Owner's Manual

Table Of Contents
195
3 Setting the FlashN
Flash exposure compensation
The same setting as “Flash exposure
compensation” on page 188 can be set.
For details, refer to the Speedlite’s
instruction manual.
Flash exposure bracketing
While the flash output is changed
automatically, three shots are taken.
For details on FEB (Flash Exposure
Bracketing), refer to the Speedlite’s
instruction manual.
When using second-curtain synchronization, set the shutter speed to 1/25
sec. or slower. If the shutter speed is 1/30 sec. or faster, first-curtain
synchronization will be applied even if [Second-curtain synchronization]
is set.
By selecting [Clear flash settings], you can revert the flash settings to
their defaults.
With an EX-series Speedlite not compatible with flash function settings,
you can only set the following: [Flash firing], [E-TTL II meter.], and
[Flash exposure compensation] under [Flash function settings].
([Shutter synchronization] can also be set with certain EX-series
Speedlites.)
If flash exposure compensation is set with the Speedlite, you cannot set
the flash exposure compensation on the camera (with the <m>
button or flash function settings). If it is set with both the camera and
Speedlite, the Speedlite’s setting overrides the camera’s.