C Y P O E The “Software Start Guide” and “Quick Reference Guide” are provided at end of this manual.
Introduction The EOS REBEL T3/1100D is a high-performance, digital single-lens reflex camera featuring a fine-detail CMOS sensor with approx. 12.2 effective megapixels, DIGIC 4, high-precision and high-speed 9-point AF, approx. 3 fps continuous shooting, Live View shooting, and HighDefinition (HD) movie shooting. The camera is highly responsive for shooting at anytime, provides many functions fitted for advanced shooting, and offers many other features.
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Battery Pack LP-E10 (with protective cover) Camera (with eyecup and body cap) Wide Strap EW-200D C Camera Instruction Manual (CD-ROM) Battery Charger LC-E10/LC-E10E* Y P O EOS DIGITAL Solution Disk (Software CD-ROM) Interface Cable Software Instruction Manual (CD-ROM) Camera Basic Instruction Manual * Battery Charger LC-E10 or LC-E10E is provided.
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. : Indicates the cross keys. <0> : Indicates the setting button. 0, 9, 7, 8 : Indicates that the respective function remains active for 4 sec., 6 sec., 10 sec., or 16 sec. respectively after you let go of the button. * In this manual, the icons and markings indicating the camera’s buttons, dials, and settings correspond to the icons and markings on the camera and on the LCD monitor.
Chapters For first-time DSLR users, Chapters 1 and 2 explain the camera’s basic operations and shooting procedures.
Contents at a Glance Shooting Shoot automatically Î p.49 - 62 (Basic Zone modes) Shoot continuously Î p.86 (i Continuous shooting) Take a picture of yourself in a group Î p.87 (j Self-timer) Freeze the action Blur the action Î p.92 (s Shutter-priority AE) Blur the background Î p.55 (C Creative Auto) Keep the background in sharp focus p.94 (f Aperture-priority AE) Y P O Adjust the image brightness (exposure) Î p.
Take many pictures Î p.74 (7a, 8a, b, c) Focusing Change the point of focus Î p.83 (S AF point selection) Shoot a moving subject Î p.61, 82 (AI Servo AF) Playback View the images with the camera Î p.70 (x Playback) Search for pictures quickly Î p.176 (H Index display) Y P O p.177 (I Image browsing) Rate images C Î p.180 (Ratings) Prevent important images from accidental deletion Î p.194 (K Image protect) Delete unnecessary images Î p.196 (L Delete) Auto play images and movies Î p.
Index to Features Power Image Quality Battery Image-recording quality Î p.74 • Charging • Installing/Removing • Battery check Î p.26 Î p.28 Î p.32 Picture Style Î p.79 White balance Î p.115 Color space Î p.119 Power outlet Î p.228 Image enhancement features Auto power off Î p.31 • Auto Lighting Optimizer • Lens peripheral illumination correction • Noise reduction for long exposures • Noise reduction for high ISO speeds • Highlight tone priority Card Inserting/Removing Î p.28 Format Î p.
Index to Features Playback Aperture-priority AE Î p.94 Manual exposure Î p.97 Image review time Î p.154 Bulb Î p.98 Single image display Î p.70 Automatic Depth-of-field AE Î p.99 • Shooting information display Î p.198 Metering mode Index display Î p.176 Image browsing (Jump display) Î p.177 Exposure compensation Î p.101 Magnify Î p.178 AEB Î p.103 Rotate Î p.179 AE lock Î p.105 Ratings Î p.180 Movie playback Î p.186 Editing out movie’s first/last scene Î p.
Contents Introduction 2 Item Check List.................................................................................................. 3 Conventions Used in this Manual ...................................................................... 4 Chapters ............................................................................................................ 5 Contents at a Glance......................................................................................... 6 Index to Features ...............
Contents Shoot by Ambience Selection ..........................................................................64 Shoot by Lighting or Scene Type .....................................................................67 x Image Playback..........................................................................................70 3 4 Creative Shooting Advanced Shooting Y P O 91 s: Action Shots .............................................................................................
Contents Shooting Function Settings ........................................................................... 126 z Menu Function Settings........................................................................... 127 Changing the Autofocus Mode ...................................................................... 128 MF: Focusing Manually ................................................................................. 135 6 7 Shooting Movies 139 k Shooting Movies...................................
Contents Slide Show (Auto Playback)...........................................................................189 Playback on a High-Definition TV ..................................................................191 K Protecting Images ....................................................................................194 L Erasing Images .........................................................................................196 B Shooting Information Display ..............................................
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Handling Precautions LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded. If the LCD monitor is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
Quick Start Guide 1 Insert the battery. (p.28) 2 Insert the card. (p.28) 3 4 5 16 To charge the battery, see page 26. With the card’s label facing toward the camera back, insert it into the slot. White index Red index Y P O Attach the lens. (p.35) C Align the lens’ white or red index with the camera’s index in the matching color. Set the lens focus mode switch to . (p.35) Set the power switch to <1>. (p.31) When the LCD monitor displays the Date/Time setting screen, see page 33.
Quick Start Guide 6 Set the Mode Dial to <1> (Full Auto). (p.50) 7 Focus the subject. (p.39) 8 9 All the necessary camera settings will be set automatically. Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus the subject. If necessary, the built-in flash will pop-up automatically. C Y P O Take the picture. (p.39) Press the shutter button completely to take the picture. Review the picture. (p.
Nomenclature The names in bold indicate the parts mentioned up until the “Basic Shooting and Image Playback” section. Built-in flash/AF-assist beam (p.88/84) Mode Dial (p.22) Power switch (p.31) EF Lens mount index (p.35) EF-S Lens mount index (p.35) Flash button (p.88) Flash-sync contacts Hot shoe (p.226) <6> Main Dial Focal plane mark (p.60) Shutter button (p.39) Strap mount (p.25) Red-eye reduction/ Self-timer lamp (p.89/87) Grip Mirror (p.173) C Y P O Terminal cover Contacts (p.
Nomenclature Aperture/Exposure compensation button/ Erase button (p.97/101/196) Display button (p.46,70,124,142,163) AE lock/ FE lock button/Index/ Reduce button (p.105/106/176/178,209) Dioptric adjustment knob (p.38) Eyecup (p.229) Viewfinder eyepiece LCD monitor (p.42,155) Live View shooting/ Movie shooting button (p.122/140) C AF point selection button/ Magnify button (p.83/178,209) Speaker (p.186) Y P O Quick Control button/ Direct print button (p.
Nomenclature Shooting Settings Display (in Creative Zone modes, p.22) c Main Dial pointer (p.91) Shutter speed Aperture Shooting mode Exposure level indicator Exposure compensation amount (p.101) AEB range (p.103) Auto Lighting Optimizer (p.107) ISO speed (p.77) Highlight tone priority (p.220) y Flash exposure compensation (p.102) 0 External flash exposure compensation Picture Style (p.79) AF mode (p.81) Raise built-in flash (p.
Nomenclature Viewfinder Information AF point activation indicator < > AF points Focusing screen ISO speed AE lock/ AEB in-progress Flash-ready Improper FE lock warning C Y P O <2> White balance correction Focus confirmation light Max.
Nomenclature Mode Dial The Mode Dial includes the Basic Zone modes, Creative Zone modes, and the Movie shooting mode. Creative Zone These modes give you more control for shooting various subjects. d : Program AE (p.72) s : Shutter-priority AE (p.92) f : Aperture-priority AE (p.94) a : Manual exposure (p.97) 8: Automatic depth-of-field AE (p.99) Basic Zone C Y P O All you do is press the shutter button. The camera sets everything to suit the subject. 1: Full Auto (p.50) 7: Flash Off (p.
Nomenclature Lens Lens without a distance scale Focus mode switch (p.35) Focusing ring (p.85,135) Zoom ring (p.36) Zoom position index (p.36) Hood mount (p.257) Filter thread (front of lens) (p.257) Y P O Image Stabilizer switch (p.37) Contacts (p.15) Lens mount index (p.
Nomenclature Battery Charger LC-E10 Charger for Battery Pack LP-E10 (p.26). Power plug Charge lamp Full-charge lamp Battery pack slot Battery Charger LC-E10E Charger for Battery Pack LP-E10 (p.26).
Getting Started Y P O This chapter explains preparatory steps before you start shooting and basic camera operations. C Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The eyepiece cover is also attached to the strap (p.229).
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. the battery. 2 Attach As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E10 the battery. 3 Recharge For LC-E10 Y P O As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Recharge the battery before using. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its power. After recharging the battery, detach it and unplug the charger from the power outlet. When not using the camera, remove the battery.
Installing and Removing the Battery and Card Load a fully-charged Battery Pack LP-E10 into the camera. The card (sold separately) can be an SD, SDHC, or SDXC memory card. The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing/erasing. Installing the Battery/Card 1 Open the cover. Slide the lever as shown by the arrows and open the cover. the battery. 2 Insert Insert the end with the battery Y P O contacts.
Installing and Removing the Battery and Card After opening the card/battery compartment cover, be careful not to push it back further. Otherwise, the hinge might break. The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [1 Release shutter without card] to [Disable] will prevent you from forgetting to insert a card (p.154). Removing the Battery/Card the power switch to <2>. 1 Set (p.31) the cover.
Installing and Removing the Battery and Card When the access lamp is lit or blinking, it indicates that images are being written to or read by the card, being erased, or data is being transferred. When the access lamp is lit or blinking, do not open the card/battery compartment cover and never do any of the following. Otherwise, the image data may be destroyed or the card or camera may be damaged. • Removing the card. • Removing the battery. • Shaking or banging the camera around.
Turning on the Power If the date/time setting screen appears when you turn on the power switch, see page 33 to set the date/time. <1> : The camera turns on. <2> : The camera turns off and does not operate. Set to this position when not using the camera. 3 About Auto Power Off To save battery power, the camera turns off automatically after about 30 seconds of non-operation. To turn on the camera again, just press the shutter button halfway (p.39).
Turning on the Power z Checking the Battery Level When the power switch is set to <1>, the battery level will be indicated in one of four levels: z : Battery level is OK. x : Battery level is less than half full. c : Battery will be exhausted soon. (Blinks) n : Battery must be recharged. Battery Life Y P O Temperature At 23°C / 73°F At 0°C / 32°F No Flash Approx. 800 shots Approx. 750 shots 50% Flash Use Approx. 700 shots C Approx.
3 Setting the Date and Time When you turn on the power for the first time or if the date/time has been reset, the Date/Time setting screen will appear. Follow steps 3 and 4 to set the date/time. Note that the date/time appended to recorded images will be based on this date/time setting. Be sure to set the correct date/time. 1 Display the menu screen. Press the button to display the menu screen. the [6] tab, select [Date/ 2 Under Time]. Press the key to select the [6] tab.
3 Selecting the Interface Language 1 Display the menu screen. Press the button to display the menu screen. the [6] tab, select 2 Under [LanguageK]. Press the key to select the [6] tab. Press the key to select [LanguageK] (the fourth item from the top), then press <0>. C Y P O the desired language. 3 SetPress the key to select the language, then press <0>. X The interface language will change.
Attaching and Detaching a Lens Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’ red or white index with White index the camera’s index matching the same color. Turn the lens as shown by the arrow until it snaps in place. Red index Y P O the lens, set the focus mode 3 On switch to (autofocus). C If it is set to (manual focus), autofocus will not operate. 4 Remove the front lens cap.
Attaching and Detaching a Lens About Zooming To zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus slightly. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrows. Y P O Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. C Do not look at the sun directly through any lens.
About the Lens Image Stabilizer When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a sharper shot. The procedure explained here is based on the EF-S18-55mm f/3.5-5.6 IS II lens as an example. * IS stands for Image Stabilizer. 1 Set the IS switch to <1>. Set also the camera’s power switch to <1>. the shutter button halfway. 2 Press X The Image Stabilizer will operate. the picture.
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right until the nine AF points in the viewfinder look sharp. If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens E (10 types, sold separately) is recommended. Holding the Camera Y P O To obtain sharp images, hold the camera still to minimize camera shake. C Horizontal shooting Vertical shooting 1.
