User Manual • Please read this manual before operating this scanner. • After you finish reading this manual, store it in a safe place for future reference.
FCC REGULATIONS (For 120 V model) RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 120 V models) Document Scanner, Model M111121 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Für EMVG Copyright Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts-und Gewerbebereich sowie in Kleinbetrieben vorgesehen. Copyright 2011 by CANON ELECTRONICS INC. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of CANON ELECTRONICS INC.
Setup Guide STEP 1 Please read first. Checking the Accessories If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative. Scanner USB Cable Type A/Type B (Length: 1.8 m) AC Adapter/Power Cord (Connected length: 2.6 m) A V va A or nt l’ P nte dem uti Vo rima s d Ge lisa e or b ti ge dell la u rau on bru ’us tili ch ik o zac ión Reference Guide Before Use (Europe only) Setup Disc Warranty Card (U.S.A.
Setup Disc Contents Third-Party Software Install the following software necessary for using the scanner from the supplied Setup Disc. • CaptureOnTouch This is a dedicated scanning application for this product. • CapturePerfect 3.1 This is a scanning application for the DR series scanner. • Scanner Driver This is the scanner driver for this product. The following software applications are also included on the supplied Setup Disc. For details on installing these applications, refer to the Readme.txt file.
STEP 2 Installing the Software System requirements • Scanning speeds are lower if your computer's standard USB interface is USB Full-Speed (equal to USB 1.1.) • The USB cable you are using should be the one originally included with the scanner. • If the CPU, memory, interface card, and other specifications do not satisfy the installation requirements, the scanning speed may be greatly reduced and transmission may take a long time.
Software Installation 2 Click [Typical Installation]. IMPORTANT • Install the software before connecting the scanner to the computer. • Log on to Windows as an Administrator. • Close all other applications before installing the software. 1 Insert the software setup disc into the disk drive of the computer. The setup menu automatically starts up when you insert the disc into the drive. (If the menu does not start up, execute setup.exe from the disc.
4 5 Click [Next]. Read the license agreement, and click [I accept the terms in the license agreement] and then [Next] if you agree to it. 8 6 Click [Install]. 7 When the driver installation is complete, click [Finish]. 8 Click [Next].
12 When CaptureOnTouch installation is complete, click Read the license agreement, and click [Yes] to accept it. [Finish]. 10 Click [Next]. 13 Click [Next]. 11 Specify whether to install the plug-in for Microsoft SharePoint, and click [Next].
14 Read the license agreement, and click [I accept the terms 16 Specify whether to install the plug-in for Microsoft in the license agreement] and then [Next] if you agree to it. SharePoint, and click [Next]. 17 When CapturePerfect installation is complete, click 15 Click [Next]. [Finish].
18 Select the language you want to use, and click [Next]. 21 Click [Exit] to finish installing the software. 19 Click [Next]. 20 When the User Manual installation is complete, click [Finish].
STEP 3 Connecting to a Computer Connect the scanner to the computer and the power supply. IMPORTANT • Do not connect the scanner to the computer before installing the software. • Before connecting the scanner to the computer, verify that the power of the scanner is OFF. If the power is ON, turn it OFF.
STEP 4 Turning the Power ON The power of the scanner can be turned ON and OFF with the power button on the front of the scanner. 1 2 When the scanner is properly connected to the computer, the (CaptureOnTouch) icon appears on the taskbar as follows. Make sure that the scanner and computer are connected properly. If the taskbar icon appears as , the scanner is not properly connected to the computer. Check the status of the power switch and USB cable. Press the power button.
Introduction Thank you for purchasing the Canon imageFORMULA DR-M140 Document Scanner. Please read the following manuals carefully and familiarize yourself with the functions of the scanner before use to ensure you sufficiently understand the functions and make the most of the scanner’s capabilities. After reading the manuals, store them in a safe place for future reference.
