Owner's Manual

Table Of Contents
70
You can select the AF mode to suit the shooting conditions or subject.
In the <A> mode, “AI Focus AF” is set automatically.
1
On the lens, set the focus mode
switch to <AF>.
2
Press the <o> button. (9)
3
Select the AF mode.
While looking at the LCD panel, turn
the <6> dial.
X: One-Shot AF
9: AI Focus AF
Z: AI Servo AF
Suited for still subjects. When you press the shutter button
halfway, the camera will focus only once.
When focus is achieved, the AF point that achieved focus will be
displayed, and the focus confirmation light <o> in the viewfinder will
also light up.
With evaluative metering, the exposure setting will be set at the
same time focus is achieved.
While you hold down the shutter button halfway, the focus will be
locked. You can then recompose the shot if desired.
f: Selecting the AF ModeN
One-Shot AF for Still Subjects
In the d/s/f/a/F shooting modes, AF is also possible by pressing
the <p> button.