before using the printer, make sure it has a PictBridge connection port. Movies cannot be printed. The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. If there is a long beeping sound in step 5, it indicates a problem with the printer.
w Printing The screen display and setting options will differ depending on the printer. Some settings may not be available. For details, refer to the printer’s instruction manual. Printer-connected icon 1 Select the image to be printed. Check that the icon is displayed on the upper left of the LCD monitor. Press the keys to select the image to be printed. <0>. 2 Press The print setting screen will appear. Print setting screen Sets the printing effects (p.246).
w Printing QSetting the Paper Size Select the size of the paper loaded in the printer, then press <0>. The paper type screen will appear. YSetting the Paper Type Select the type of the paper loaded in the printer, then press <0>. The page layout screen will appear. USetting the Page Layout Select the page layout, then press <0>. The print setting screen will reappear. Bordered Prints with white borders along the edges. Borderless Prints with no borders.
w Printing the printing effects (image 4 Set optimization). Set them if necessary. If you do not need to set any printing effects, go to step 5. Contents displayed on the screen vary depending on the printer. Select the option, then press <0>. Select the desired printing effect, then press <0>. If the icon is displayed brightly next to , you can also adjust the printing effect (p.248). Printing Effect Description EOn Prints with the printer’s standard colors.
w Printing the date and file number 5 Set imprinting. Set them if necessary. Select , then press <0>. Set the print settings as desired, then press <0>. the number of copies. 6 Set Set it if necessary. Select , then press <0>. Set the number of copies, then press <0>. printing. 7 Start Select [Print], then press <0>. The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer.
w Printing e Adjusting Printing Effects In step 4 on page 246, select the printing effect. When the icon is displayed brightly next to , you can press the button to adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4. Brightness The image brightness can be adjusted. Adjust levels When you select [Manual], you can change the histogram’s distribution and adjust the image’s brightness and contrast.
w Printing Cropping the Image Tilt correction You can crop the image and print only an enlarged version of the cropped portion, as if the image is recomposed. Set the cropping right before printing. If you change the print settings after setting the cropping, you may have to set the cropping again before printing. 1 On the print setting screen, select [Cropping]. 2 Set the cropping frame size, position, and aspect ratio. The image area within the cropping frame will be printed.
w Printing Depending on the printer, the cropped image area may not be printed as you specified. The smaller you make the cropping frame, the grainier the picture will look in the print. Check the camera’s LCD monitor while cropping the image. If you look at the image on a TV screen, the cropping frame may not be displayed accurately. Handling Printer Errors If printing does not resume after you resolve a printer error (no ink, no paper, etc.
W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file number imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options 1 Select [Print order]. Under the [x1] tab, select [Print order], then press <0>. [Set up]. 2 Select Select [Set up], then press <0>. the option as desired. 3 Set Set the [Print type], [Date], and [File No.].
W Digital Print Order Format (DPOF) Print type Date File number K Standard Prints one image on one sheet. L Index Multiple thumbnail images are printed on one sheet. K Both L Prints both the standard and index prints. On Off On Off [On] imprints the recorded date on the print. [On] imprints the file number on the print. the setting. 4 ExitPress the <7> button. The print order screen will reappear. Next, select [Sel.Image], [Byn], or [All images] to order the images to be printed.
W Digital Print Order Format (DPOF) Print Ordering Selecting images Select and order images one by one. To display the three-image display, press the button. To return to the single-image display, press the button. Press the button to save the print order to the card. Quantity Total images selected Checkmark Index icon [Standard] [Both] Press the keys to set the number of copies to be printed for the displayed image.