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder (0). While you press the shutter button halfway, the LCD monitor will turn off (p.166).
Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor. This is called the Quick Control screen. 1 Press the button. X The Quick Control screen will appear (7). the desired function. 2 SetPress the key to select the function to be set. X The selected function and Feature guide (p.47) will be displayed. Turn the <6> dial to change the setting. Basic Zone modes Y P O Creative Zone modes C the picture.
Q Quick Control for Shooting Functions Settable Functions on Quick Control Screen White balance correction* (p.117) Shutter speed (p.92) Exposure compensation/ AEB setting (p.101, 103) Aperture (p.94) Highlight tone priority* (p.220) ISO speed (p.77) Shooting mode* (p.22) Flash exposure compensation (p.102) Picture Style (p.79) Raise built-in flash Image-recording quality (p.74) AF mode (p.81) White balance (p.115) Auto Lighting Optimizer (p.107) Drive mode (p.86, 87) Y P O Metering mode (p.
3 Menu Operations With menus, you can set various functions such as the image-recording quality, date/time, etc. While looking at the LCD monitor, use the button, cross keys, and <0> button on the camera back to operate the menus. <0> button Cross keys LCD monitor button Menu Screen Y P O In the Basic Zone, Movie shooting mode, and Creative Zone, the tabs and menu options displayed will be different.
3 Menu Operations Menu Setting Procedure 1 Display the menu screen. Press the button to display the menu screen. a tab. 2 Select Press the key to select a menu tab. the desired item. 3 Select Press the key to select the item, then press <0>. Y P O the setting. 4 Select Press the or key to C select the desired setting. (Some settings require you to press either the or key to select it.) The current setting is indicated in blue. the desired setting.
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images to a computer, etc., before formatting the card. 1 Select [Format]. Under the [5] tab, select [Format], then press <0>. Y P O the card. 2 Format Select [OK], then press <0>.
3 Formatting the Card Execute [Format] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed (p.250). About Low-level Formatting Do low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase all data in the card.
Switching the LCD Monitor Display The LCD monitor can display the shooting settings screen, menu screen, captured images, etc. Shooting Settings When you turn on the power switch, the shooting settings will be displayed. When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on. You can also turn off the display by pressing the button. Press the button again to turn on the display.
Feature Guide The Feature guide is a simple description of the respective function or option. It is displayed when you change the shooting mode or use the Quick Control screen to set a shooting function, Live View shooting, movie shooting, or playback. When you select a function or option on the Quick Control screen, the Feature guide description is displayed. The Feature guide turns off when you further proceed with any operation.
C 48 Y P O
Basic Shooting and Image Playback Y P O This chapter explains how to use the Basic Zone modes on the Mode Dial for best results and how to playback images. C With Basic Zone modes, all you do is point and shoot and the camera sets everything automatically (p.63, 232). Also, to prevent botched pictures due to mistaken operations, major shooting settings cannot be changed in fully-automatic modes. Ba sic Zone About the Auto Lighting Optimizer In Basic Zone modes, the Auto Lighting Optimizer (p.
1 Fully Automatic Shooting 1 AF point Set the Mode Dial to <1>. any AF point over the 2 Aim subject. All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier. the subject. 3 Focus Press the shutter button halfway, and Y P O the lens focusing ring will rotate to focus. X The dot inside the AF point achieving focus flashes briefly in red.
1 Fully Automatic Shooting FAQ The focus confirmation light blinks and focus is not achieved. Aim the AF point over an area having good contrast, then press the shutter button halfway (p.39). If you are too close to the subject, move away and try again. Sometimes multiple AF points flash simultaneously. This indicates that focus has been achieved at all those AF points. When the AF point covering the desired subject flashes, take the picture. The beeper continues to beep softly.
1 Full Auto Techniques Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the <1> (Full Auto) mode, while you press the shutter button halfway to focus a still subject, the focus will be locked. You can then recompose the shot and press the shutter button completely to take the picture. This is called “focus lock”. Focus lock is also possible in other Basic Zone modes (except <5> Sports).
1 Full Auto Techniques A Live View Shooting By pressing the button, you can shoot while viewing the image on the camera’s LCD monitor. This is called Live View shooting. For details, see page 121. 1 Display the Live View image on the LCD monitor. Press the button. X The Live View image will appear on the LCD monitor. the subject. 2 Focus Aim the center AF point < C > on the subject. Press the shutter button halfway to focus.
7 Disabling Flash In places where flash photography is prohibited, use the <7> (Flash Off) mode. This mode is also effective for capturing the particular ambience of a scene, such as candlelight scenes. Shooting Tips C Y P O Prevent camera shake if the numeric display in the viewfinder blinks. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod.
C Creative Auto Shooting Unlike the <1> Full Auto mode where the camera sets everything, the Creative Auto mode enables you to easily change the depth of field, drive mode, and flash firing. You can also choose the ambience you want to convey in your images. The default setting is the same as the <1> (Full Auto) mode. * CA stands for Creative Auto. 1 Set the Mode Dial to . the button. (7) 2 Press X The Quick Control screen will appear. Y P 3O C Set the desired function.
C Creative Auto Shooting (1) Shutter speed Aperture ISO speed (2) (3) Battery check Possible shots Image-recording quality Pressing the button enables you to set the following: Y P O (1) Shoot by ambience selection You can set the ambience you want to convey in your images. Press the key or turn the <6> dial to select the desired ambience. You can also select it from a list by pressing <0>. For details, see page 64.
C Creative Auto Shooting (3)Drive mode/Flash firing When you press <0>, the drive mode or flash firing setting screens will appear. Set as desired, then press <0> to finalize the setting and return to the Quick Control screen. Drive mode: Press the key or turn the <6> dial to set it as desired. Single shooting : Shoot one image at a time. Continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to about 3 shots per sec.
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and the hair look softer than with the <1> (Full Auto) mode. Shooting Tips C Y P O The further the distance between the subject and background, the better. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better in front of a plain, dark background. Use a telephoto lens.
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery, night scenes, or to have everything in focus from near to far. The greens and blues also become more vivid and the image sharper than with <1> (Full Auto). Shooting Tips C Y P O With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end. It also adds breadth to landscapes. Shooting night scenes.
4 Shooting Close-ups When you want to photograph flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips C Y P O Use a simple background. A simple background makes the flower, etc., stand out better. Move to the subject as close as possible. Check the lens for its minimum focusing distance. Some lenses have indications such as <40.25m/0.8ft>.
5 Shooting Moving Subjects To photograph a moving subject, whether it is a child running or a moving vehicle, use the <5> (Sports) mode. Shooting Tips C Y P O Use a telephoto lens. Using a telephoto lens is recommended so you can shoot from afar. Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly.
6 Shooting Portraits at Night To shoot someone at night and obtain a natural-looking exposure in the background, use the <6> (Night Portrait) mode. Shooting Tips C Y P O Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod to prevent camera shake. Keep the person within 5 meters/16.4 feet from the camera. Under low light, the built-in flash will fire automatically to obtain a good exposure of the person.
Q Quick Control In Basic Zone modes when the shooting settings screen is displayed, you can press the button to display the Quick Control screen. The table below indicates the functions that can be set with the Quick Control screen in each Basic Zone mode. Example: Portrait mode 1 Set the Mode Dial to a Basic Zone mode. 2 Press the button. (7) X The Quick Control screen will appear. 3 Set the function. Y P O Press the key to select a function. (Step not necessary in the 1/7 mode.
Shoot by Ambience Selection Except in the <1> (Full Auto) and <7> (Flash Off) Basic Zone modes, you can select the ambience for shooting.
Shoot by Ambience Selection the ambience effect. 4 SetPress the key to select the effect bar so that [Effect] appears at the bottom. Press the key or turn the <6> dial to select the desired effect. the picture. 5 TakeTo shoot while the Live View image is C displayed, press the shutter button. To return to viewfinder shooting, press the button to exit Live View shooting. Then press the shutter button completely to take the picture.
Shoot by Ambience Selection Ambience Settings (1) Standard setting Standard image characteristics for the respective shooting mode. Note that <2> has image characteristics geared for portraits and <3> is geared for landscapes. Each ambience is a modification of the respective shooting mode’s image characteristics. (2) Vivid The subject will look sharp and vivid. It makes the photo look more impressive than with [Standard setting]. (3) Soft The subject will look softer and more dainty.
Shoot by Lighting or Scene Type In the <2> (Portrait), <3> (Landscape), <4> (Close-up), and <5> (Sports) Basic Zone modes, you can shoot while the settings match the lighting or scene type. Normally, [Default setting] is adequate, but if the settings match the lighting condition or scene, the picture will look more accurate to your eye. For Live View shooting, if you set both [Shoot by lighting or scene type] and [Shoot by ambience selection] (p.64), you should first set [Shoot by lighting or scene type].
Shoot by Lighting or Scene Type the Quick Control screen, 3 On select the lighting or scene type. Press the button (7). Press the key to select [Default setting]. [Shoot by lighting or scene type] will appear on the screen’s bottom. Press the key or turn the <6> dial to select the desired lighting or scene type. X The LCD monitor will show how the image will look with the selected lighting or scene type. the picture.
Shoot by Lighting or Scene Type Lighting or Scene Type Settings (1) Default setting The default setting. (2) Daylight For subjects under sunlight. Gives more natural-looking blue skies and greenery and reproduces light-colored flowers better. (3) Shade For subjects in the shade. Suitable for skin tones, which may look too bluish, and for light-colored flowers. (4) Cloudy For subjects under overcast skies. Makes skin tones and landscapes, which may otherwise look dull on a cloudy day, look warmer.
x Image Playback The easiest way to playback images is explained below. For more details on the playback procedure, see page 175. 1 Playback the image. When you press the button, the last image captured will be displayed. an image. 2 Select To view images starting with the last image, press the key. To view images starting with the first (oldest) image, press the key. Each time you press the button, the display format will change.
Creative Shooting Y P O In the Basic Zone modes, to prevent spoiled shots, most functions are set automatically and cannot be changed. In the (Program AE) mode, you can set various functions and be more creative. C In the mode, the camera sets the shutter speed and aperture automatically to obtain a standard exposure. The difference between the Basic Zone modes and is explained on page 232.
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. 1 Set the Mode Dial to . the subject. 2 Focus Look through the viewfinder and aim the selected AF point over the subject. Then press the shutter button halfway. X The dot inside the AF point achieving focus lights briefly in red, and the focus confirmation light in the viewfinder’s bottom right lights (with One Shot AF).
d: Program AE Shooting Tips Change the ISO speed or use the built-in flash. To match the subject and ambient lighting level, you can change the ISO speed (p.77) or use the built-in flash (p.88). In the mode, the built-in flash will not fire automatically. So under low light, press the (Flash) button to pop up the built-in flash. (You can also pop up the built-in flash by selecting the icon on the Quick Control screen.) The program can be shifted.
3 Setting the Image-recording Quality You can select the pixel count and the image quality. Ten imagerecording quality settings are provided: 73, 83, 74, 84, 7a, 8a, b, c, 1, 1+73. 1 Pixel count Possible shots Select [Quality]. Under the [1] tab, select [Quality], then press <0>. X [Quality] will appear. the image-recording 2 Select quality. The respective quality’s pixel count and number of possible shots will be displayed to help you select the desired quality. Then press <0>.
3 Setting the Image-recording Quality FAQ I want to select the image-recording quality matching the paper size for printing. Refer to the diagram on the left when Paper size choosing the image-recording quality. If A3 (42x29.7cm/16.5x11.7in.) you want to crop the image, selecting a 73 higher quality (more pixels) such as 73, 83 A4 (29.7x21cm/ 1 11.7x8.3in.) 83, 1, or 1+73 is recommended. 1+73 b is suitable for playing the images on a 74 84 7a digital photo frame.
