EF200mm f/2L IS USM C Y P O ENG Instruction
Thank you for purchasing a Canon product. Dedicated to EOS cameras, the EF200mm f/2L IS USM is a high-performance telephoto lens equipped with an Image Stabilizer. • "IS" stands for Image Stabilizer. • "USM" stands for Ultrasonic Motor. Features 1. The Image Stabilizer gives the equivalent effect of a shutter speed five stops faster*. The lens also has a second image stabilizer mode that is optimized for following shots of moving subjects. 2.
a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. • Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. This is to prevent the lens from concentrating the sun’s rays, which could cause a fire. • Do not stand on the lens case. Falling off the case could result in injury.
Nomenclature Focusing ring (→ 5) Distance scale (→ 6) Orientation locking knob (→ 14) Hood mount (→ 7) Lens mount index (→ 4) Drop-in filter (→ 12) Playback ring (→ 8) Rubber ring (→ 4) AF stop button (→ 7) C Y P O Contacts (→ 4) Focus mode switch (→ 5) Image stabilizer mode selector switch (→ 9) Focusing distance range selection switch (→ 5) Image stabilizer switch (→ 9) Focus preset button (→ 8) Focus preset switch (→ 8) Strap mount (→ 4) Tripod mount (→ 14) For detailed information, referenc
1. Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. • After detaching the lens, place the lens with the rear end up to prevent the lens surface and electrical contacts from getting scratched. • If the contacts get soiled, scratched, or have fingerprints on them, corrosion or faulty connections can result. The camera and lens may not operate properly. • If the contacts get soiled or have fingerprints on them, clean them with a soft cloth.
2. Setting the Focus Mode 3. Switching the Focusing Distance Range To shoot in autofocus (AF) mode, set the focus mode switch to AF. To use only manual focusing (MF), set the focus mode switch to MF, and focus by turning the focusing ring. The focusing ring always works, regardless of the focus mode. C Y P O You can set the focusing distance range to 1.9 m/6.2 ft. to infinity or 3.5 m/11.5 ft. to infinity. By setting the suitable focusing distance range, the actual autofocusing time can be shorter.
4. Infinity Compensation Mark 5. Depth-of-Field Scale Infinity compensation mark Distance index To compensate for shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mark is aligned with the distance indicator on the distance scale. C For accurate manual focusing on subjects at infinity distance, look through the viewfinder while rotating the focusing ring.
6. AF Stop Button • The AF stop function also works in AI Servo AF mode. • By setting the camera's Custom Function, you can change the AF stop button's function. For details, see the camera's instruction manual. 7. Hood During autofocus operation, you can press the AF stop button to temporarily pause autofocus. If the shutter button is still pressed halfway when the AF stop button is released, autofocusing will continue as before.
8. Focus Preset By presetting any focusing distance, you can instantly focus at that point even while you are shooting a different subject. This function operates in both the AF and MF modes. How to Focus at the Preset Distance While turning the playback ring to the left or right, press the shutter button completely. • The lens will focus at the preset distance. • If the focus preset switch was set to , the beeper will sound twice. C How to Set Set the focus preset switch to or .
9. Image Stabilizer Settings You can use the image stabilizer in AF or MF mode. Set the STABILIZER switch to . • If you are not going to use the image stabilizer function, set the switch to . Y P O Select the stabilizer mode. • MODE 1: Corrects vibrations in all directions. It is mainly effective for shooting still subjects.
10. Tips on Using the Image Stabilizer The image stabilizer in this lens is effective for hand-held shots under the following conditions. ● MODE 1 ● MODE 2 C • In semi-darkened areas such as indoors or outdoors at night. • In locations where flash photography is prohibited, such as art museums and theater stages. • In situations where your footing is uncertain. • In situations where fast shutter settings cannot be used. Y P O • When panning subjects in motion.
Tips on Using the Image Stabilizer • The Image Stabilizer cannot compensate for a blurred shot caused by a subject that moved. • Set the STABILIZER switch to when you are taking pictures using the Bulb setting (long exposures). If the STABILIZER switch is set to , the image stabilizer function may introduce errors. • The Image Stabilizer might not be fully effective in the following cases: • You shoot while riding on a bumpy road. • You move the camera dramatically for a panning shot in Mode 1.
11. Drop-In Filters The lens comes with the drop-in Gelatin Filter Holder 52 holding a glass filter. The holder accepts commercially-available gelatin filters. Using a Gelatin Filter 14mm 14mm 47mm Removing and Installing C To remove the drop-in filter, press in the left and right lock buttons and pull the filter holder straight up out of the slot. To install the drop-in filter, push the filter holder straight down into the slot until it clicks into place.
12. Extenders (Sold separately) With Extender EF1.4X ll or EF2X ll attached, the lens specifications will change as follows: Item With EF1.4X ll Extender Focal length (mm) Aperture Angle of view With EF2X ll Extender 280 400 f/2.8 – 45 f/4 – 64 Diagonal 8°50’ 6°10’ Vertical 4°55’ 3°30’ Horizontal 7°20’ 5°10’ 0.18 0.24 Maximum magnification (×) Y P O • First attach the Extender to the lens, then attach the lens to the camera. Detach it from the camera in the reverse order.
13. Extension Tubes (Sold separately) 15. Case You can attach Extension Tube EF12 II or EF25 II for magnified shots. The shooting distance and magnification are shown below. EF12 II EF25 II Camera-to-Subject Distance (mm) Near Far 1380 3397 1092 1716 Lid Magnification Near 0.19× 0.26× Far 0.06× 0.14× Manual focusing is recommended for accurate focusing. C 14.
Specifications Focal Length/Aperture Lens Construction Minimum Aperture Angle of View Min. Focusing Distance Max. Magnification Field of View Filter Max. Diameter and Length Weight Hood Lens Cap Case 200 mm f/2 12 groups, 17 elements f/32 Diagonal: 12° Vertical: 7° Horizontal: 10° 1.9 m/6.2 ft. 0.12 × approx. 97 × 145 mm/3.8 × 5.7 inch (at 1.9 m) Drop-in 52-series 128 × 208 mm/5.0 × 8.2 inch 2520 g/88.9 oz.
C CT1-7580-003 Y P O © CANON INC. 2008 2009.
