Owner's Manual
Table Of Contents
- Getting Started
- Table of Contents
- Memory Card Compatibility
- About Electronic Manual and Software
- Supplied Accessories
- Parts & Controls
- Adjusting Screen Angle and Orientation
- Basic Guide
- Auto Mode / Hybrid Auto Mode
- Shooting (Smart Auto)
- Shooting in Hybrid Auto Mode
- Digest Movie Playback
- Still Images / Movies
- Still Images
- Movies
- Scene Icons
- Continuous Shooting Scenes
- Image Stabilization Icons
- On-Screen Frames
- Zooming in Closer on Subjects (Digital Zoom)
- Shooting at Preset Focal Lengths (Step Zoom)
- Self-Timer
- Shooting by Touching the Screen (Touch Shutter)
- Continuous Shooting
- Image Display During Playback
- Aspect Ratio
- Image Resolution
- Movie Image Quality
- Changing Features Available in Auto / Hybrid Auto Mode
- Other Shooting Modes
- Playback Mode
- Wi-Fi Functions
- Index
- Camera User Guide
- Warranty
153
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto
Power Down and Display Off, respectively) as needed (
=
27).
z Choose [Power Saving], and then press
the [
] button.
z After choosing an item, press the [
][ ]
buttons to adjust it as needed.
● To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
● The [Display Off] setting is applied even if you set [Auto Power
Down] to [Off].
● These power-saving functions are not available when you have
set Eco mode (
=
153) to [On].
Screen Brightness
Adjust screen brightness as follows.
z Choose [LCD Brightness], and then
press the [
][ ] buttons to adjust the
brightness.
● For maximum brightness, press and hold the [ ] button for at
least one second when the shooting screen is displayed or when in
single-image display. (This will override the [LCD Brightness] setting
on the [
] tab.) To restore the original brightness, press and hold
the [
] button again for at least one second or restart the camera.
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press
the [ ] button in Shooting mode (
=
26). To have the lens retracted
immediately after you press the [ ] button, set the retraction timing to
[0 sec.].
z Choose [Lens Retraction], and then
choose [0 sec.].
Using Eco Mode
This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce
battery consumption.
1
Congure the setting.
z Choose [Eco Mode], and then choose
[On].
z [
] is now shown on the shooting
screen (
=
179).
z The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
2
Shoot.
z To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.