3 Setting the Image-recording Quality About 1 1 is the raw image data before it is made into 73 or other images. Although 1 images require software like Digital Photo Professional (provided, p.270) so they can be displayed on the computer, they also offer flexibility for image adjustments possible only with 1. 1 is effective when you want to precisely adjust the image yourself or shoot an important subject. About 1+73 1+73 records both a 1 and 73 image with a single shot.
Z: Changing the ISO SpeedN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically (p.78). 1 Press the button. X [ISO speed] will appear. the ISO speed. 2 SetPress the key or turn the <6> dial to select the desired ISO speed, then press <0>. With [AUTO] selected, the ISO speed will be set automatically (p.78).
Z: Changing the ISO SpeedN ISO [AUTO] If the ISO speed is set to [AUTO], the actual ISO speed to be set will be displayed when you press the shutter button halfway. As indicated below, the ISO speed will be set automatically to suit the shooting mode. Shooting Mode ISO Speed Setting 1/7/C/3/4/5/6 Automatically set within ISO 100 - 3200 d/s/f/a*1/8 Automatically set within ISO 100 - 6400*2 2 Fixed at ISO 100 With flash Fixed at ISO 800*3*4*5 Y P O *1: Fixed at ISO 800 for bulb exposures.
A Selecting the Subject’s Optimal Image CharacteristicsN By selecting a Picture Style, you can obtain image characteristics matching your photographic expression or the subject. In Basic Zone modes, you cannot select the Picture Style. 1 Select [Picture Style]. Under the [2] tab, select [Picture Style], then press <0>. X The Picture Style selection screen will appear. a Picture Style. 2 Select Select a Picture Style, then press <0>. Y P O X The Picture Style will be set and the menu reappears.
A Selecting the Subject’s Optimal Image CharacteristicsN S Neutral This Picture Style is for users who prefer to process images with their computer. For natural colors and subdued images. U Faithful This Picture Style is for users who prefer to process images with their computer. When the subject is captured under a color temperature of 5200K, the color is adjusted colorimetrically to match the subject’s color. The image looks dull and subdued. V Monochrome Creates black-and-white images.
E: Changing the Autofocus ModeN You can select the AF (autofocus) mode to suit the shooting conditions or subject. In Basic Zone modes, the most suitable AF mode is set automatically. 1 On the lens, set the focus mode switch to . the button. 2 Press X [AF mode] will appear. Y P O the AF mode. 3 Select Press the key or turn the C4 <6> dial to select the desired AF mode, then press <0>. Focus the subject. Aim the AF point over the subject and press the shutter button halfway.
E: Changing the Autofocus ModeN If focus cannot be achieved, the focus confirmation light in the viewfinder will blink. If this occurs, a picture cannot be taken even if the shutter button is pressed completely. Recompose the picture and try to focus again. Or see “Subjects Difficult to Focus” (p.85). If [1 Beep] is set to [Disable], the beeper will not sound when focus is achieved. AI Servo AF for Moving Subjects This AF mode is for moving subjects when the focusing distance keeps changing.
S Selecting the AF Point N In Basic Zone modes, the camera will normally focus the closest subject automatically. Therefore, it might not always focus your target subject. In the , , , and modes, you can select the AF point and use it to focus the target subject. 1 Press the button. (9) X The currently-selected AF point will be displayed on the LCD monitor and in the viewfinder. the desired AF point. 2 Select Press the key to select the AF C point.
S Selecting the AF Point N Shooting Tips When shooting a portrait up close, use One-Shot AF and focus the eyes. If you focus the eyes first, you can then recompose and the face will remain sharp. If it is difficult to focus, select and use the center AF point. The center AF point is the most sensitive among the nine AF points. To make it easier to focus a moving subject, set the camera to automatic AF point selection and AI Servo AF (p.82). The center AF point will first be used to focus the subject.
Subjects Difficult to Focus Autofocus can fail to achieve focus (viewfinder’s focus confirmation light blinks) with certain subjects such as the following: Very low-contrast subjects. (Example: Blue sky, solid-color walls, etc.) Subjects in very low light Extremely backlit or reflective subjects (Example: Car with a highly reflective body, etc.) Near and far subjects covered by an AF point (Example: Animal in a cage, etc.) Repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.
i Continuous ShootingN You can shoot up to about 3 shots per sec. This is effective for shooting a child running toward you or capturing different facial expressions. 1 Press the button. . 2 Select Press the key or turn the <6> dial to select continuous shooting , then press <0>. The continuous shooting speed will vary depending on the imagerecording quality (p.74). JPEG : Max. approx. 3 fps 1 : Max. approx. 2 fps 1+73 : Approx. 0.8 fps (averaged value) Y P O picture.
j Using the Self-timer 1 Press the button. the self-timer. 2 Select Press the key or turn the <6> dial to select the desired selftimer, then press <0>. j : 10-sec. self-timer l : 2-sec. self-timerN q : 10-sec. self-timer plus continuous shots Press the key to set the number of continuous shots (2 to 10) to be taken with the self-timer. Y P O picture. 3 TakeLookthethrough the viewfinder, focus C the subject, then press the shutter button completely.
D Using the Built-in Flash In indoors, low light, or backlit conditions in daylight, just raise the builtin flash and press the shutter button to take flash pictures. In the mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake. 1 Press the button. In Creative Zone modes, you can press the button anytime to take flash pictures. While the flash is recycling, “DbuSY” is displayed in the viewfinder, and [BUSYD] is displayed on the LCD monitor.
D Using the Built-in Flash Shooting Tips If the subject is far away, increase the ISO speed (p.77). By increasing the ISO speed, you can extend the flash range. In bright light, decrease the ISO speed. If the exposure setting in the viewfinder blinks, decrease the ISO speed. Detach the lens hood and keep at least 1 meter/3.3 feet away from the subject. If the lens has a hood attached or you are too close to the subject, the bottom of the picture might look dark due to the obstructed flash.
C 90 Y P O
Advanced Shooting Y P O This chapter builds on Chapter 3 and introduces more ways to shoot creatively. The first half of this chapter explains how to use the <8> modes on the Mode Dial. All the functions explained in Chapter 3 can also be used in the , , and modes. To see which functions can be used in each shooting mode, see page 232. The M mark shown on the right of the page title indicates that the function is available only in Creative Zone modes (p.22).
s: Action Shots You can either freeze the action or create motion blur with the (Shutter-priority AE) mode on the Mode Dial. * stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) 1 Frozen action (Fast shutter speed: 1/2000 sec.) Set the Mode Dial to . Y P O the desired shutter speed. 2 SetSee “Shooting Tips” for advice on C setting the shutter speed. Turning the <6> dial to the right sets a faster shutter speed, and turning it to the left sets a slower one. the picture.
s: Action Shots Shooting Tips To freeze the action or moving subject. Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. To blur a running child or animal giving the impression of fast movement. Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow the moving subject through the viewfinder and press the shutter button to take the picture. If you use a telephoto lens, hold it steady to prevent camera shake. How to blur a flowing river or water fountain.
f: Changing the Depth of Field To blur the background or to make everything near and far look sharp, set the Mode Dial to (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * stands for Aperture value which is the size of the diaphragm hole inside the lens. Blurred background (With a low aperture f/number: f/5.6) 1 Sharp foreground and background (With a high aperture f/number: f/32) Set the Mode Dial to . Y P O desired aperture.
f: Changing the Depth of Field Shooting Tips When using an aperture with a high f/number, note that camera shake can occur in low light scenes. A higher aperture f/number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec. In such cases, increase the ISO speed and hold the camera steady or use a tripod. The depth of field depends not only on the aperture, but also on the lens and on the subject distance.
f: Changing the Depth of Field I Using the Built-in Flash To obtain a correct flash exposure, the flash output will be set automatically to match the set aperture (autoflash exposure). The shutter speed will be set automatically between 1/200 sec. - 30 sec. to suit the scene’s brightness. In low light, the main subject is exposed with the automatic flash, and the background is exposed with a slow shutter speed set automatically.
a: Manual Exposure You can set both the shutter speed and aperture manually as desired. While referring to the exposure level indicator in the viewfinder, you can set the exposure as desired. This method is called manual exposure. * stands for Manual. 1 Set the Mode Dial to . the shutter speed and 2 Set aperture. To set the shutter speed, turn the <6> dial. To set the aperture, hold down the button and turn the <6> dial. <6> + <6> Standard exposure index the subject.
a: Manual Exposure I Using the Built-in Flash To obtain a correct flash exposure, the flash output will be set automatically (autoflash exposure) to match the manually-set aperture. The flash sync speed can be set from 1/200 sec. to 30 sec. and bulb. BULB: Bulb Exposures A bulb exposure keeps the shutter open for as long as you hold down the shutter button. It can be used to photograph fireworks, etc. In step 2 on the preceding page, turn the <6> dial to the left to set .
8: Automatic Depth-of-Field AE Objects in the foreground and background will be in focus automatically. All the AF points will function to detect the subject, and the aperture required to attain the necessary depth of field will be set automatically. * <8> stands for Auto-Depth of field. This mode sets the depth of field automatically. 1 Set the Mode Dial to <8>. the subject. 2 Focus Aim the AF points over the subjects and press the shutter button halfway (0).
q Changing the Metering ModeN Three methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, evaluative metering is set automatically. 1 Select [Metering mode]. Under the [2] tab, select [Metering mode], then press <0>. the metering mode. 2 SetSelect the desired metering mode, then press <0>. q Evaluative metering Y P O This is an all-around metering mode suited for portraits and even backlit subjects.
Setting Exposure CompensationN O Setting Exposure Compensation Set exposure compensation if the exposure (without flash) does not come out as desired. This feature can be used in Creative Zone modes (except ). You can set the exposure compensation up to ±5 stops in 1/3-stop increments. Increased exposure for a brighter image Making it brighter: Hold down the button and turn the <6> dial to the right. (Increased exposure) Making it darker: Hold down the button and turn the <6> dial to the left.
Setting Exposure CompensationN y Flash Exposure Compensation Set flash exposure compensation if the flash exposure of the subject does not come out as desired. You can set the flash exposure compensation up to ±2 stops in 1/3-stop increments. 1 Press the button. (7) X The Quick Control screen will appear (p.40). [y]. 2 Select Press the key to select [y*]. X [Flash exposure comp.] will be Y P O displayed at the bottom. the flash exposure 3 Set compensation amount.
3 Auto Exposure BracketingN This feature takes exposure compensation a step further by varying the exposure automatically (up to ±2 stops in 1/3-stop increments) with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure Darker exposure (Decreased exposure) 1 Brighter exposure (Increased exposure) Select [Expo. comp./AEB]. Under the [2] tab, select [Expo. comp./AEB], then press <0>. Y P O the AEB amount.
3 Auto Exposure BracketingN Canceling AEB Follow steps 1 and 2 to turn off the AEB amount display. The AEB setting will also be canceled automatically if the power switch is set to <2>, flash recycling is completed, etc. Shooting Tips Using AEB with continuous shooting: If continuous shooting (p.86) has been set and you press the shutter button completely, the three bracketed shots will be taken continuously in this sequence: Standard exposure, decreased exposure, and increased exposure.
A Locking the ExposureN You can lock the exposure when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the shot. This is called AE (autoexposure) lock. It is effective for backlit subjects. 1 Focus the subject. Press the shutter button halfway. X The exposure setting will be displayed. the button.
A Locking the Flash ExposureN If the subject is on the side of the frame and you use flash, the subject may turn out to be too bright or dark depending on the background, etc. This is when you should use FE lock. After setting the proper flash exposure for the subject, you can recompose (put the subject toward the side) and shoot. This feature can also be used with a Canon EX-series Speedlite. * FE stands for Flash Exposure. 1 Press the button. X The built-in flash will rise.
3 Correcting the Brightness and Contrast AutomaticallyN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This feature is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is done when the image is captured. For RAW images, it can be corrected with Digital Photo Professional (provided software, p.270). 1 Select [Auto Lighting Optimizer].