W Direct Printing of Print-Ordered Images With a PictBridge printer, you can easily print images with DPOF. 1 Prepare to print. See page 242. Follow the “Connecting the Camera to a Printer” procedure up to step 5. 2 Under the [x1] tab, select [Print order]. 3 Select [Print]. [Print] will be displayed only if the camera is connected to a printer and printing is possible. 4 Set the [Paper settings] (p.244). Set the printing effects (p.246) if necessary. 5 Select [OK].
p Specifying Images for a Photobook You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to transfer images to a computer, the specified images will be copied into a dedicated folder. This function is useful for ordering photobooks online and for printing photobooks on a printer. Specifying One Image at a Time 1 Select [Photobook Set-up]. Under the [x1] tab, select [Photobook Set-up], then press <0>. [Select images].
p Specifying Images for a Photobook Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at once. When [x1: Photobook Set-up] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be specified. To cancel the image specification, select [Clear all in folder] or [Clear all on card]. RAW images and movies cannot be specified.
11 Customizing the Camera e on Creat i ve Z You can make fine adjustments to various camera functions to suit your picture-taking preferences with Custom Functions. Custom Functions can be set and used only in Creative Zone modes.
3 Setting Custom FunctionsN 1 Custom Function number Select [Custom Functions (C.Fn)]. Under the [53] tab, select [Custom Functions (C.Fn)], then press <0>. the Custom Function 2 Select number. Press the keys to select the Custom Function number, then press <0>. the setting as desired. 3 Change Press the keys to select the desired setting (number), then press <0>. Repeat steps 2 and 3 if you want to set other Custom Functions.
3 Setting Custom FunctionsN Custom Functions C.Fn I: Exposure ALV Shooting 1 Exposure level increments 2 ISO expansion 3 Flash synchronization speed in Av mode p.261 p.260 k k k C.Fn II: Image 4 Long exposure noise reduction 5 High ISO speed noise reduction 6 Highlight tone priority p.262 p.263 k k k C.Fn III: Autofocus/Drive 7 AF-assist beam firing p.
3 Custom Function SettingsN Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn IV: Operation/Others. C.Fn I: Exposure C.Fn-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. This is effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.
3 Custom Function SettingsN C.Fn-3 Flash Synchronization Speed in Av Mode You can set the flash sync speed for flash photography in the aperture-priority AE mode. 0: Auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the scene’s brightness. With an external Speedlite, high-speed sync will also be possible. 1: 1/200-1/60 sec. auto Prevents a slow shutter speed from being set in low-light conditions.
3 Custom Function SettingsN C.Fn II: Image C.Fn-4 Long Exposure Noise Reduction 0: Off 1: Auto For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases. 2: On Noise reduction is performed for all exposures of 1 sec. or longer. The [2: On] setting may reduce noise that cannot be detected with the [1: Auto] setting.
3 Custom Function SettingsN C.Fn-5 High ISO speed noise reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. At low ISO speeds, the noise in the darker parts of the image (shadow areas) is further reduced. Change the setting to suit the noise level. 0: Standard 2: Strong 1: Low 3: Disable With setting 2, the maximum burst during continuous shooting will greatly decrease.
3 Custom Function SettingsN C.Fn III: Autofocus/Drive C.Fn-7 AF-assist beam firing Enables or disables the built-in flash’s AF-assist beam or the EOSdedicated external Speedlite’s AF-assist beam. 0: Enable The AF-assist beam will be emitted when necessary. 1: Disable The AF-assist beam will not be emitted. This prevents the AFassist beam from disturbing others. 2: Enable external flash only If an external Speedlite is attached, it will emit the AF-assist beam when necessary.
3 Custom Function SettingsN C.Fn IV: Operation/Others C.Fn-8 Shutter/AE lock button 0: AF/AE lock 1: AE lock/AF This is convenient when you want to focus and meter separately. Press the button to autofocus, and press the shutter button halfway to apply AE lock. 2: AF/AF lock, no AE lock During AI Servo AF, you can press the button to pause the AF operation momentarily. This prevents the AF from being thrown off by any obstacle passing between the camera and subject.
3 Custom Function SettingsN C.Fn-9 Assign SET button You can assign a frequently-used function to <0>. When the camera is ready to shoot, pressing the <0> button will display the respective function setting screen. 0: Normal (disabled) 1: Image quality The image quality setting screen will appear. Select the desired image-recording quality, then press <0>. 2: Flash exposure compensation The flash exposure compensation setting screen will appear. Set the adjustment amount, then press <0>.
