User guide

54
Reviewing an Image Right after Shooting
Right after a shot is taken, the image appears in the LCD monitor for 2
seconds. In addition, the images will keep on displaying regardless of the
review duration setting if one of the following operations is performed.
• Keeping the shutter button pressed after a shot.
• Pressing the SET button while the image is displayed on the LCD monitor.
Press the shutter button halfway to stop displaying it so that you can shoot the
next frame.
• You can do the following while the image is displayed.
- Display the image’s detailed information (p. 34).
- Erase the image (p. 105).
- Magnify the image in the display (When pressing the SET button
while the image is displayed) (p. 90).
Changing the Review Duration
The default review time is 2 seconds. The review function can be set to [Off] or
changed to any time in the range of 2 to 10 seconds in one-second increments.
1
In the (Rec.) menu, select .
See Selecting Menus and Settings (p. 43).
2
Use the or button to select
review setting and press the MENU
button.
• With the [Off] option, the image will not
automatically display.
• In the [2 sec.] to [10 sec.] range, the
image will continue to display for the
specified time even if the shutter button is
released.
• Holding the shutter button down after a
shot holds the image in the display
regardless of the setting.