3 Correcting the Image’s Dark Corners Due to the lens characteristics, the four corners of the picture might look darker. This phenomenon is called lens light fall-off or drop in peripheral illumination and can be corrected automatically. The default setting is [Enable]. With JPEG images, the correction is done when the image is captured. For RAW images, it can be corrected with Digital Photo Professional (provided software, p.270). 1 Select [Peripheral illumin. correct.].
3 Correcting the Image’s Dark Corners About the Lens Correction Data The camera already contains lens peripheral illumination correction data for about 25 lenses. In step 2, if you select [Enable], the peripheral light correction will be applied automatically for any lens whose correction data has been registered in the camera. With EOS Utility (provided software, p.270), you can check which lenses have their correction data registered in the camera.
A Customizing Image CharacteristicsN You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see page 112. 1 Select [Picture Style]. Under the [2] tab, select [Picture Style], then press <0>. X The Picture Style selection screen will appear. a Picture Style. 2 Select Select a Picture Style, then press the button. Y P O X The Detail set. screen will appear. 3 Select a parameter.
A Customizing Image CharacteristicsN Parameter Settings and Effects Sharpness Adjusts the sharpness of the image. To make it less sharp, set it toward the E end. The closer it is to E, the softer the image will look. To make it sharper, set it toward the F end. The closer it is to F, the sharper the image will look. Contrast Adjusts the image contrast and the vividness of colors. To decrease the contrast, set it toward the minus end. The closer it is to G, the blander the image will look.
A Customizing Image CharacteristicsN V Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page. kFilter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Y P O Sample Effects N: None Normal black-and-white image with no filter effects.
A Registering Preferred Image CharacteristicsN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as sharpness and contrast are different. You can also adjust the parameters of a Picture Style which has been registered to the camera with EOS Utility (provided software, p.270). 1 Select [Picture Style].
A Registering Preferred Image CharacteristicsN a parameter. 5 Select Select a parameter such as [Sharpness], then press <0>. the parameter. 6 SetPress the key to adjust the parameter as desired, then press <0>. For details, see “Customizing Image Characteristics” on pages 110-112. Y P O Press the button to register the modified Picture Style. The Picture Style selection screen will then reappear. X The base Picture Style will be indicated on the right of [User Def. *].
B: Matching the Light SourceN The function adjusting the color tone so that white objects look white in the picture is called white balance (WB). Normally, the (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with , you can select the white balance to match the light source or set it manually by shooting a white object. the button. 1 Press X [White balance] will appear. the white balance.
B: Matching the Light SourceN [Custom White Balance]. 2 Select Under the [2] tab, select [Custom White Balance], then press <0>. X The custom white balance selection screen will appear. the white balance data. 3 Import Select the image that was captured in step 1, then press <0>. X On the dialog screen which appears, select [OK] and the data will be imported. When the menu reappears, press the button to exit the menu. Y P O the custom white balance. 4 Select Press the button.
2 Adjusting the Color Tone for the Light SourceN You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This is for advanced users who are familiar with using color temperature conversion or color compensating filters. White Balance Correction 1 Select [WB Shift/BKT].
2 Adjusting the Color Tone for the Light SourceN White Balance Auto Bracketing With just one shot, three images having a different color balance can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing (WB-BKT). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
3 Setting the Color Reproduction RangeN The range of reproducible colors is called the color space. With this camera, you can set the color space to sRGB or Adobe RGB for captured images. For normal shooting, sRGB is recommended. In Basic Zone modes, sRGB is set automatically. 1 Select [Color space]. Under the [2] tab, select [Color space], then press <0>. the desired color space. 2 SetSelect [sRGB] or [Adobe RGB], then press <0>.
C 120 Y P O
Shooting with the LCD Monitor (Live View Shooting) Y P O You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended. C About Remote Live View Shooting With EOS Utility (provided software, p.
A Shooting with the LCD Monitor 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. The Live View image will closely reflect the brightness level of the actual image you capture. the subject. 2 Focus When you press the shutter button halfway, the camera will focus with the current AF mode (p.128-134). Y P O the picture. 3 TakePress the shutter button completely.
A Shooting with the LCD Monitor Enabling Live View Shooting Set [Live View shoot.] to [Enable]. In Basic Zone modes, [Live View shoot.] will be displayed under [2], and in Creative Zone modes, it will be displayed under [z]. Battery Life with Live View Shooting [Approx.
A Shooting with the LCD Monitor About the Information Display Each time you press the button, the information display will change.
A Shooting with the LCD Monitor Final Image Simulation The final image simulation reflects the effects of the Picture Style, white balance, etc., in the Live View image so you can see what the captured image will look like. During still photo shooting, the Live View image will automatically reflect the settings listed below. Final image simulation during Live View shooting Picture Style * All parameters such as sharpness, contrast, color saturation, and color tone will be reflected.
Shooting Function Settings Function settings particular to Live View shooting are explained here. Q Quick Control While the image is displayed on the LCD monitor in Creative Zone modes, pressing the button will enable you to set the AF mode, drive mode, white balance, Picture Style, Auto Lighting Optimizer, image-recording quality, and ISO speed. In Basic Zone modes, you can set the AF mode and the settings shown in the table on page 63. 1 Press the button.
z Menu Function Settings The menu options below are displayed. In Basic Zone modes, the Live View menu options will be displayed under [2], and in Creative Zone modes, they will be displayed under [z]. Live View shooting You can set Live View shooting to [Enable] or [Disable]. AF mode You can select [Live mode] (p.128), [u Live mode] (p.129), or [Quick mode] (p.133). Grid display With [Grid 1l] or [Grid 2m], you can display grid lines. It can help you level the camera vertically or horizontally.
Changing the Autofocus Mode Selecting the AF Mode The AF modes available are [Live mode], [u Live mode] (face detection, p.129), and [Quick mode] (p.133). If you want to achieve precise focus, set the lens focus mode switch to , magnify the image, and focus manually (p.135). Select the AF mode. Under the [z] tab, select [AF mode]. Select the desired AF mode, then press <0>. While the Live View image is displayed, you can press the button to select the AF mode on the Quick Control screen (p.126).
Changing the Autofocus Mode the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange. the picture. 4 TakeCheck the focus and exposure, then press the shutter button completely to take the picture (p.122). Y P O u (Face detection) Live Mode: c C With the same AF method as the Live mode, human faces are detected and focused.
Changing the Autofocus Mode the subject. 2 Focus Press the shutter button halfway and the camera will focus the face covered by the
frame. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange. If a face cannot be detected, the AF point < > will be displayed and AF will be executed at the center. the picture. 3 TakeCheck the focus and exposure, then Y P O press the shutter button completely to take the picture (p.
Changing the Autofocus Mode Live Mode and u (Face Detection) Live Mode Notes AF operation Focusing will take slightly longer. Even when focus has been achieved, pressing the shutter button halfway will focus again. The image brightness may change during and after the AF operation. If the light source changes while the Live View image is displayed, the screen might flicker and focusing may be difficult. If this happens, stop the Live View shooting and autofocus under the actual light source first.
Changing the Autofocus Mode Shooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color, flat surfaces. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Under a light source whose brightness, color, or pattern keeps changing. Night scenes or points of light. Under fluorescent lighting or when the image flickers. Extremely small subjects. Subjects at the edge of the picture.
Changing the Autofocus Mode Quick Mode: f The dedicated AF sensor is used to focus in One-Shot AF mode (p.81), using the same AF method as with viewfinder shooting. Although you can focus the target area quickly, the Live View image will be interrupted momentarily during the AF operation. AF point 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. The small boxes on the screen are the AF points, and the larger box is the magnifying frame.
Changing the Autofocus Mode the subject. 3 Focus Aim the AF points over the subject and press the shutter button halfway. X The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. X When focus is achieved, the AF point which achieved focus will turn green and the Live View image will reappear. X If focus is not achieved, the AF point will turn orange and blink. the picture.
MF: Focusing Manually You can magnify the image and focus precisely manually. 1 Set the lens focus mode switch to . Turn the lens focusing ring to focus roughly. the magnifying frame. 2 Move Press the key to move the magnifying frame to the position where you want to focus. To return the magnifying frame to the center, press <0>. (If C.Fn-8 has been set, press + <0>.) Magnifying frame Y P O the image. 3 Magnify Press the button.
Live View Shooting Cautions White and Red Internal Temperature Warning Icons If the camera’s internal temperature increases due to prolonged Live View shooting or a high ambient temperature, a white icon will appear. If you continue shooting while this icon is displayed, the image quality of still photos may deteriorate. You should stop the Live View shooting and allow the camera to cool down before shooting again.
Live View Shooting Cautions Shooting Result Cautions When you shoot continuously with the Live View function for a long period, the camera’s internal temperature may increase and it can degrade image quality. Terminate Live View shooting when not shooting images. Before taking a long exposure, stop Live View shooting temporarily and wait several minutes before shooting. This is to prevent image degradation. Live View shooting in high temperatures and at high ISO speeds may cause noise or irregular colors.
C 138 Y P O
Shooting Movies Y P O When you set the Mode Dial to , you can shoot HighDefinition (HD) movies. The movie recording format will be MOV. C Cards which can record movies When shooting movies, use a large-capacity SD card rated SD Speed Class 6 “ ” or higher. If you use a slow-writing card when shooting movies, the movie might not be recorded properly. And if you playback a movie on a card having a slow reading speed, the movie might not playback properly.
k Shooting Movies When you set the shooting mode to , you can easily shoot HighDefinition (HD) movies with autoexposure. When playing movies, connecting the camera to a TV set is recommended (p.184, 191). 1 Set the Mode Dial to . X The reflex mirror will make a sound, then the image will appear on the LCD monitor. the subject. 2 Focus Before shooting a movie, autofocus or manual focus (p.128-135). When you press the shutter button halfway, the camera will focus with the current AF mode.
k Shooting Movies In the movie shooting mode, you cannot take a still photo even if you press the shutter button completely. During movie shooting, do not point the lens toward the sun. The sun’s heat can damage the camera’s internal components. Cautions for movie shooting are on pages 150 and 151. If necessary, also read the Live View shooting cautions on pages 136 and 137. A movie file is recorded each time you shoot a movie. The image’s field of view is approx. 99%.
k Shooting Movies About the Information Display Each time you press the button, the information display will change.
k Shooting Movies Final Image Simulation The final image simulation reflects the effects of the Picture Style, white balance, etc., in the movie image so you can see what the captured movie will look like. During movie shooting, the movie image will automatically reflect the settings listed below. Final image simulation for movie shooting Picture Style * All parameters such as sharpness, contrast, color saturation, and color tone will be reflected.
Shooting Function Settings Function settings particular to movie shooting are explained here. Q Quick Control While the movie image is displayed on the LCD monitor, you can press the button to enable the following to be set: AF mode, white balance, Picture Style, and Auto Lighting Optimizer. 1 Press the button. (7) X The functions settable with Quick Control will appear on the left of the screen. If the AF mode is , the AF point will also be displayed. Y P O a function and set it.
3 Menu Function Settings The menu options displayed under the [w], [x], and [y] tabs are explained below. [w] tab AF mode The AF modes will be the same as described on pages 128-134. You can select [Live mode], [u Live mode], or [Quick mode]. Note that continuous focusing of a moving subject is not possible. AF with shutter button during k (movie recording) When [Enable] is set, AF is possible during movie shooting. However, continuous autofocusing is not possible.
3 Menu Function Settings kShutter/AE lock button You can change the function assigned to the shutter button’s halfway position and to the AE lock button. • AF/AE lock: Normal function. Press the shutter button halfway to execute AF. Press the button for AE lock. • AE lock/AF: Press the shutter button halfway for AE lock. For AF, press the button. Convenient when you want to focus and meter at different parts of the picture. • AF/AF lock, no AE lock: Press the shutter button halfway to execute AF.
3 Menu Function Settings [x] tab Movie recording size The movie will be recorded in [1280x720] High-Definition (HD) quality. You can select the frame rate [6] or [5] (recorded frames per second) to suit your TV set’s video format. * The frame rate is expressed as fps or frames per second. [6] : For areas where the TV video format is NTSC (North America, Japan, Korea, Mexico, etc.). [5] : For areas where the TV video format is PAL (Europe, Russia, China, Australia, etc.).