Table of Contents Setup Guide ......................................................................... 4 Introduction ....................................................................... 14 Scanning with CapturePerfect .................................... 48 Symbols Used in This Manual.................................................... 14 Setting the Scanner Driver .......................................... 50 Before Using the Scanner..........................
Before Using the Scanner Important Safety Instructions ● Avoid locations that are subject to vibration. ● Avoid exposing the scanner to rapid changes in temperature. If the room in which the scanner is installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner. This may result in a noticeable degradation in scanning quality. The following conditions are recommended for optimal scanning quality: Room temperature: 10 °C to 32.5 °C (50 °F to 90.
● Never try to take the AC adapter apart or modify it in any way, as this is dangerous. ● Do not use flammable spray near the scanner. ● When cleaning the scanner, push the power button to turn it OFF and disconnect the power cord from the power supply. ● Clean the scanner using a slightly dampened cloth which has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances.
● Do not place objects on top of the scanner. Such objects may tip or fall over, resulting in personal injury. ● Connect only to a power outlet of the rated voltage and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region). Doing so might cause a fire or electric shock. ● When unplugging the power cord, grasp it firmly by its plug. Do not pull directly on the power cord, as this may damage or expose the cord's internal wiring, resulting in a fire or electric shock.
Features of the Scanner ● Full Auto Mode A Full Auto Mode is provided in the supplied software, CaptureOnTouch, to allow scanning under automatically determined conditions. Scanning conditions such as the color mode and page size are set automatically based on the document being scanned. ● Auto Resolution Detection When enabled in the CaptureOnTouch or scanner driver settings, this function detects the content of documents and determines the scanning resolution automatically.
● Prescan Function The scanner is equipped with a Prescan function that allows you to adjust the contrast and brightness of a prescanned image and then send the adjusted image to the application software, without needing to scan the document again. ● Character/Line Emphasis Function If characters and lines in scanned images are not clearly visible, you can use this function to adjust their thickness during scanning.
Names and Functions of Parts Front View (With the Feed Tray Open) A 1 2 B C 3 H7 I7 4 D E 5 A OPEN Lever F G6 J7 G Operating Panel Raise this to open the upper unit. A range of scanning operations can be performed with this, such as starting and stopping scans, executing registered jobs, and cancelling double feed detection. (See p. 22) B Document Eject Extension Support Open this when scanning documents longer than 150 mm in length. H Power button Press this to turn on the scanner.
I Feed Selection Lever Operating Panel Use this to change the way documents are fed. Set the lever to the lower position when scanning documents consecutively. (See p. 26) Set the lever to the upper position when scanning documents one page at a time or scanning multi-page documents that are fastened together. (See p. 26) A 1 2 B C 3 D E 4 J LED Indicator (Orange) This lights during non separation feeding mode. Back View A Job No.
Displayed Error Codes When a scanning error occurs, the following error codes are displayed in the Job No. Indicator. : displayed when the upper unit is open. : displayed when a paper jam is detected. : displayed when a double feed is detected while scanning. : displayed when a skewed document is detected. : displayed for other errors. Other Displays When the straight path tray is opened or closed, the eject method is displayed in the Job No. Indicator. : flashes during straight path mode.
Basic Operation Documents The scanner can scan documents ranging in size from business cards to LTR/A4. The document sizes that this scanner can scan are shown below. IMPORTANT The documents to be scanned must satisfy certain criteria. Read the following items carefully. Plain Paper Size Width: 50.8 mm to 216 mm (2" to 8.5") Length: 54 mm to 356 mm (2.12" to 14") (You can scan documents up to 3,000 mm (118.1") long by setting the scanner to the Long Document mode.
• Laminated documents may not be scanned correctly, depending on the document. • It is recommended that thin documents be fed one page at a time. • Scanning the following types of documents can cause a paper jam or malfunction. To scan such a document, make a photocopy of the document and then scan the photocopy. There are creases or fold lines. Carbon paper There are curls. The surface is coated. There are tears. Extremely thin document such as semi-transparent thin paper. There are clips or staples.
