EF70-200mm f/2.
Thank you for purchasing a Canon product. Dedicated to EOS cameras, the Canon EF70200mm f/2.8L IS II USM lens is a highperformance telephoto zoom lens equipped with an Image Stabilizer. • “IS” stands for Image Stabilizer. • “USM” stands for Ultrasonic Motor. C Conventions used in this instruction Warning to prevent lens or camera malfunction or damage. Features 1. The Image Stabilizer gives the equivalent effect of a shutter speed four stops faster*. 2.
a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. • Do not point the lens or camera at the sun or photograph it. This is because the lens concentrates the sun’s rays even when the sun is outside the image area or when shooting with backlight, which could cause malfunction or fire.
Nomenclature Focusing distance range selection switch (→ 5) Distance scale (→ 11) Hood mount (→ 7) Zoom ring (→ 6) Filter mounting thread (→ 13) C Y P O Rubber ring (→ 4) Contacts (→ 4) Focusing ring (→ 5) Lens mount index (→ 4) Focus mode switch (→ 5) Image stabilizer switch (→ 8) Image stabilizer mode selector switch (→ 8) Tripod mount (→ 12) Orientation lock knob (→ 12) For detailed information, reference page numbers are provided in parentheses (→ **).
1. Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. The lens mount has a rubber ring for enhanced water- and dust-resistance. The rubber ring may cause slight abrasions around the camera's lens mount, but this will not cause any problems. If the rubber ring becomes worn, it is replaceable by a Canon Service Center at cost.
2. Setting the Focus Mode 3. Switching the Focusing Distance Range Y P O To shoot in autofocus (AF) mode, set the focus mode switch to AF. To use only manual focusing (MF), set the focus mode switch to MF, and focus by turning the focusing ring. The focusing ring always works, regardless of the focus mode. C You can set the focusing distance range to 1.2 m/3.9 ft. to infinity or 2.5 m/8.2 ft. to infinity. By setting the suitable focusing distance range, the actual autofocusing time can be shorter.
4. Zooming To zoom, turn the zoom ring. Be sure to finish zooming before focusing. Zooming after focusing can affect the focus.
5. Hood The ET-87 hood can keep unwanted light out of the lens, and also protects the front of the lens from rain, snow, and dust. Attaching C Y P O To attach the hood, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood as shown by the arrow until the lens' red dot is aligned with the hood's stop position mark.
6. Image Stabilizer Settings You can use the image stabilizer in AF or MF mode. Set the STABILIZER switch to . • If you are not going to use the image stabilizer function, set the switch to . Y P O Select the stabilizer mode. • MODE 1: Corrects vibrations in all directions. It is mainly effective for shooting still subjects.
7. Tips on Using the Image Stabilizer The image stabilizer in this lens is effective for hand-held shots under the following conditions. ● MODE 1 ● MODE 2 C Y P O • In semi-darkened areas such as indoors or outdoors at night. • In locations where flash photography is prohibited, such as art museums and theater stages. • In situations where your footing is uncertain. • In situations where fast shutter settings cannot be used. • When panning subjects in motion.
Tips on Using the Image Stabilizer • The Image Stabilizer cannot compensate for a blurred shot caused by a subject that moved. • Set the STABILIZER switch to when you are taking pictures using the Bulb setting (long exposures). If the STABILIZER switch is set to , the image stabilizer function may introduce errors. • The Image Stabilizer might not be fully effective in the following cases: • You shoot while riding on a bumpy road. • You move the camera dramatically for a panning shot in Mode 1.
8. Infinity Compensation Mark 9. Infrared Index Infinity compensation mark Distance index Y P O To compensate for shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mark is aligned with the distance indicator on the distance scale.
10. Using the Tripod Mount Adjusting the Revolving Mount You can loosen the orientation lock-knob on the tripod mount to allow it to rotate as needed to fit a particular camera model for switching between vertical and horizontal positions. Detaching First remove the lens from the camera and then remove the tripod mount from the lens as shown below. To attach the tripod mount, reverse the procedure. C Loosen the orientation locking knob.
11. Filters 13. Extension Tubes (Sold separately) You can attach filters to the filter mounting thread on the front of the lens. • If you need a polarizing filter, use the Canon Circular Polarizing Filter (77mm). • To adjust the polarizing filter, first remove the lens hood. (Sold separately) You can attach Extension Tube EF12 II or EF25 II for magnified shots. The shooting distance and magnification are shown below. Y P O EF12 ll 12.
14. Extenders (Sold separately) With Extender EF1.4X ll or EF2X ll attached, the lens specifications will change as follows: Item With EF1.4X ll Extender With EF2X ll Extender Focal length (mm) 98 – 280 140 – 400 Aperture f/4 – 45 f/5.6 – 64 25°20’ – 8°50’ 16°20’ – 6°10’ Diagonal Angle of view Vertical 13°50’ – 4°55’ Horizontal 20°50’ – 7°20’ 13°40’ – 5°10’ 0.30 0.
Specifications Focal Length & Max. Aperture 70 – 200 mm, f/2.8 Lens Construction 23 elements in 19 groups Min. Aperture f/32 Angle of View Diagonal: 34° – 12° Min. Focusing Distance 1.2 m / 3.9 ft. Max. Magnification & Field of view 0.21 × (at 200 mm), 308 × 463 – 115 × 171 mm / 12.1 × 18.2 – 4.5 × 6.7 inch (at 1.2 m) Filter Diameter 77 mm Max. Diameter & Length 88.8 × 199 mm / 3.5 × 7.8 inch Weight 1490 g / 52.6 oz.
C CT1-8561-003 0812Ni Y P O © CANON INC.