3 Menu Function Settings Sound recording When the sound recording is set to [On], sound will be recorded by the built-in monaural microphone. The sound recording level will be adjusted automatically. An external microphone cannot be used. Metering timer You can change how long the exposure setting is displayed (AE lock time). Grid display With [Grid 1l] or [Grid 2m], you can display grid lines. It can help you level the camera vertically or horizontally.
3 Menu Function Settings [y] tab Exposure compensation You can set exposure compensation for movies up to ±3 stops in 1/3-stop increments. Auto Lighting Optimizer The Auto Lighting Optimizer can be set as explained on page 107. If the [w] menu tab’s [kHighlight tone priority] is set to [Enable], the Auto Lighting Optimizer will be set automatically to [Disable] and cannot be changed. Y P O Custom White Balance As explained on page 115, the image for custom white balance can be selected.
About the Red Internal Temperature Warning Icon If the camera’s internal temperature is high, a blinking red icon may appear. This blinking icon is a warning that the movie shooting will soon be terminated automatically. If this happens, you will not be able to shoot again until the camera’s internal temperature decreases. Turn off the power and let the camera rest for a while. Movie shooting at a high temperature for a prolonged period will cause the icon to appear sooner.
Movie Shooting Cautions Playback and TV connection If the brightness changes during movie shooting, that part might look momentarily still when you playback the movie. If you connect the camera to a TV set with an HDMI cable (p.191) and shoot a movie, the movie being shot will be displayed at a small size on the TV. But the movie will still be properly recorded in High-Definition (HD) quality. If you connect the camera to a TV set and shoot a movie, the TV will not output any sound during the shooting.
C 152 Y P O
Handy Features Y P O Silencing the Beeper (p.154) Card Reminder (p.154) Setting the Image Review Time (p.154) Setting the Auto Power-off Time (p.155) Adjusting the LCD Monitor Brightness (p.155) Creating and Selecting a Folder (p.156) File Numbering Methods (p.158) Setting Copyright Information (p.160) Auto Rotation of Vertical Images (p.162) Checking Camera Settings (p.163) Reverting the Camera to the Default Settings (p.164) Turning the LCD Monitor Off/On (p.
Handy Features 3 Silencing the Beeper You can prevent the beeper from sounding when focus is achieved or during self-timer operation. Under the [1] tab, select [Beep], then press <0>. Select [Disable], then press <0>. 3 Card Reminder This prevents shooting if there is no card in the camera. Under the [1] tab, select [Release shutter without card], then press <0>. Select [Disable], then press <0>.
Handy Features 3 Setting the Auto Power-off Time To save battery power, the camera turns off automatically after the set time of idle operation elapses. You can set this auto power-off time. When the camera has turned off due to auto power off, you can wake it up by pressing the shutter button halfway or pressing any of the following buttons: , , , etc. If [Off] has been set, either turn off the camera yourself or press the button to turn off the LCD monitor to save battery power.
Handy Features 3 Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving captured images. Create a Folder 1 Select [Select folder]. Under the [5] tab, select [Select folder], then press <0>. Y P O [Create folder]. 2 Select Select [Create folder], then press <0>. C a new folder. 3 Create Select [OK], then press <0>.
Handy Features Selecting a Folder With the folder selection screen displayed, select a folder and press <0>. X The folder where the captured images will be saved is selected. Subsequent captured images will be recorded into the selected folder. Lowest file number Number of images in folder Folder name Highest file number About Folders C Y P O As with “100CANON” for example, the folder name starts with three digits (folder number) followed by five alphanumeric characters.
Handy Features 3 File Numbering Methods The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number will appear on your computer in this format: IMG_0001.JPG. Under the [5] tab, select [File numbering], then press <0>. The available settings are described below. Select one, then press <0>.
Handy Features [Auto reset]: The file numbering is reset to 0001 whenever you replace the card or create a folder. Whenever the card is replaced or a new folder created, the file numbering starts from 0001. This is convenient if you want to organize images according to cards or folders. If the replacement card or existing folder already contains images recorded previously, the file numbering of the new images might continue from the file numbering of the existing images in the card or folder.
Handy Features 3 Setting Copyright InformationN When you set the copyright information, it will be appended to the image as Exif information. 1 Select [Copyright information]. Under the [7] tab, select [Copyright information], then press <0>. the option to be set. 2 Select Select [Enter author’s name] or Y P O [Enter copyright details], then press <0>. X The text entry screen will appear. Select [Display copyright info.] to check the copyright information currently set.
Handy Features Text Entry Procedure Changing the entry area: Press the button to toggle between the top and bottom entry areas. Moving the cursor: Press the key to move the cursor. Entering text: In the bottom area, press the key or turn the <6> dial to select a character, then press <0> to enter it. Deleting a character: Press the button to delete one character. Y P O Exiting: After entering the text, press the button to finalize the text entry and return to the screen in step 2.
Handy Features 3 Auto Rotation of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and on the personal computer instead of horizontally. The setting of this feature can be changed. Under the [5] tab, select [Auto rotate], then press <0>. The available settings are described below. Select one, then press <0>. [OnPD] : The vertical image is automatically rotated during playback on both the camera’s LCD monitor and on the computer.
Handy Features B Checking Camera Settings While the menu is displayed, press the button to display the camera’s major function settings. While the menu is displayed, press the button to display the settings. Press the button again to return to the menu. Settings display Card remaining capacity Y P O Color space (p.119) WB correction (p.117)/ WB bracketing (p.118) C Live View shooting (p.121) Red-eye reduction (p.89) Auto rotate display (p.162) Date/Time (p.33) Beeper (p.
Handy Features 3 Reverting the Camera to the Default SettingsN The camera’s shooting settings and menu settings can be reverted to the default. This can be done in Creative Zone modes. 1 Select [Clear settings]. Under the [7] tab, select [Clear settings], then press <0>. [Clear all camera settings]. 2 Select Select [Clear all camera settings], then press <0>. C Y P O [OK]. 3 Select Select [OK], then press <0>.
Handy Features Shooting Settings AF mode AF point selection Drive mode Metering mode Image-recording Settings One-Shot AF Automatic selection u (Single shooting) q (Evaluative metering) AUTO (Auto) Max.
Handy Features 3 Turning the LCD monitor Off/On The shooting settings display (p.46) can be turned on or off by pressing the shutter button halfway. Under the [6] tab, select [LCD off/on btn], then press <0>. The available settings are described below. Select one, then press <0>. [Shutter btn.] : When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on.
3 Setting the FlashN The built-in flash and external Speedlite settings can be set with the camera’s menu. You can use the camera’s menu to set the external Speedlite function settings only if the attached EX-series Speedlite is compatible with this function. The setting procedure is the same as setting a camera menu function. Select [Flash control]. Under the [1] tab, select [Flash control], then press <0>. X The flash control screen will appear. [Flash firing] C Y P O Normally, set this to [Enable].
3 Setting the FlashN [Built-in flash func. setting] and [External flash func. setting] Settable Functions Function Flash mode [Built-in flash func. setting] E-TTL II (Fixed) Page k 168 k Shutter sync. FEB* [External flash func. setting] Flash exposure compensation 169 k — k 102 k E-TTL II meter. — 169 Zoom* — k — Wireless setting* — k — * Regarding [FEB] (Flash exposure bracketing), [Zoom], and [Wireless set.], refer to the Speedlite’s instruction manual.
3 Setting the FlashN Shutter sync. Normally, set this to [1st curtain] so that the flash fires immediately after the exposure starts. If [2nd curtain] is set, the flash will fire right before the exposure ends. When this is combined with a slow sync speed, you can create a trail of light such as from car headlights at night. With 2nd-curtain sync, a preflash is fired when you press the shutter button completely. This is to determine the exposure.
3 Setting the FlashN Setting the External Speedlite Custom Functions The Custom Functions displayed under [External flash C.Fn setting] will vary depending on the Speedlite model. 1 Display the Custom Function. Select [External flash C.Fn setting], then press <0>. the Custom Function. 2 SetPress the key to select the function number, then set the function. The procedure is the same as setting the camera’s Custom Functions (p.216). Y P O To clear all the Custom Function settings, select [Clear ext.
3 Appending Dust Delete DataN Dust entering the camera can adhere to the image sensor and cause dust spots to be visible on the captured images. To erase these dust spots, you can append the Dust Delete Data to the images. The Dust Delete Data is used by Digital Photo Professional (provided software, p.270) to erase the dust spots automatically. Preparation Get a solid-white object (paper, etc.). Set the lens focal length to 50mm or longer.
3 Appending Dust Delete DataN a solid-white object. 3 Photograph At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. X The picture will be taken in aperturepriority AE mode at an aperture of f/22. Since the image will not be saved, the data can still be obtained even if there is no card in the camera. X When the picture is taken, the camera will start collecting the Dust Delete Data.
3 Manual Sensor CleaningN If dust adhere to the image sensor and dust spots appear on the images, you can clean the image sensor yourself with a camera blower. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before cleaning the sensor, detach the lens from the camera. 1 Select [Clean manually]. Under the [6] tab, select [Clean manually], then press <0>. Y P O [OK].
3 Manual Sensor CleaningN While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor might get damaged. • Setting the power switch to <2>. • Opening the card/battery compartment cover. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor. Do not insert the blower tip inside the camera beyond the lens mount.
Image Playback Y P O This chapter explains features related to viewing photos and movies, going into more detail than in Chapter 2 “Basic Shooting and Image Playback.” Here you will find explanations about how to playback and erase photos and movies with the camera and viewing them on a TV set. C About images taken with another camera: The camera might not be able to properly display images captured with a different camera or edited with a computer or whose file name was changed.
x Searching for Images Quickly H Display Multiple Images on One Screen (Index display) Search for images quickly with the index display showing four or nine images on one screen. 1 Playback the image. When you press the button, the last image captured will be displayed. to the index display. 2 Switch Press the button. X The 4-image index display will Y P O appear. The currently-selected image will be highlighted in a blue frame. Press the button again to switch to the 9-image index display.
x Searching for Images Quickly I Jump through Images (Jump display) With the single image display, you can turn the <6> dial to jump through the images forward or back according to the jump method that was set. 1 Select [Image jump w/6]. Under the [4] tab, select [Image jump w/6], then press <0>. the jump method. 2 Select Press the key to select the jump method, then press <0>.
u/y Magnified View You can magnify a shot image by 1.5x to 10x on the LCD monitor. 1 Magnify the image. During image playback, press the button. X The image will be magnified. If you hold down the button, the image will be magnified until it reaches the maximum magnification. Press the button to reduce the magnification. If you hold down the button, the magnification will be reduced to the single image display. Magnified area position Y P O around the image.
b Rotating the Image You can rotate the displayed image to the desired orientation. 1 Select [Rotate]. Under the [3] tab, select [Rotate], then press <0>. an image. 2 Select Press the key to select the image to be rotated. You can also select an image on the index display (p.176). Y P O the image. 3 Rotate Each time you press <0>, the C image will rotate clockwise as follows: 90° → 270° → 0° To rotate another image, repeat steps 2 and 3. To exit and return to the menu, press the button.
3 Setting Ratings You can rate images and movies with one of five rating marks: l/m/ n/o/p. 1 Select [Rating]. Under the [4] tab, select [Rating], then press <0>. an image or movie. 2 Select Press the key to select the image or movie to be rated. You can display three images by pressing the button. To return to the single-image display, press the button. 3 Y P O Rate the image or movie. C Press the key to select a rating mark.
3 Setting Ratings The number next to the rating marks (l/m/n/o/p) can only go up to 999. If there are 1,000 or more images for a rating, [###] will be displayed. Taking advantage of ratings With the [4 Image jump w/6] option, you can display only the rated images and movies. With the [4 Slide show] option, you can playback only the rated images and movies. With Digital Photo Professional (provided software, p.270), you can select only the rated images and movies.