3 Registering My MenuN Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. 1 Select [My Menu settings]. Under the [9] tab, select [My Menu settings], then press <0>. [Register to My Menu]. 2 Select Select [Register to My Menu], then press <0>. the desired items. 3 Register Select the item, then press <0>. On the confirmation dialog, select [OK] and press <0> to register the item. You can register up to six items.
12 Reference This chapter provides reference information for camera features, system accessories, etc. Certification Logo Under the [53] tab, if you select [Certification Logo Display] and press <0>, some of the logos of the camera’s certifications will appear. Other certification logos can be found in this Instruction Manual, on the camera body, and on the camera’s package.
Using a Household Power Outlet You can power the camera with a household power outlet by using the DC Coupler DR-E10 and Compact Power Adapter CA-PS700 (both sold separately). 1 Connect the DC coupler. Connect the DC cord’s plug to the DC coupler. the DC coupler. 2 Insert Open the cover and insert the DC coupler until it locks in place. in the DC cord. 3 Push Open the DC cord hole cover and install the cord as shown in the illustration. Close the cover. the power cord.
F Using a Remote Switch Remote Switch RS-60E3 (sold separately) comes with an approx. 60 cm/ 2.0 ft cord. When connected to the camera’s remote control terminal, it can be pressed halfway and completely, just like the shutter button. Remote Controller RC-6, RC-1, and RC-5 (all sold separately) cannot be used with this camera.
External Speedlites EOS-dedicated, EX-series Speedlites Easy basic operation, like using a built-in flash. When an EX-series Speedlite (sold separately) is attached to the camera, almost all the autoflash control is done by the camera. In other words, it is like a high-output flash attached externally in place of the built-in flash. For detailed instructions, refer to the EX-series Speedlite’s instruction manual. This camera is a Type-A camera. Canon Speedlites other than the EX-series will not fire.
H Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card manufacturer.
H Using Eye-Fi Cards the [Access point SSID:]. 5 Check Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the button three times to exit the menu. the picture. 6 Take The picture is transferred and the icon switches from gray (not connected) to one of the icons below. For transferred images, O is displayed in the shooting information Transmission status icon display (p.232).
H Using Eye-Fi Cards Cautions for Using Eye-Fi Cards If [53:Wi-Fi/NFC] is set to [Enable], image transfer with an Eye-Fi card is not possible. If “J” is displayed, an error occurred while retrieving the card information. Turn the camera power off and on again. Even if [51: Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In hospitals, airports, and other places where wireless transmissions are prohibited, remove the Eye-Fi card from the camera in advance.
Function Availability Table by Shooting Mode o: Set automatically k: User selectable Mode Dial All image quality settings selectable Automatically set/ Auto ISO speed Manually set Picture Style Lighting/scene-based shots Blurring/sharpening the background Color tone Auto White balance A7C 2 3 4 5 Creative Zone P 6 d sf a o o o o o o o o o k k k k k k k k k k*1 k k k k o o k k k k k k k k k k k k k k k k k k k k k k k Q Q Q Q Q Q Q Qw Q k k k k k k k k k k k k k k k Preset Custom Correction/ Bracke
Function Availability Table by Shooting Mode Mode Dial AF Metering mode Exposure Basic Zone k k k k AF-assist beam o o o *3 o *4 o o k k k k Evaluative metering o o o o o o o o o k k k k AF point selection Metering mode selection k k k k Program shift k Exposure compensation k k k AEB AE lock Depth-of-field preview Single shooting Drive/ self-timer Continuous shooting j (10 sec.) Automatic firing Flash on (Fires at all times) External flash k k k k k k k k k k k k k l (2 sec.
