Owner's Manual

Shooting with Camera-Determined Settings ~
Still Images
([) A blinking lfl1 icon warns that images are more likely to be
blurred by camera shake. In this case, mount the camera on a
tripod
or take other measures to keep it still.
If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see the electronic manual.
,,~ The subject may be too close if the camera only beeps once
when you press the shutter button halfway. For details on the
focusing range (shooting range), see the electronic manual.
To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
,~ A blinking [ ~] icon displayed when you attempt to shoot
indicates that shooting is not possible until the flash has finished
recharging. Shooting can resume as soon as the flash is ready,
so either press the shutter button all the way down and wait,
or
release it and press it again.
,~ The shutter sound will not be played when the Sleeping and
Babies (Sleeping) icons (QJ29) are displayed.
I
'"' Although you can shoot again before the shooting screen
is displayed, your previous shot may determine the focus,
brightness, and colors used.
You can change how long images are displayed after shots (see
the electronic manual).
27