How to Place Documents Standard feeding is used to feed documents one page at a time. Non separation feeding is used to feed bound or fastened multi-page documents or folded documents without separating them. Switching the Feed and Eject Methods Feed and Eject Methods for Different Document Types Switch the feed and eject methods based on the type of document you are scanning.
3 Placing Documents 1 Ordinarily, you should scan with the straight path tray at the rear of the scanner closed (U-turn path). When scanning business cards, plastic cards, or other documents you do not want to bend, open the straight path tray (straight path). For details on the eject methods for each document type, see p. 26. Switch the feed method based on the type of document you are scanning.
5 6 • Before you place a document, check to make sure it does not contain paper clips, staples, or other small metal objects. These items may cause a fire or electrical shock, damage the document, or cause a paper jam or scanner malfunction. • Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it, as this may result in personal injury. Be extra careful of neckties and long hair.
Placing Cards 1 2 3 Placing Folded Documents Open the document feed tray. Folio Scan enables you to scan documents that are larger than LTR/ A4 and therefore do not fit in the feeder. (The maximum size is 11" X 17"/A3.) To use the function, fold the document in half lengthwise and place it into the feeder. The DR-M140 will scan both sides and combine the scanned images into a single image. Open the straight path tray. 1 Set the feed selection lever to the standard feeding position (lower position).
4 Setting the Long Document Mode Place the document with the folded edge facing right and the top edge facing downward. The length of documents that can be scanned with the scanner is normally 356 mm (14"), but you can scan documents up to 3,000 mm (118.1") long by setting the scanner to the Long Document mode. After placing the document, align the document guides with both edges of the document.
2 4 Click the Start button, and then click [All Programs], [Canon DR-M140], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. 3 Click the [Maintenance] tab, and then select a Long Document mode. Select [Long Document Mode (1000 mm)] or [Long Document Mode (3000 mm)] depending on the length of the document. Click [CANON DR-M140 USB] and click [Properties]. Scanner properties are displayed. 5 Click [OK].
2 3 4 6 7 The settings screen for the scanner driver appears. (See p. 50) Click the [Feeding] tab. Click the [OK] button and close the settings screen. Place the document as described in the “Placing Documents” procedure on p. 27. What to do when a double feed is detected Select either the [Detect by Length] or the [Detect by Ultrasonic] check box (or both).
When using the double feed detection ignore function If a document double feed is detected during scanning, document feeding stops when the double fed documents are ejected. The following error code is displayed in the Job No. Indicator of the operating panel, and the DFR button lights.
4 When a skewed document is detected Select the [Skew Detection] check box. Feeding automatically stops when a skewed document is detected during scanning. The following error code is also displayed in the Job No. Indicator of the operating panel. Skew detection error code 5 6 Click the [OK] button to close the settings screen. Also, a message screen is displayed to notify you that a skewed document has been detected. Place the document as described in “Placing Documents” (see p. 27).
Scanning methods Scanning with CaptureOnTouch Operating the scanner with the operating panel buttons What is CaptureOnTouch? You can start scanning by selecting a job from the scanner’s operating panel. CaptureOnTouch is a scanning application that allows you to scan a document with a simple operation by following the instructions on the screen. Save to folder Save the file to a specified folder.
Exiting CaptureOnTouch Scan First Click at the top of the window to close the CaptureOnTouch main window. When doing so, the main window closes but CaptureOnTouch is kept as resident in the system. To stop CaptureOnTouch being resident in the system, click the (CaptureOnTouchiconj in the taskbar, and select [Exit] from the menu. Scan a document and then select the output method. This method allows you to easily scan a document by just following the instructions on the screen.
3 IMPORTANT Set the scan method in the top screen. If you configure scanning conditions that consume a large amount of the computer's memory, scanning may stop because of insufficient memory. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions, and then try scanning again. A B Hint If a document is scanned when [Enable continuous scanning] is set to [ON], the Continuous Scanning screen (see p.
