Owner's Manual
Table Of Contents
- Getting Started
- Table of Contents
- Memory Card Compatibility
- About Electronic Manual and Software
- Supplied Accessories
- Parts & Controls
- Adjusting Screen Angle and Orientation
- Basic Guide
- Auto Mode / Hybrid Auto Mode
- Shooting (Smart Auto)
- Shooting in Hybrid Auto Mode
- Digest Movie Playback
- Still Images / Movies
- Still Images
- Movies
- Scene Icons
- Continuous Shooting Scenes
- Image Stabilization Icons
- On-Screen Frames
- Zooming in Closer on Subjects (Digital Zoom)
- Shooting at Preset Focal Lengths (Step Zoom)
- Self-Timer
- Shooting by Touching the Screen (Touch Shutter)
- Continuous Shooting
- Image Display During Playback
- Aspect Ratio
- Image Resolution
- Movie Image Quality
- Changing Features Available in Auto / Hybrid Auto Mode
- Other Shooting Modes
- Playback Mode
- Wi-Fi Functions
- Index
- Camera User Guide
- Warranty
Specific
Shutter
Speeds and
Aperture
Values ([M] Mode)
......
Still
Images
Follow
these steps before shooting to set your preferred shutter speed
and aperture value to obtain the desired exposure.
For details on available shutter speeds and aperture values, see the
electronic manual.
84
1
Enter
lM1
mode.
• Set the mode dial to
[M].
2 Configure the setting.
• Turn the
[•]
dial to set the shutter speed
(1
),
and turn the
[()] ring to set the
aperture value (2).
( 1) (2)
(3)----,
Shutter
Speed (Sec.)
Available ISO Speed
(see the electronic manual)
250-40
[125]
30-
1.3
[125]
-
[3200]
1 -
1/2000
[125]-
[12800]
CD
• After you set the shutter speed or aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
o
Screen brightness may change depending on your specified
shutter speed
or
aperture value. However, screen brightness
remains the same when the flash is up and the mode is set to [
~].
• Images
shot at high
ISO speeds may look grainy.