Q Quick Control During Playback When you press the button during image playback, you can set the following: [ Protect images, b Rotate, 9 Rating, e Image jump w/6]. Note that movies cannot be rotated (b Rotate). 1 Press the button. During image playback, press the button. X The functions settable with Quick Control will appear on the left of the screen. a function and set it. 2 Select Press the key to select a function.
Q Quick Control During Playback Pressing the button during the index display will switch to the single-image display and the Quick Control icons will appear. Pressing the button again will return to the index display. For images taken with another camera, selectable functions may be limited.
k Enjoying Movies Basically, you can playback movies in the following three ways: Playback on a TV set (p.191) An HDMI cable (sold separately) is necessary to connect the camera to a TV set. The TV set must also have an HDMI terminal. When the camera is connected to a TV set with an HDMI cable, you can playback movies and still photos on the TV set. If you use a High-Definition TV set to playback High-Definition (HD) movies shot with this camera, you can watch the movies in high definition.
k Enjoying Movies Playback on the Camera’s LCD Monitor (p.186-190) You can playback movies on the camera’s LCD monitor. You can also edit out the movie’s first and last scenes, and playback the images and movies in the card in an automatic slide show. A movie edited with a personal computer cannot be rewritten to the card and played back with the camera. Playback and Editing with a Personal Computer Y P O (See the PDF file instruction manual for ZoomBrowser EX/ImageBrowser, p.
k Playing Movies 1 Playback the image. Press the button to display images. a movie. 2 Select Press the key to select a movie. On the single-image display, the <1s> icon displayed on the upper left indicates a movie. On the index display, the perforation on the left edge of the image indicates a movie. As movies cannot be played on the index display, press <0> to switch to the single-image display. C Y P O the single-image display, 3 On press <0>.
k Playing Movies Function Playback Description 2 Exit Returns to the single-image display. 7 Play Pressing <0> toggles between play and stop. 8 Slow motion Adjust the slow motion speed by pressing the key. The slow-motion speed is indicated on the upper right. 5 First frame Displays the movie’s first frame. Each time you press <0>, a single previous frame 3 Previous frame is displayed. If you hold down <0>, it will rewind the movie.
X Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in 1-sec. increments. 1 On the movie playback screen, select [X]. 2 Specify the part to be edited out. X The editing screen will be displayed. Select either [U] (Cut beginning) or [V] (Cut end), then press <0>. Press the key to see the previous or next frames. Holding it down will fast forward the frames. After deciding which part to edit out, press <0>.
3 Slide Show (Auto Playback) You can playback the images in the card as an automatic slide show. 1 Number of images to be played Select [Slide show]. Under the [4] tab, select [Slide show], then press <0>. the images to be played. 2 Select Press the key to select the desired option, then press <0>. [All images/Movies/Stills] Press the key to select one of the following: [jAll images/kMovies/ zStills]. Then press <0>.
3 Slide Show (Auto Playback) [Set up] as desired. 3 SetPress the key to select [Set up], then press <0>. Set the [Display time] (still photos), [Repeat], and [Transition effect]. Then press the button. [Display time] [Repeat] [Transition effect] Y P O the slide show. 4 StartPress the key to select [Start], then press <0>. X After [Loading image...] is displayed, C the slide show will start. slide show.
Playback on a High-Definition TV An HDMI cable (sold separately) is necessary to connect the camera to a TV set. The TV set must also have an HDMI terminal. When the camera is connected to a TV set with an HDMI cable, you can playback movies and still photos on the TV set. If you use a HighDefinition TV set to playback High-Definition (HD) movies shot with this camera, you can watch the movies in high definition. 1 Connect the HDMI cable to the camera.
Playback on a High-Definition TV the button. 5 Press X The image will appear on the TV screen (Nothing will be displayed on the camera’s LCD monitor). The images will automatically be displayed at the TV’s optimum resolution. By pressing the button, you can change the display format. To playback movies, see page 186. Do not connect any other device’s output to the camera’s terminal. Doing so may cause a malfunction. Certain TVs might not be able to playback the captured images.
Playback on a High-Definition TV the camera’s button. 3 Press X An image will appear on the TV screen and you can use the TV’s remote control to playback images. an image or movie. 4 Select Point the remote control toward the TV set and press the / button to select an image. Still photo playback menu the remote control’s Enter 5 Press button. X The menu appears and you can do Movie playback menu : Return : 9-image index : Play movie : Slide show : Disp.
K Protecting Images Protecting an image prevents it from being erased accidentally. 3 Protecting a Single Image 1 Select [Protect images]. Under the [3] tab, select [Protect images], then press <0>. X The protect setting screen will appear. [Select images]. 2 Select Select [Select images], then press <0>. Image protect icon C Y P O the image. 3 Protect Press the key to select the image to be protected, then press <0>.
K Protecting Images 3 Protecting All Images in a Folder or Card You can protect all the images in a folder or card at one time. When you select [All images in folder] or [All images on card] in [3 Protect images], all the images in the folder or card will be protected. To cancel the image protection, select [Unprotect all images in folder] or [Unprotect all images on card]. C Y P O If you format the card (p.44), the protected images will also be erased. Movies can also be protected.
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.194) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a 1+73 image will erase both the 1 and 73 images. Erasing a Single Image 1 Playback the image to be erased. the button.
L Erasing Images [Select and erase images]. 2 Select Select [Select and erase images], then press <0>. X The images will be displayed. To display the three-image display, press the button. To return to the single-image display, press the button. the images to be erased. 3 Select Press the key to select the image to be erased, then press the key. X A checkmark will be displayed on the upper left. To select other images to be erased, repeat step 3. Y P 4O C Erase the images.
B Shooting Information Display Sample Image Taken in a Creative Zone Mode Protect Exposure compensation amount Rating Flash exposure compensation amount Folder number - File number Aperture Histogram (Brightness/RGB) Shutter speed Picture Style/Settings Metering mode Shooting mode ISO speed Highlight tone priority White balance Image-recording quality Playback number/ Total images recorded Eye-Fi transmission C Y P O Color space Shooting date and time White balance correction File size * Wit
B Shooting Information Display Sample Image Taken in a Basic Zone Mode Shooting mode Ambience and ambience effects Lighting or scene * For images taken in Basic Zone modes, the information displayed may differ depending on the shooting mode. * Photos taken in the mode will show [Background blur].
B Shooting Information Display About the Highlight Alert When the shooting information is displayed, any overexposed areas of the image will blink. To obtain more image detail in the overexposed areas, set the exposure compensation to a negative amount and shoot again. About the Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. The display can be switched with [4 Histogram].
Printing Images Y P O Printing (p.202) You can connect the camera directly to a printer and print out the images in the card. The camera is compatible with “wPictBridge” which is the standard for direct printing. C Digital Print Order Format (DPOF) (p.211) DPOF (Digital Print Order Format) enables you to print images recorded in the card according to your printing instructions such as the image selection, quantity to print, etc.
Preparing to Print The direct printing procedure is done entirely with the camera while you look at the LCD monitor. Connecting the Camera to a Printer 1 Set the camera’s power switch to <2>. the printer. 2 SetForupdetails, see the printer’s instruction manual. Y P O the camera to the 3 Connecting printer. Use the interface cable provided with the camera. Connect the cable to the camera’s terminal with the cable plug’s icon facing the front of the camera.
Preparing to Print wPictBridge the image. 6 Playback Press the button. X The image will appear, and the icon will appear on the upper left to indicate that the camera is connected to a printer. C Y P O Movies cannot be printed. The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. Do not use any interface cable other than the one provided. If there is a long beeping sound in step 5, it indicates a problem with the printer.
wPrinting The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s instruction manual. Printer-connected icon 1 Select the image to be printed. Check that the icon is displayed on the upper left of the LCD monitor. Press the key to select the image to be printed. <0>. 2 Press X The print setting screen will appear. Print setting screen Y P O Sets the printing effects (p.206).
wPrinting Q Setting the Paper Size Select the size of the paper loaded in the printer, then press <0>. X The paper type screen will appear. Y Setting the Paper Type Select the type of the paper loaded in the printer, then press <0>. When using a Canon printer and Canon paper, read the printer’s instruction manual to check what paper types can be used. X The page layout screen will appear. Y P O U Setting the Page Layout C Select the page layout, then press <0>.
wPrinting effects. 4 SetSettheasprinting necessary. If you need not set any printing effects, go to step 5. What is displayed on the screen differs depending on the printer. Select the option on the upper right (circled in the screenshot), then press <0>. Select the desired printing effect, then press <0>. If the icon is displayed brightly next to , you can also adjust the printing effect (p.208).
wPrinting the date and file number 5 Set imprinting. Set as necessary. Select , then press <0>. Set as desired, then press <0>. of copies. 6 SetSettheasnumber necessary. Select , then press <0>. Set the number of copies, then press <0>. Y P O printing. 7 StartSelect [Print], then press <0>. C With Easy printing, you can print another image using the same settings. Just select the image and press the button. With Easy printing, the number of copies will always be 1.
wPrinting e Adjustment of Printing Effects In step 4 on page 206, select the printing effect. When the icon is displayed brightly next to , you can press the button to adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4. Brightness The image brightness can be adjusted. Adjust levels When you select [Manual], you can change the histogram’s distribution and adjust the image’s brightness and contrast.
wPrinting Trimming the Image Tilt correction You can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again. 1 On the print setting screen, select [Trimming]. 2 Set the trimming frame size, position, and aspect ratio. Y P O The image area within the trimming frame will be printed.
wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look in the print. While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the trimming frame might not be displayed accurately. Handling Printer Errors If you resolve a printer error (no ink, no paper, etc.
W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options 1 Select [Print order]. Under the [3] tab, select [Print order], then press <0>. [Set up]. 2 Select Select [Set up], then press <0>. C3 Y P O Set the option as desired. [Print type] Set the [Print type], [Date], and [File No.].
W Digital Print Order Format (DPOF) Print type Date File number K L K L Standard Prints one image on one sheet. Index Multiple thumbnail images are printed on one sheet. Both Prints both the standard and index prints. On Off On Off [On] imprints the recorded date on the print. [On] imprints the file No. on the print. 4 Exit the setting. Press the <7> button. X The print order screen will reappear. Next, select [Sel.Image], [Byn], or [All image] to order the images to be printed.
W Digital Print Order Format (DPOF) Print Ordering Sel.Image Select and order images one by one. To display the three-image display, press the button. To return to the single-image display, press the button. After completing the print order, press the button to save the print order to the card. Quantity Total images selected Check mark Index icon [Standard] [Both] Press the key to set the number of copies to be printed for the displayed image.
W Direct Printing with DPOF With a PictBridge printer, you can easily print images with DPOF. 1 Prepare to print. See page 202. Follow the “Connecting the Camera to a Printer” procedure up to step 5. 2 Under the [3] tab, select [Print order]. 3 Select [Print]. Y P O [Print] will be displayed only if the camera is connected to a printer and printing is possible. 4 Set the [Paper settings] (p.204). Set the printing effects (p.206) if necessary. 5 Select [OK].
Customizing the Camera Y P O C Cre at iv You can customize various camera features to suit your picture-taking preferences with Custom Functions. Custom Functions can be set and used only in Creative Zone modes.
3 Setting Custom FunctionsN 1 Custom Function No. Select [Custom Functions (C.Fn)]. Under the [7] tab, select [Custom Functions (C.Fn)], then press <0>. the Custom Function No. 2 Select Press the key to select the Custom Function No., then press <0>. Y P O the setting as desired. 3 Change Press the key to select the C setting (number), then press <0>. Repeat steps 2 and 3 if you want to set other Custom Functions.
3 Setting Custom FunctionsN Custom Functions C.Fn I: Exposure A LV shooting 1 Exposure level increments 2 Flash sync. speed in Av mode p.218 k k C.Fn II: Image 3 Long exposure noise reduction 4 High ISO speed noise reduction 5 Highlight tone priority p.220 C.Fn III: Autofocus/Drive 6 p.219 AF-assist beam firing Y P O p.