5 Select Scan Job Configure the settings related to output and then output the scanned images. Register scanning settings from the scanning conditions to the output method as jobs, and then scan a document by just selecting the job that suits your purpose. This method is convenient when you want to repeat scanning using a set procedure. Operation Flow A Register the job ▼ B Select the job ▼ Scan the document ▼ A Configure the settings related to output. (See p.
2 4 Enter the job name, and press the Enter key. Click [Output settings], and configure the output settings. The output setting items differ depending on the specified output method. For details on the setting items, see the Help of CaptureOnTouch. Hint Job numbers up to 9 are added (in numerical order) to the end of the set job name. By specifying the job number with the operating panel, you can start scanning after pressing the operating panel button. (See p.
Hint IMPORTANT • If you set [Enable continuous scanning] to [ON], you can continue to scan additional documents after all the pages of the initial document are scanned. • If you set [Check output after scanning] to [ON], you can check the output settings after scanning. 3 If you configure scanning conditions that consume a large amount of the computer's memory, scanning may stop because of insufficient memory.
When [Check output after scanning] is set to [ON] Operating the scanner with the operating panel buttons The Output Confirmation screen appears before the scanned images are output. Change the settings for the output method if necessary and then click the output button. The name of the output button differs for each selected output method. You can start scanning by selecting a job from the scanner’s operating panel. 1 2 3 Set a job number every time a job is registered with CaptureOnTouch.
Setting Basic Items Scanner Settings Scanner settings include the basic items that are configured in [Scanner Setting], and the setting items that are configured in the advanced settings dialog box. The settings in the advanced settings dialog box are applied for settings other than the basic items. The settings in the driver settings dialog box are applied for any other settings.
Operation in Continuous Scanning Screen Use advanced settings dialog box Configure scanner settings other than the basic items in the advanced settings dialog box (scanner driver). To open the scanner driver, select [ON] and then click the button. If a document is scanned with either Scan First or Select Scan Job when [Enable continuous scanning] is set to [ON] in the Start screen, the Continuous Scanning screen appears when all of the pages of the placed document have been fed.
C Preview Controls Control the preview images and cancel or continue scanning with the following buttons. Tools (Name) Setting the Output Method CaptureOnTouch is provided with various output methods for processing scanned images. The output method specification is common to Scan First and Select Scan Job. Description (Zoom in) Enlarges the preview image. (Fit page) Enlarges or reduces the preview image to fit the current window size.
Print Environmental Settings To configure the environmental settings of CaptureOnTouch, open the [Environmental settings] dialog box. Click (CaptureOnTouch icon) in the taskbar, and select [Environmental settings] from the menu. Prints the scanned images with a specified printer. When you specify this output method, specify the printer for printing. The following describes the setting items of each tab displayed in the [Environmental settings] dialog box.
Back Up / Restore Maximum size of attached file Use the [Back Up] and [Restore] buttons to back up the configuration file (settings, registered jobs, etc.) of CaptureOnTouch and restore the settings from the backup data. Select the [Display confirmation message if file size exceeds the above] check box to display a confirmation message when an attached file exceeds the maximum size. • For Scan First, a confirmation message appears if the file size of scanned images is larger than the file size set here.
[Plugin] Tab On the [Plugin] tab, confirm the plugins that have been added to CaptureOnTouch. [Maintenance] tab With the [Maintenance] tab, you can output log files for CaptureOnTouch maintenance purposes.
Scanning with CapturePerfect 3 Scanning with CapturePerfect Select [Canon DR-M140] and click [OK]. This section describes procedures from launching CapturePerfect to selecting a scanner, as well as procedures for scanning with the [Scan batch to file] function. See the “CapturePerfect Operating Guide” or help for details. 1 From the Windows task bar, click [Start] and then select [All Programs]. Hint Then click [CapturePerfect 3.1] followed by [CapturePerfect 3.1].
