Camera Flash User Manual

Setting the Flash Output for Each Slave
With manual flash and multiple Speedlites, you can set a different flash
output for each slave unit.
All settings are done with the master unit.
(l!i)Zoom 2Ymm
1/:
K) IBIII EmmI
"Z.11
Press the <MODE> button so
that
<M> is displayed.
M
Press the <ZOOM/~> button
so that
<-;1·'1(.-> blinks.
Select the flash ratio.
Turn the <@ >dial to select <A: B>
or <A: B: C>, then press the <@>
button.
Set the flash output.
Press the <@> button.
The slave
10 <8> will blink.
Turn the
< @ > dial to set the flash
output for
< 8 >, then press the < @ >
button.
The slave
10 <~> will blink. Turn the
< @ > dial to set the flash output for
< ~ >, then press the < @ > button.
The slave
10 <~> will blink. Turn the
< @ > dial to set the flash output for
<~>, then press the <@> button.
All the slave IDs will light.
45