User Manual
Table Of Contents
- Cover
- Introduction
- Getting Started
- Charging the Battery
- Installing and Removing the Battery and Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Operation
- Quick Control for Shooting Functions
- Menu Operations
- Formatting the Card
- Switching the LCD Monitor Display
- Feature Guide
- Basic Shooting and Image Playback
- Fully Automatic Shooting (Scene Intelligent Auto)
- Full Auto Techniques (Scene Intelligent Auto)
- Disabling Flash
- Creative Auto Shooting
- Shooting Portraits
- Shooting Landscapes
- Shooting Close-ups
- Shooting Moving Subjects
- Shooting Food
- Shooting Night Portraits
- Quick Control
- Shooting with Ambience Selection
- Shooting by Lighting or Scene Type
- Image Playback
- Creative Shooting
- Advanced Shooting
- Conveying the Subject’s Movement
- Changing the Depth of Field
- Manual Exposure
- Changing the Metering Mode
- Setting Exposure Compensation
- Auto Exposure Bracketing
- Locking the Exposure
- Locking the Flash Exposure
- Auto Correction of Brightness and Contrast
- Correcting the Image’s Dark Corners
- Customizing Image Characteristics
- Registering Preferred Image Characteristics
- Matching the Light Source
- Adjusting the Color Tone for the Light Source
- Setting the Color Reproduction Range
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Handy Features
- Image Playback
- Post-Processing Images
- Printing Images
- Customizing the Camera
- Reference
- Software Start Guide / Downloading Images to a Computer
Troubleshooting Guide
296
During autoexposure movie shooting, if there is a drastic change in the
exposure level, the recording will stop momentarily until the brightness
stabilizes. In such cases, shoot movies with manual exposure (p.162).
An HDMI cable (sold separately) is necessary to connect the camera
to a TV set. Using the HDMI Cable HTC-100 (sold separately) is
recommended (p.226).
Also check that your TV set has an HDMI IN terminal. If the TV set
does not have an HDMI IN terminal and has only an A/V IN jack, the
camera cannot be connected.
Check that the HDMI cable’s plug is inserted all the way in (p.226).
If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected
to a TV set. Set [Wi-Fi/NFC] to [Disable], then reconnect the camera
to the TV set with an HDMI cable.
Depending on the card reader and computer OS used, SDXC cards
may not be correctly recognized. In such a case, connect your camera
to the computer with the interface cable, then transfer the images to
your computer using EOS Utility (EOS software, p.314).
JPEG c and RAW images cannot be resized with the camera
(p.239).
The movie has still moments.
I cannot connect the camera to my TV set.
No picture on the TV set.
My card reader does not recognize the card.
I cannot resize the image.