System Map ST-E2 ST-E3-RT Magnifier MG-Ef Eyepiece Extender EP-EX15II 430EX III-RT/ 600EX II-RT 430EX III 270EX II Macro Ring Lite MR-14EX II Macro Twin Lite MT-26EX-RT Bundled Accessories Eyecup Ef Rubber Frame Ef Strap E-series Dioptric Adjustment Lenses Angle Finder C Semi Hard Case EH26-L/EH27-L Battery Pack LP-E10 Battery Charger LC-E10 or LC-E10E DC Coupler DR-E10*1 Compact Power Adapter CA-PS700*1 Protecting Cloth PC-E1/PC-E2 Hand Strap E2 278
System Map GPS Receiver GP-E2*2 Remote Switch RS-60E3 Timer Remote Controller TC-80N3 EF lenses EF-S lenses Remote Controller Adapter RA-E3 HDMI Cable HTC-100 (2.9 m/9.5 ft.) TV set/Monitor Connect Station CS100 Interface Cable IFC-400PCU (1.3 m/4.3 ft.) PictBridge-compatible printer Interface Cable IFC-200U/500U (1.9 m/6.2 ft.) / (4.7 m/15.4 ft.) USB port SD/SDHC/SDXC memory card Card reader Computer Card slot *1: AC Adapter Kit ACK-E10 can also be used.
3 Menu Settings Viewfinder Shooting and Live View Shooting J Shooting 1 (Red) Page Image quality 73 / 83 / 74 / 84 / 7a / 8a / b / c / 1+73 / 1 88 Beep Enable / Disable 184 Release shutter without card Enable / Disable 184 Image review Off / 2 sec. / 4 sec. / 8 sec. / Hold 184 Peripheral illumination Enable / Disable correction 124 Red-eye reduction Disable / Enable 106 Flash control Flash firing / Built-in flash function setting / External flash function setting / External flash C.
3 Menu Settings L Shooting 3 (Red) Page Dust Delete Data Obtains data to be used to erase dust spots 202 ISO Auto Max.:400 / Max.:800 / Max.:1600 / Max.:3200 / Max.:6400 94 Live View shooting Enable / Disable 141 AF method FlexiZone - Single / uLive mode / Quick mode 148 Grid display Off / Grid 1l / Grid 2m 145 Aspect ratio 3:2 / 4:3 / 16:9 / 1:1 146 Metering timer 4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / 30 min.
3 Menu Settings 2 Playback 2 (Blue) Page Histogram display Brightness / RGB 234 Image jump w/6 1 image / 10 images / 100 images / Date / Folder / Movies / Stills / Rating 209 Slide show Playback description / Display time / Repeat / Transition effect / Background music 222 Rating [OFF] / l / m / n / o / p 212 30 sec. / 1 min. / 2 min. / 4 min. / 8 min. / 15 min.
3 Menu Settings 7 Set-up 3 (Yellow) Page Disable / Enable Wi-Fi/NFC Allow NFC connections Transfer images between cameras / Wi-Fi function Connect to smartphone / Print from Wi-Fi printer / Upload to Web service Certification Logo Displays some of the logos of the camera’s Display certifications Custom Functions (C.
3 Menu Settings k Movie Shooting a Movie 1 (Red) Page Movie exposure Auto / Manual 176 AF method FlexiZone - Single / uLive mode / Quick mode 176 AF with shutter button Disable / Enable during movie recording 176 kShutter button/ AE lock button AF/AE lock / AE lock/AF / AF/AF lock, no AE lock / AE/AF, no AE lock 177 kHighlight tone priority Disable / Enable 177 1920x1080 (6/5/4) / 1280x720 (8/7) / 640x480 (6/5) 168 c Movie 2 (Red) Movie recording size Sound recording: Auto / Manual / Dis
3 Menu Settings d Movie 3 (Red) Page Exposure compensation 1/3-stop increments, ±3 stops 180 Auto Lighting Optimizer Disable / Low / Standard / High 180 Custom White Balance Manual setting of white balance 180 Picture Style DAuto / PStandard / QPortrait / RLandscape / SNeutral / UFaithful / VMonochrome / WUser Def. 1-3 180 Menus for Movie Shooting Mode The [k1], [k2], and [k3] tabs appear only in the movie shooting mode. The [z2], [z3], [z4], and [9] tabs do not appear.
