Owner's Manual
Table Of Contents
- Getting Started
- Table of Contents
- Memory Card Compatibility
- About Electronic Manual and Software
- Supplied Accessories
- Parts & Controls
- Adjusting Screen Angle and Orientation
- Basic Guide
- Auto Mode / Hybrid Auto Mode
- Shooting (Smart Auto)
- Shooting in Hybrid Auto Mode
- Digest Movie Playback
- Still Images / Movies
- Still Images
- Movies
- Scene Icons
- Continuous Shooting Scenes
- Image Stabilization Icons
- On-Screen Frames
- Zooming in Closer on Subjects (Digital Zoom)
- Shooting at Preset Focal Lengths (Step Zoom)
- Self-Timer
- Shooting by Touching the Screen (Touch Shutter)
- Continuous Shooting
- Image Display During Playback
- Aspect Ratio
- Image Resolution
- Movie Image Quality
- Changing Features Available in Auto / Hybrid Auto Mode
- Other Shooting Modes
- Playback Mode
- Wi-Fi Functions
- Index
- Camera User Guide
- Warranty
129
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
Before Use
Basic Guide
Advanced Guide
6
Choose a smartphone to connect to.
z Choose the smartphone (either by
pressing the [ ][ ] buttons or by turning
the [ ] dial), and then press the [ ]
button.
z After a connection is established with
the smartphone, the smartphone name
is displayed on the camera. (This screen
will close in about one minute.)
7
Import images.
z Use the smartphone to import images
from the camera to the smartphone.
z Use the smartphone to end the
connection; the camera will automatically
turn off.
● When using NFC, keep the following points in mind.
- Avoid strong impact between the camera and smartphone. This
may damage the devices.
- Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
together in slightly different positions.
- Do not place other objects between the camera and
smartphone. Also, note that camera or smartphone covers or
similar accessories may block communication.
3
Choose [ ].
z Press the [ ][ ] buttons or turn the [ ]
dial to choose [ ], and then press the [ ]
button.
z The camera’s SSID is displayed.
4
Connect the smartphone to the
network.
z In the smartphone’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
5
Start CameraWindow.
z For an NFC-compatible Android
smartphone (OS version 4.0 or later),
activating NFC and touching the
smartphone against the camera’s N-Mark
( ) will start CameraWindow on the
smartphone.
z For other smartphones, start
CameraWindow on the smartphone.
z After the camera recognizes the
smartphone, a device selection screen is
displayed.