6 10 If the placed document is removed, the scan will be Configure the scanning conditions. (See p. 50) interrupted and the [Continue Scanning] dialog box appears. To continue scanning, add a document and click [Continue Scanning] To stop scanning, click [Cancel Scan]. 11 When scanning is finished, click [Exit] in the [File] menu. 7 8 9 Place the document. (See p. 26) Click [Scan Batch to File] in the [Scan] menu.
Setting the Scanner Driver When you scan a document in an ISIS compatible or TWAIN compatible application (CaptureOnTouch, etc.), open the scanner driver and configure the scanning conditions and other settings. This section describes the configuration and functions of the scanner driver. Hint Depending on the ISIS compatible application, the application may have its own screen for setting scanning conditions.
[Image processing] tab [Others] tab Set the processing method for scanned images. Configure special scan method and image processing settings. [Feeding] tab Setting Basic Scanning Conditions This section provides an overview of the basic setting items that are the minimum requirements when configuring the scanner settings.
Color mode Dots per inch Select the scanning mode. Select the scanning resolution. • [Advanced Text Enhancement] and [Advanced Text Enhancement II] remove or process the background color and background surrounding text to enhance the text for easy reading. When [Advanced Text Enhancement II] is selected, you can make the text in scanned images easier to read by adjusting the contrast on the [Brightness] tab.
Scanning Documents of Unregistered Page Sizes Configuring Scanner Settings According to Purpose You can register a non-standard page size that has not been registered as a page size by naming and registering it as a custom page size in the Custom Paper Size dialog box, which is opened from the [Save] button on the [Basic] tab. Set the scanning conditions according to the scanning purpose.
When you do not want to scan colored lines and text When you want to enhance contours in images Specify the color (red, green, blue, all colors) to be ignored (dropped out) in the color drop-out settings on the [Image processing] tab, and that color will be removed from the scanned image. Adjust the edge emphasis setting on the [Image processing] tab.
When you want to enhance text that is difficult to read because of factors such as the background of the scanned document When you want to detect multiple pages fed at the same time Select the [Double Feed Detection] check box on the [Feeding] tab. You can enable either one or both of [Detect by Ultrasonic] and [Detect by Length]. Select [Advanced Text Enhancement] or [Advanced Text Enhancement II] in the mode setting on the [Basic] tab.
When you want to rotate the images of a document placed horizontally to correct the orientation • Set [Batch Separation] on the [Others] tab to [Auto]. Specify the rotation angle in [Document Orientation] on the [Others] tab. When [Batch Separation] is set to [Auto], the batch is separated after the next document is placed and scanning is continued. When [Patchcode] is set, batch separation can be performed by using a patchcode. (See p.
A When you want to specify different scanning conditions for the front and back pages of a document, select [Skip Blank Page] or [Both] for [Scanning Side] on the [Basic] tab in advance. B Specify the number of scanning conditions to apply in [Stream count of Front]. Up to three can be specified. C Select [Front 1st], and then open the other tabs and set the scanning conditions. Depending on the value specified for [Stream count of Front], configure the remaining [Front 2nd] and [Front 3rd] in the same way.
When you want to save a scanner driver setting When you finish configuring a setting, click the [Save] button of [User Preference] to save the setting. The saved setting is registered to the list. You can delete a setting from the list with the [Delete] button, and save or load a configuration file with the [Back Up] or [Restore] button.
Function Restrictions Depending on Mode Setting Some of the setting items in each of the driver tabs are disabled as follows depending on the setting for [Color Mode] on the [Basic] tab.
More Advanced Scanning Methods The following operations are performed when using patchcodes for scanning. Using a Patchcode for Scanning DR-M140 supports batch separation (automatic file separation) functions by using patchcodes. By tucking patchcode sheets supplied with this scanner into a document and scanning it, the scanner can automatically separate files by images of documents containing patchcode sheets (or documents after the patchcode sheet).
3 IMPORTANT • Patchcodes must be printed in their normal size. If patchcodes are enlarged or reduced, they may not be recognized correctly. • When copying provided patchcodes to create different sized patchcodes, ensure that the patchcode fits inside the effective range shown in the following diagram. Also, when copying patchcodes, ensure that they are the same size and shade as the original. 5 mm (0.2") Patchcode In an application, specify a patchcode as a type of batch separation.