Troubleshooting Guide If a problem occurs with the camera, first consult this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery does not recharge. Do not use any battery other than a genuine Canon Battery Pack LP-E10. The battery charger’s lamp blinks. If the battery charger has a problem, the protection circuit will stop the charging and the charge lamp will blink in orange.
Troubleshooting Guide The battery becomes exhausted quickly. Use a fully-charged battery (p.34). The rechargeable battery performance will degrade over repeated use. Purchase a new one. The number of possible shots will decrease with any of the following operations: • • • • • Pressing the shutter button halfway for a prolonged period. Activating the AF frequently without taking a picture. Using the lens’s Image Stabilizer. Using the LCD monitor frequently.
Troubleshooting Guide No images can be shot or recorded. Make sure the card is properly inserted (p.36). Slide the card’s write-protect switch to the write/erase position (p.36). If the card is full, replace the card or delete unnecessary images to make space (p.36, 230). If you try to focus in the One-Shot AF mode and the focus indicator in the viewfinder blinks, a picture cannot be taken. Press the shutter button halfway again to refocus automatically, or focus manually (p.47, 101).
Troubleshooting Guide Horizontal stripes appear, or the exposure or color tone look strange. Horizontal stripes (noise) or irregular exposures can be caused by fluorescent lighting, LED lighting, or other light sources during viewfinder or Live View shooting. Also, the exposure or color tone may not come out right. A slow shutter speed may solve the problem. The standard exposure cannot be obtained or the exposure is irregular.
Troubleshooting Guide ISO 100 cannot be set. Under [53: Custom Functions (C.Fn)], if [6: Highlight tone priority] is set to [1: Enable], ISO 100 cannot be set. If [0: Disable] is set, ISO 100 can be set (p.263). This also applies to movie shooting (p.177). ISO speed [H] (equivalent to ISO 12800) cannot be set. Under [53: Custom Functions (C.
Troubleshooting Guide When I use the mode with flash, the shutter speed becomes slow. If you shoot at night when the background is dark, the shutter speed automatically becomes slow (slow-sync shooting) so that both the subject and background are properly exposed. To prevent a slow shutter speed, under [53: Custom Functions (C.Fn)], set [3: Flash sync. speed in Av mode] to [1: 1/200-1/60sec. auto] or [2: 1/200sec. (fixed)] (p.261). The built-in flash rises by itself.
Troubleshooting Guide High-speed sync cannot be set in the mode. Under [53: Custom Functions (C.Fn)], set [3: Flash sync. speed in Av mode] to [0: Auto] (p.261). The camera makes a noise when it is shaken. A small noise may be heard when the camera’s internal mechanism moves slightly. This is not a malfunction. The shutter makes two shooting sounds during Live View shooting. If you use flash, the shutter will make two sounds each time you shoot (p.141).
Troubleshooting Guide The ISO speed cannot be set for movie shooting. If [k1: Movie exposure] is set to [Auto], the ISO speed will be set automatically. If [Manual] is set, you can set the ISO speed manually (p.162). The exposure changes during movie shooting. If you change the shutter speed or aperture during movie shooting, the changes in the exposure may be recorded. Shooting a few test movies is recommended where you will perform zooming during movie shooting.
Troubleshooting Guide Display Problems The menu screen shows fewer tabs and options. In Basic Zone modes and in movie shooting mode, certain tabs and menu options are not displayed. Set the shooting mode to a Creative Zone mode (p.50). The file name’s first character is an underscore (“_”). Set the color space to sRGB. If Adobe RGB is set, the first character will be an underscore (p.137). The file name starts with “MVI_”. It is a movie file (p.189). The file numbering does not start from 0001.
Troubleshooting Guide The LCD monitor does not display a clear image. If the LCD monitor is dirty, use a soft cloth to clean it. In low or high temperatures, the LCD monitor display may seem slow or may look black. It will return to normal at room temperature. [Eye-Fi settings] does not appear. [Eye-Fi settings] will appear only when an Eye-Fi card is inserted in the camera.
