User manual

Starting and Exiting CaptureOnTouch

###HOME > Chapter 6 Scanning with CaptureOnTouch > Starting and

Exiting CaptureOnTouch###

By default, CaptureOnTouch becomes resident in the system when

you start your computer.

Double-click (CaptureOnTouch icon) in the taskbar to start

CaptureOnTouch and display the main window.

z You can also start CaptureOnTouch from the Start menu. Click

[Start] - [All Programs] - [Canon DR-C225] - [DR-C225

CaptureOnTouch].

z The interval between the time you press the Start button on the

scanner and the time scanning begins is shortened when the

[Make CaptureOnTouch resident] check box is selected in the

[Basic settings] tab of the [Environmental settings] dialog box.

For details, see "Environmental Settings" on p.57.

Click (CaptureOnTouch icon) in the menu bar and then click [Launch

CaptureOnTouch] from the menu which appears to start CaptureOnTouch

and display the main window.

z The interval between the time you press the Start button on the

scanner and the time scanning begins is shortened when the

[Make CaptureOnTouch resident] check box is selected in the

[Basic settings] tab of the [Environmental settings] dialog box.

For details, see "Environmental Settings" on p.57.

Exiting CaptureOnTouch

To close the CaptureOnTouch window, click at the top of the window.

This closes the window, but CaptureOnTouch will continue to reside in the

system.

To quit the CaptureOnTouch application, click (CaptureOnTouch icon)

in the taskbar, and select [Exit] from the menu.

CaptureOnTouch becomes no longer resident in the system and the icon

disappears from the taskbar.