Owner's Manual

a. Shooting with Camera-Determined Settings
24
Shooting Movies
1) Start shooting.
• Press the movie button. The camera
beeps once as recording begins, and
[eRec] is displayed with the elapsed
time.
• Black bars are displayed on the top and
bottom edges
of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
• Frames displayed around any detected
faces indicate that they are
in focus.
• Once recording begins, take your finger
off the movie button.
2) Resize the subject and recompose
the shot as needed.
'* To resize the subject, repeat the
operations
in step 3 ([JJ22).
However, note that the sound
of camera
operations will be recorded. Note that
movies shot at zoom factors shown
in
blue will look grainy.
• When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
3) Finish shooting.
• Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
• Recording will stop automatically when
the memory card becomes full.
The flash firing during shots indicates that the camera has
automatically attempted to ensure optimal colors
in the main
subject and background (Multi-area White Balance).