3 Custom Function SettingsN Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn IV: Operation/Others. C.Fn I: Exposure C.Fn-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. Effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.
3 Custom Function SettingsN C.Fn II: Image C.Fn-3 Long exposure noise reduction 0: Off 1: Auto For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases. 2: On Noise reduction is performed for all exposures of 1 sec. or longer. The [On] setting may be effective for noise that cannot be detected or reduced with the [Auto] setting.
3 Custom Function SettingsN With setting 2, the continuous shooting speed will be slower (with the image-recording quality set to JPEG or 1+73). The maximum burst during continuous shooting will also decrease (with the image-recording quality set to JPEG or 1). If you playback a 1 or 1+73 image with the camera or print an image directly, the effect of the high ISO speed noise reduction may look minimal.
3 Custom Function SettingsN 2: Enable external flash only If an external Speedlite is attached, it will emit the AF-assist beam when necessary. The camera’s built-in flash will not fire the AF-assist beam. 3: IR AF assist beam only Among external Speedlites, only those which have an infrared AF-assist beam will be able to emit the beam. This prevents any Speedlite which uses a series of small flashes (like the built-in flash) from firing the AFassist beam.
3 Custom Function SettingsN C.Fn-8 Assign SET button You can assign a frequently-used function to <0>. Press <0> when the camera is ready to shoot. 0: Normal (disabled) 1: Image quality Press <0> to display the image-recording quality setting screen on the LCD monitor. Select the desired image-recording quality, then press <0>. 2: Flash exposure compensation When you press <0>, the flash exposure compensation setting screen will appear. Set the flash exposure compensation, then press <0>.
3 Custom Function SettingsN C.Fn-10 LCD display when power ON 0: Display on When the power switch is turned on, the shooting settings will be displayed (p.46). 1: Previous display status If you pressed the button and turned off the camera while the LCD monitor was off, the shooting settings will not be displayed when you turn on the camera again. This helps to save battery power. The menu screens and image playback will still be displayed when used.
3 Registering My MenuN Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. 1 Select [My Menu settings]. Under the [9] tab, select [My Menu settings], then press <0>. [Register to My Menu]. 2 Select Select [Register to My Menu], then press <0>. the desired items. 3 Register Select the item to be registered, then press <0>. On the confirmation dialog, select [OK] and press <0> to register the item. You can register up to six items.
Reference Y P O This chapter provides reference information for camera features, system accessories, etc.
External Speedlites EOS-dedicated, EX-series Speedlites Basically operates like a built-in flash for easy operation. When an EX-series Speedlite (sold separately) is attached to the camera, almost all the autoflash control is done by the camera. In other words, it is like a high-output flash attached externally in place of the built-in flash. For detailed instructions, see the EX-series Speedlite’s instruction manual. This camera is a Type-A camera that can use all the features of EX-series Speedlites.
External Speedlites Canon Speedlites other than the EX-series With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL autoflash mode, the flash can be fired at full output only. Set the camera’s shooting mode to (manual exposure) or (aperture-priority AE) and adjust the aperture setting before shooting. If you are using a Speedlite which has manual flash mode, shoot in the manual flash mode.
Using a Household Power Outlet With the AC Adapter Kit ACK-E10 (sold separately), you can connect the camera to a household power outlet and not worry about the remaining battery level. 1 Connect the power cord. Connect the power cord as shown in the illustration. After using the camera, unplug the power plug from the power outlet. the DC Coupler. 2 Connect Connect the cord’s plug to the DC Coupler. Y P O the DC Coupler.
F Using the Remote Switch Remote Switch RS-60E3 (sold separately) comes with an approx. 60cm/2.0ft cord. When connected to the camera’s remote control terminal, Remote Switch RS-60E3 can be used to press the shutter button halfway and completely. Remote Controller RC-6, RC-1, and RC-5 (all sold separately) cannot be used with the camera.
Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or inquire the card’s manufacturer.
Using Eye-Fi Cards the [Access point SSID:]. 5 Check Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the button three times to exit the menu. the picture. 6 Take X The picture is transferred and the icon switches from gray (Not connected) to one of the icons below. For transferred images, O is displayed in the shooting information display (p.198).
Function Availability Table According to Shooting Modes o: Set automatically k: User selectable Basic Zone Mode Dial All recording quality settings selectable : Not selectable Creative Zone 1 7 C 2 3 4 5 6 d sf a 8 k*1 k k k k k k k k k k k k k Auto / ISO Auto o o o o o o o o k k k k k Manual k k k k k Settable maximum ISO speed limit k k k k k Automatic setting P P P Q R P P P Picture Style Manual selection k k k k k k o o o o o o o o k k k k k k k k k k k k k k k k k k k k k k
Function Availability Table According to Shooting Modes Basic Zone Mode Dial Creative Zone 1 7 C 2 3 4 5 6 d sf a 8 o o o o o o o o k k k k k selection k k k k k Program shift k Exposure compensation k k k k k k k k k k k k k Metering Evaluative Metering mode mode Exposure AEB AE lock Depth-of-field preview k k k (C.Fn-8-5) Single shooting k k k k k k k k k k k k k k k k j (10 sec.) k k k k k k k k k k k k k l (2 sec.
3 Menu Settings For Viewfinder Shooting and Live View Shooting 1 Shooting 1 (Red) Page Quality 73 / 83 / 74 / 84 / 7a / 8a / b / c / 1+73 / 1 74 Beep Enable / Disable 154 Release shutter without card Enable / Disable 154 Image review Off / 2 sec. / 4 sec. / 8 sec. / Hold 154 Peripheral illumination Enable / Disable correction 108 Red-eye reduction Disable / Enable 89 Flash control Flash firing / Built-in flash function setting / External flash function setting / External flash C.
3 Menu Settings y Shooting 3 (Red) Page Dust Delete Data Obtains data to be used to erase dust spots 171 ISO Auto Max. 400 / Max. 800 / Max. 1600 / Max. 3200 / Max. 6400 78 Live View shooting Enable / Disable 123 AF mode Live mode / u Live mode / Quick mode 128 Grid display Off / Grid 1l / Grid 2m 127 Metering timer 4 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / 30 min.
3 Menu Settings 5 Set-up 1 (Yellow) Page Auto power off 30 sec. / 1 min. / 2 min. / 4 min. / 8 min. / 15 min.
3 Menu Settings k For Movie Shooting w Movie 1 (Red) Page AF mode Live mode / u Live mode / Quick mode 145 AF with shutter button during k Disable / Enable 145 kShutter/AE lock button AF/AE lock / AE lock/AF / AF/AF lock, no AE lock / AE/AF, no AE lock 146 kHighlight tone priority Disable / Enable 146 Movie recording size 1280x720 6 / 1280x720 5 147 Sound recording On / Off 148 Metering timer 4 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / 30 min.
3 Menu Settings 1 Shooting 1 (Red) Beep Page Enable / Disable 154 Peripheral illumination Enable / Disable correction 108 3 Playback 1 (Blue) Protect images Select images / All images in folder / Unprotect all images in folder / All images on card / Unprotect all images on card 194 Rotate Rotate vertical images 179 Erase images Select and erase images / All images in folder / All images on card 196 Print order Specify images to be printed (DPOF) 211 4 Playback 2 (Blue) Y P O Histogram
3 Menu Settings 5 Set-up 1 (Yellow) Page Auto power off 30 sec. / 1 min. / 2 min. / 4 min. / 8 min. / 15 min. / Off 155 Auto rotate OnPD / OnD / Off 162 Format Initialize and erase data on the card 44 File numbering Continuous / Auto reset / Manual reset 158 Select folder Create and select a folder 156 Eye-Fi settings* Eye-Fi transmission: Disable / Enable Connection information 230 * Displayed only when an Eye-Fi card is used.
System Map ST-E2 270EX II Eyepiece Extender EP-EX15ll 320EX 430EX II 580EX II Macro Ring Lite Macro Twin Lite MR-14EX MT-24EX Bundled Accessories Eyecup Ef Rubber Frame Ef E-series Dioptric Adjustment Lenses Wide Strap EW-200D C Y P O Angle Finder C AC Adapter Kit ACK-E10 Hand Strap E2 Battery Pack LP-E10 Battery Charger LC-E10 or LC-E10E DC Coupler DR-E10 Semi Hard Case EH19-L 240 Compact Power Adapter CA-PS700
System Map Remote Switch RS-60E3 EF lenses EF-S lenses HDMI Cable HTC-100 (2.9 m/9.5 ft.) Camera Instruction Manual C EOS DIGITAL Solution Disk Y P O TV/Video Software Instruction Manual PictBridge-compatible printer Interface Cable (1.3 m/4.3 ft.) Interface Cable IFC-200U/500U (1.9 m/6.2 ft.) / (4.7 m/15.4 ft.) SD/SDHC/SDXC memory card Computer USB port Windows 7 Windows Vista Windows XP Mac OS X Card reader Card slot * The length of all cables is approx. **m/**ft.
Troubleshooting Guide If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery pack does not recharge. Do not recharge any battery pack other than a genuine Canon Battery Pack LP-E10. The battery charger’s lamp blinks.
Troubleshooting Guide If you use Live View shooting or shoot movies for a prolonged period (p.121, 139), the number of possible shots will decrease. If you hold down the shutter button for a long time or often use only the AF without taking pictures, the number of possible shots will decrease. If you often use the LCD monitor, the number of possible shots will decrease. If you use the lens Image Stabilizer, the number of possible shots will decrease. The camera turns off by itself.
Troubleshooting Guide The file numbering does not start from 0001. If the card already contains recorded images, the image number might not start from 0001 (p.158). The image is out of focus. Set the lens focus mode switch to (p.35). To prevent camera shake, press the shutter button gently (p.38, 39). If the lens has an Image Stabilizer, set the IS switch to <1>. In low light, the shutter speed may become slow. Use a faster shutter speed (p.92), set a higher ISO speed (p.77), use flash (p.
Troubleshooting Guide The Auto Lighting Optimizer cannot be set. Under the [7 Custom Functions (C.Fn)] menu, if [5: Highlight tone priority] is set to [1: Enable], the Auto Lighting Optimizer cannot be set. If [0: Disable] is set, the Auto Lighting Optimizer can be set (p.107). When I use the mode with flash, the shutter speed becomes slow.
Troubleshooting Guide High-speed sync cannot be set in the mode. Under [7 Custom Functions (C.Fn)], set [2: Flash sync. speed in Av mode] to [0: Auto] (p.218). The camera makes a noise when it is shaken. The built-in flash’s pop-up mechanism moves slightly. This is normal. The shutter makes two shooting sounds during Live View shooting. If you use flash, the shutter will make two sounds each time you shoot (p.123). During Live View shooting and movie shooting, the E icon appears.
Troubleshooting Guide Playback Problems The LCD monitor does not display a clear image. If the LCD monitor is dirty, use a soft cloth to clean it. In low or high temperatures, the LCD monitor display may seem slow or might look black. It will return to normal at room temperature. Part of the image blinks in black. It is the highlight alert (p.200). Overexposed highlight areas with a loss of highlight detail will blink. The image cannot be erased.
Troubleshooting Guide I cannot connect the camera to my TV set. An HDMI cable (sold separately) is necessary to connect the camera to a TV set. Using the HDMI Cable HTC-100 (sold separately) is recommended (p.191). Also check that your TV set has an HDMI IN terminal. If the TV set does not have an HDMI IN terminal and has only an A/V IN jack, the camera cannot be connected. No image appears on the TV screen. Make sure the HDMI cable’s plug is inserted all the way in (p.191).
Troubleshooting Guide The file name starts with “MVI_”. It is a movie file (p.159). The shooting date and time displayed is incorrect. The correct date and time has not been set (p.33). The date and time is not in the picture. The shooting date and time does not appear in the picture. The date and time is instead recorded in the image data as shooting information. When printing, you can imprint the date and time in the picture by using the date and time recorded in the shooting information (p.207).