Troubleshooting Guide The movie has still moments. During autoexposure movie shooting, if there is a drastic change in the exposure level, the recording will stop momentarily until the brightness stabilizes. In such cases, shoot movies with manual exposure (p.162). I cannot connect the camera to my TV set. An HDMI cable (sold separately) is necessary to connect the camera to a TV set. Using the HDMI Cable HTC-100 (sold separately) is recommended (p.226).
Troubleshooting Guide Printing-Related Problems I cannot connect the camera to my printer. If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected to a printer with an interface cable. Set [Wi-Fi/NFC] to [Disable], then reconnect the camera to a printer with an interface cable. There are fewer printing effects than listed in the instruction manual. Contents displayed on the screen vary depending on the printer. This instruction manual lists all the printing effects available (p.246).
Error Codes Error number If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Cause and countermeasures Number 01 02 Error Message and Solution Communications between the camera and lens is faulty. Clean the lens contacts. Clean the electrical contacts on the camera and lens, use a Canon lens, or remove and install the battery again (p.25, 26, 36). Card cannot be accessed. Reinsert/change card or format card with camera.
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash SD memory card, SDHC memory card, SDXC memory card Approx. 22.3 x 14.9 mm Canon EF lenses (including EF-S lenses) * Excluding EF-M lenses (35mm-equivalent angle of view is that of a lens with approx. 1.6x the focal length indicated.) Canon EF mount • Image Sensor Type: Effective pixels: Aspect ratio: Dust delete feature: CMOS sensor Approx. 24.
Specifications Noise reduction: Automatic image brightness correction: Highlight tone priority: Lens peripheral illumination correction: Applicable to long exposures and high ISO speed shots Auto Lighting Optimizer provided Provided Provided • Viewfinder Type: Eye-level pentamirror Field of view coverage: Vertical/Horizontal approx. 95% (with eyepoint approx. 21 mm) Magnification: Approx. 0.8x (-1 m-1 with 50mm lens at infinity) Eyepoint: Approx.
Specifications ISO speed (Recommended exposure index): Exposure compensation: AE lock: Basic Zone modes*: ISO 100 - ISO 3200 set automatically * Portrait: ISO 100 Creative Zone modes: ISO 100 - ISO 6400 set manually (whole-stop increments), ISO 100 - ISO 6400 set automatically, maximum ISO speed settable for ISO Auto, or ISO expansion to “H” (equivalent to ISO 12800) Manual: ±5 stops in 1/3- or 1/2-stop increments AEB: ±2 stops in 1/3- or 1/2-stop increments (can be combined with manual exposure compensa
Specifications • Live View Shooting Aspect ratio: Focus method: 3:2, 4:3, 16:9, 1:1 Contrast detection (FlexiZone-Single, Face detection Live mode), Phase-difference detection (Quick mode) Manual focus (approx.
Specifications • LCD Monitor Type: Monitor size and dots: Brightness adjustment: Interface languages: Feature guide: TFT color liquid-crystal monitor Approx. 7.5 cm (3.0 in.) (4:3) with approx. 920,000 dots Manual (7 levels) 25 Displayable • Playback Image display format: Zoom magnification: Highlight alert: Image browsing method: Image rotation: Ratings: Movie playback: Image protection: Slide show: Background music: Basic info, basic info + image quality/playback number, shooting info.
Specifications • Interface Digital terminal: Hi-Speed USB equivalent: Computer communication, Direct printing, GPS Receiver GP-E2, Connect Station CS100 connection Type C (Auto switching of resolution) HDMI mini OUT terminal: Remote control terminal:For Remote Switch RS-60E3 Eye-Fi card: Compatible • Power Battery: Battery Pack LP-E10 (Quantity 1) * AC power can be supplied via household power outlet accessories. With viewfinder shooting: Number of possible Approx.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Third party software This product includes third party software. expat.
Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc. caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Digital Camera Model DS126741 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. For CA, USA only Included lithium battery contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
13 Software Start Guide / Downloading Images to a Computer This chapter explains the following: Overview of the software for EOS DIGITAL cameras How to download and install the software on a computer How to download and view the Software Instruction Manuals (PDF files) How to download images from the camera to a computer 313
Software Start Guide Software Overview This section explains an overview of various software applications for EOS DIGITAL cameras. Internet connection is required to download and install the software. Download and installation are not possible in environments with no Internet connection. EOS Utility With the camera connected to a computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer.
Software Start Guide Downloading and Installing the Software Do not connect the camera to your computer before you install the software. Otherwise, the software will not be installed properly. Even if a previous version of the software is installed on your computer, follow the procedure below to install the latest version. (The previous version will be overwritten.) 1 Download the software. Connect to the Internet from a computer and access the following Canon Web site. www.canon.
Downloading and Viewing the Software Instruction Manuals (PDF Files) Internet connection is required to download the Software Instruction Manuals (PDF files). Download is not possible in environments with no Internet connection. 1 Download the Software Instruction Manuals (PDF files). Connect to the Internet and access the following Canon Web site. www.canon.com/icpd Select your country or region of residence and download the Instruction Manuals. 2 View the Software Instruction Manuals (PDF files).
Downloading Images to a Computer You can use the EOS software to download the images in the camera to a computer. There are two ways to do this. Downloading by Connecting the Camera to the Computer 1 Install the software (p.315). an interface cable (sold 2 Use separately) to connect the camera to the computer. Connect the cable to the camera’s digital terminal with the cable plug’s icon facing the front of the camera. Connect the cord’s plug to the computer’s USB terminal.
Downloading Images to a Computer Downloading Images with a Card Reader You can also use a card reader to download images to a computer. Install the software (p.315). 1 the card into the card 2 Insert reader. Digital Photo Professional to 3 Use download the images. Refer to the Digital Photo Professional Instruction Manual. When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Index Numerics 10- or 2-sec. self-timer ..................103 1280x720 (movie) .........................168 1920x1080 (movie) .......................168 640x480 (movie) ...........................168 9-point AF auto selection ................99 A A (Scene Intelligent Auto) ............58 Access lamp....................................38 Accessories.......................................3 Adobe RGB...................................137 AE lock..........................................
Index Color temperature.........................131 Color tone ...............................71, 127 Continuous file numbering ............188 Continuous shooting .....................102 Contrast ........................................127 Copyright information....................190 Creative Auto ..................................64 Creative filters...............................236 M (Creative Zone) icon....................8 Creative Zone modes .....................30 Custom Functions..................
Index AF-assist beam.................100, 264 Beeper ......................................184 Difficult subjects for AF .....101, 152 Manual focusing ...............101, 156 Out of focus ................46, 101, 152 Recomposing..............................61 Focusing point (AF point)................99 Folder creation/selection...............186 Food................................................71 Formatting (card initialization).........52 Frame rate ....................................
Index Lens ................................................44 Lock release ...............................45 Peripheral illumination correction..................................124 Lighting/scene-based shots ............80 Live View shooting..................62, 139 Aspect ratio ..............................146 Face detection Live mode (AF) ..........................................149 FlexiZone - Single ....................148 Grid display ..............................145 Information display ...........
Index O ONE SHOT (One-Shot AF).............97 P P (Program AE)...............................86 PAL .......................................168, 284 Paper settings (printing)................244 Partial metering.............................115 Peripheral illumination correction ...124 Photobook set-up..........................255 PictBridge......................................241 Picture Style....................95, 126, 129 Pixel count ......................................88 Playback ....................
Index 2 (Portrait) ................................67 3 (Landscape) .........................68 4 (Close-up) .............................69 5 (Sports).................................70 P (Food) ....................................71 6 (Night Portrait) .......................72 Shutter button .................................47 Shutter synchronization (1st/2nd curtain)............................200 Shutter-priority AE ........................108 Single shooting .............................
The descriptions in this Instruction Manual are current as of December 2017. For information on the compatibility with any products introduced after this date, contact any Canon Service Center. For the latest version Instruction Manual, refer to the Canon Web site. CPH-E507-000 © CANON INC.