Error Codes Error No. If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Countermeasures No. 01 02 Error Message & Solution Communications between the camera and lens is faulty. Clean the lens contacts. Y P O Î Clean the electrical contacts on the camera and lens and use a Canon lens (p.15, 18). Card cannot be accessed. Reinsert/change card or format card with camera. C Î Remove and insert the card again, replace the card, or format the card (p.
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash SD memory card, SDHC memory card, SDXC memory card Approx. 22.0 x 14.7mm Canon EF lenses (including EF-S lenses) (35mm-equivalent focal length is approx. 1.6 times the lens focal length) Canon EF mount • Image Sensor Type: Effective pixels: Aspect ratio: Dust delete function: CMOS sensor Approx. 12.
Specifications Automatic image brightness correction: Highlight tone priority: Lens peripheral illumination correction: Auto Lighting Optimizer Provided Provided • Viewfinder Type: Coverage: Magnification: Eye point: Built-in dioptric adjustment: Focusing screen: Mirror: Depth-of-field preview: Eye-level pentamirror Vertical/Horizontal approx. 95% (with Eye point approx. 21 mm) Approx. 0.8x (-1 m-1 with 50mm lens at infinity) Approx. 21 mm (From eyepiece lens center at -1 m-1) Approx. -2.5 - +0.
Specifications AE lock: Auto:Applied in One-Shot AF mode with evaluative metering when focus is achieved Manual: By AE lock button • Shutter Type: Shutter speeds: Electronically-controlled, focal-plane shutter 1/4000 sec. to 1/60 sec. (Full Auto mode), X-sync at 1/200 sec. 1/4000 sec. to 30 sec., bulb (Total shutter speed range. Available range varies by shooting mode.
Specifications • Live View Shooting Focusing: Metering modes: Metering range: Grid display: Live mode, Face detection Live mode (Contrast detection) Quick mode (Phase-difference detection), Manual focusing (Approx. 5x / 10x magnification possible) Evaluative metering with the image sensor EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100) Two types • Movie Shooting Movie compression: MPEG-4 AVC/H.
Specifications • Playback Image display formats: Basic info, basic info + image quality/playback number, shooting info. display, histogram, 4-image index, 9-image index, image rotate possible Zoom magnification: Approx. 1.
Specifications • Operation Environment Working temperature range: 0°C - 40°C / 32°F - 104°F Working humidity: 85% or less • Battery Pack LP-E10 Type: Rated voltage: Battery capacity: Working temperature range: Rechargeable lithium-ion battery 7.4 V DC 860 mAh During charging: 6°C - 40°C / 43°F - 104°F During shooting: 0°C - 40°C / 32°F - 104°F Working humidity: 85% or less Dimensions (W x H x D): Approx. 36.2 x 14.7 x 49.0 mm / 1.4 x 0.6 x 1.9 in. Weight: Approx. 45 g / 1.6 oz.
Specifications Max. magnification: Field of view: 0.34x (at 55 mm) 207 x 134 - 67 x 45 mm / 8.1 x 5.3 - 2.6 x 1.8 in. (at 0.25 m / 0.82 ft.) Image Stabilizer: Lens shift type Filter size: 58 mm Lens cap: E-58 Max. diameter x length: Approx. 68.5 x 70.0 mm / 2.7 x 2.8 in. Weight: Approx. 200 g / 7.1 oz. Hood: EW-60C (sold separately) Case: LP814 (sold separately) • EF-S18-55mm f/3.5-5.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc. in the United States and other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Multimedia Interface are a trademark or registered trademark of HDMI Licensing LLC.
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries. - Do not short-circuit, disassemble, or modify the battery pack or back-up battery.
• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. • Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision. • Keep the camera from the reach of small children. The neck strap can accidentally choke the child.
MEMO C Y P O 261
MEMO C 262 Y P O
MEMO C Y P O 263
MEMO C 264 Y P O
MEMO C Y P O 265
MEMO C 266 Y P O
MEMO C Y P O 267
MEMO C 268 Y P O
Software Start Guide Y P O This chapter gives an overview of the software in the EOS DIGITAL Solution Disk (CD-ROM) provided with the camera and explains how to install the software in a personal computer. It also explains how to view the pdf files in the Software Instruction Manual CD-ROM.
Software Start Guide EOS DIGITAL Solution Disk This disk contains various software for EOS DIGITAL cameras. EOS Utility With the camera connected to a personal computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer. You can also use the personal computer to set various camera settings and shoot remotely with the computer connected to the camera. Digital Photo Professional Y P O This software is recommended for users who mainly shoot RAW images.
Software Start Guide Installing the Software Do not connect the camera to your computer before you install the software. The software will not be installed correctly. Even if a previous version of the software is installed, install the software by following the steps below (the newer version will overwrite the previous version). 1 Insert EOS DIGITAL Solution Disk (CD-ROM). For Macintosh, double-click to open the CD-ROM icon displayed on the desktop, then double-click on [Canon EOS Digital Installer].
Software Start Guide Software Instruction Manual Contains the Software Instruction Manuals. Copying and Viewing the Instruction Manual PDFs 1 Insert the [Software INSTRUCTION MANUAL] CD-ROM into your computer. 2 Double-click the CD-ROM icon. For Windows, the icon is displayed in [(My) Computer]. For Macintosh, the icon is displayed on the desktop. 3 Copy the [English] folder to your computer. Y P O Instruction Manual PDFs with the names below are copied.
Quick Reference Guide and Instruction Manual Index Y P O Menu Operations - - - - - - - - - - - - - - - - - - - - Image-recording Quality - - - - - - - - - - - - - - - A Picture Style- - - - - - - - - - - - - - - - - - - - Q Quick Control - - - - - - - - - - - - - - - - - - - - Nomenclature - - - - - - - - - - - - - - - - - - - - - - Basic Zone Modes - - - - - - - - - - - - - - - - - - - r Using the Built-in Flash - - - - - - - - - - - - - - Creative Zone Modes - - - - - - - - - - - - - - - - - d: Program
Quick Reference Guide Menu Operations <0> button LCD monitor Cross keys button 1. Press the button to display the menu. 2. Press the key to select a tab, then press the key to select the desired item. 3. Press <0> to display the setting. 4. After setting the item, press <0>.
Quick Reference Guide Image-recording Quality Select [1 Quality], then press <0>. Press the key to select the quality, then press <0>. Image-recording quality Recorded pixels Possible shots Y P O A Picture StyleN Select [2 Picture Style], then press <0>. Press the key to select the Picture Style, then press <0>. C Style Description P Standard Q Portrait R Landscape V Monochrome Vivid colors and sharp images. Nice skin tones and slightly sharp images.
Quick Reference Guide Q Quick Control Press the button. The Quick Control screen will appear. Creative Zone Modes Basic Zone Modes Shutter speed Shooting mode Exposure compensation/ AEB setting Picture Style AF mode White balance Drive mode C Y P O Aperture Highlight tone priority ISO speed Flash exposure compensation Auto Lighting Optimizer Raise built-in flash Image-recording quality Metering mode In Basic Zone modes, the settable functions differ depending on the shooting mode.
Quick Reference Guide Nomenclature Power switch Mode Dial Flash button <6> Main Dial Shutter button Y P O Focus mode switch C Aperture/Exposure compensation button AE lock button AF point selection button Cross keys Access lamp Live View shooting/ Movie shooting button <0> Setting button 277
Quick Reference Guide Shooting Settings Display Shutter speed Aperture ISO speed Shooting mode Exposure level indicator White balance Auto Lighting Optimizer Raise built-in flash Picture Style AF mode Image-recording quality Quick Control icon Possible shots Metering mode Battery check zxcn OK NG Y P O Drive mode C Viewfinder Information AF point activation indicator <•> AF points Focus confirmation light AE lock Flash-ready Flash exposure compensation Shutter speed Aperture 278 Max.
Quick Reference Guide Basic Zone Modes Ba sic Zone All the settings necessary for shooting are set automatically. You just press the shutter button, and the camera does the rest. 1 Full Auto 3 Landscape 7 Flash Off 4 Close-up C Creative Auto 5 Sports 2 Portrait 6 Night Portrait Pressing the button will display the Quick Control screen. In the C/2/3/4/5/6 shooting mode, press the key to select the function, then press the key or turn the <6> dial to set it as desired.
Quick Reference Guide Cre ati v Creative Zone Modes e ne Zo You can change the camera settings as desired to shoot in various ways. d: Program AE The camera automatically sets the shutter speed and aperture in the same way as the <1> mode. Set the Mode Dial to . Y P O s: Shutter-priority AE Set the Mode Dial to . Turn the <6> dial to set the desired shutter speed, then focus the subject. The aperture will be set automatically.
Quick Reference Guide E: AF ModeN Set the lens focus mode switch to . Press the button. Press the key or turn the <6> dial to select the AF mode, then press <0>. S AF PointN X(One-Shot AF): For still subjects 9(AI Focus AF): Switches the AF mode automatically Z(AI Servo AF): For moving subjects Y P O Press the button. C Press the key to select the AF point.
Quick Reference Guide Z: ISO SpeedN Press the button. Press the key or turn the <6> dial to select the ISO speed, then press <0>. When [AUTO] is selected, the ISO speed is set automatically. When you press the shutter button halfway, the ISO speed setting will be displayed. i Drive ModeN Y P O Press the button. Press the key or turn the <6> dial to select the drive mode, then press <0>.
Quick Reference Guide A Live View Shooting Press the button to display the Live View image. Press the shutter button halfway to focus. Y P O Press the shutter button completely to take the picture. C Live View shooting settings will appear under the [2] menu tab in Basic Zone modes and under the [z] menu tab in Creative Zone modes. Battery Life with Live View Shooting Temperature At 23°C / 73°F No Flash Approx. 240 shots 50% Flash Use Approx.
Quick Reference Guide k Shooting Movies Set the Mode Dial to . Press the shutter button halfway to focus. (In the mode, you cannot take still photos even if you press the shutter button completely.) Press the button to start shooting a movie. Y P O To stop movie shooting, press the button again.
Quick Reference Guide Image Playback y u y Index u Magnify Select image C Y P O B Shooting information L Erase S x Playback 285
Index 10-sec. or 2-sec. delay ...................87 Beeper.......................................... 154 1280x720 ......................................147 Black-and-white image..... 64, 80, 112 1st-curtain sync.............................169 Bracketing ............................ 103, 118 2nd-curtain sync ...........................169 Brightness (exposure) .................. 101 Adjust (exposure compensation) ........ 101 Auto exposure bracketing (AEB) ...............................
Index Color temperature .........................115 Color tone .....................................111 Continuous....................................158 Continuous shooting .......................86 Contrast ........................................111 Copyright information....................160 Creative Auto ..................................55 M icon..............................................4 Creative Zone modes......................22 Custom Functions .........................216 Custom WB........
Index Protect ..................................... 194 Review time ............................. 154 Shooting information................ 198 Transfer.................................... 230 View on TV ...................... 184, 191 Out of focus ............37, 38, 85, 132 Recompose ................................52 Folder Create/Select.....................156 Format (card initialization) ..............44 Frame rate ....................................147 Full Auto......................................
Index Live View shooting ........................121 Face detection Live mode (AF)...129 Grid display...............................127 Information display ...................124 Live mode (AF) .........................128 Manual focusing .................85, 135 Metering timer...........................127 Possible shots ..........................123 Quick Control............................126 Quick mode (AF) ......................133 Long exposure noise reduction.....219 Long exposures .................
Index Partial metering.............................100 Recharge........................................ 26 Peripheral illumination correction ....108 Red-eye reduction.......................... 89 Personal white balance.................116 Release shutter without card........ 154 PictBridge .....................................201 Remote switch.............................. 229 Picture Style....................79, 110, 113 Revert to default settings ............. 164 Pixels ......................
Index 6 (Night Portrait) .......................62 k (Movie shooting).................139 Shooting settings display ..........20, 46 Shutter button .................................39 Shutter sync. .................................169 Shutter-priority AE...........................92 Single image display .......................70 Single shooting .......................57, 233 W WB (White balance) ..................... 115 White balance............................... 115 Bracketing .........................
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.