Maintenance Daily Maintenance Clean the scanner on a regular basis, as described below, to maintain peak scanning quality. Cleaning the Sensor Glass and the Rollers CAUTION If scanned images contain streaks, or if the scanned documents become dirty, the sensor glass or rollers inside the scanner may be dirty. Clean them periodically. • When cleaning the scanner and the inside of the scanner, turn OFF the power switch and disconnect the power cord from the power outlet.
3 4 5 Use compressed air to remove dust and paper particles from the inside of the scanner. Clean the rollers. Clean the rollers while turning them. Wipe the rollers with a cloth that has been dampened with water and thoroughly wrung out, and then use a clean, dry and soft cloth to wipe away any moisture. Wipe any dirt off the scanning glass.
7 10 Close the document feed tray. Wipe the removed rollers with a cloth that has been dampened with water and thoroughly wrung out. Adjusting the Reduction Ratio 8 9 As the rollers installed in the scanner wear out, scanned images may become stretched in the vertical direction. If this happens, you can reduce the amount of stretching of the image by adjusting the reduction ratio. Reattach the retard roller and feeding roller. (See p. 67, p.
3 4 Click [Canon DR-M140 USB] and click [Properties]. Replacing Consumable Parts Scanner properties are displayed. The feed roller and retard roller are consumable parts. The feed roller and retard roller wear with scanning. If the feed roller and retard roller are worn, documents may not feed correctly and paper jams and double feeds may occur.
2 3 Raise the OPEN lever, and open the upper unit. Close the upper unit by gently pushing down on the left and right sides. Push until it clicks into place to make sure that it is completely closed. Hint The location of each of the consumable parts is shown below. Feed Roller 4 Retard roller (inside the upper unit) 66 Close the document feed tray.
Replacing the Retard Roller 1 4 Press the roller cover to close it. Unlock the roller cover and open it. Replacing the Feed Roller 2 Remove the retard roller. 1 Lower the securing lever for the feed roller forward. 3 Install the new retard roller. 2 Slide the securing lever for the feed roller to the left.
3 Remove the feed roller, detaching the left side first. 4 Install the new feed roller, attaching the right side first. 6 Lower the securing lever for the feed roller until it clicks into place. Resetting the counter 1 2 Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [All Programs], [Canon DR-M140], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. 5 Slide the securing lever for the feed roller to the right.
3 Click [Canon DR-M140 USB] and click [Properties]. Auto Power Off Setting Scanner properties are displayed. The scanner automatically turns off if 4 hours elapse without scanning or another operation being performed. To disable this setting, follow the procedure below. 1 2 Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [All Programs], [Canon DR-M140], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts.
4 5 Click the [Maintenance] tab and then clear the [Turn off automatically after 4 hours] check box. Click [OK] to close the scanner properties.
Troubleshooting Common Problems and Solutions This section provides recommended solutions to common problems. If you have a problem that is not solved by the following, contact your local authorized Canon dealer. Problem 1 The scanner will not turn on. Solutions Confirm that the AC adapter is plugged firmly into a power outlet. Problem 2 The scanner is not recognized. Solutions (1) Confirm that the scanner is properly connected to the computer with a USB cable.
Problem 8 Scanned images are saved in TIFF instead of JPEG format. Problem 11 Scanned images of multiple pages cannot be saved in a single JPEG or BMP (PICT) file. Solutions When documents are scanned with CapturePerfect while [Color Mode] is set to [Detect automatically] in the scanner driver, documents detected as black and white are automatically saved in TIFF format, even if the file type is specified as JPEG format.
Software Troubleshooting This section describes troubleshooting problems and solutions for operating the supplied software (CaptureOnTouch and CapturePerfect). If scanning is too slow (1) Close other running programs, if any. (2) Scanning can be slowed down by memory shortage caused by memory-resident applications such as anti-virus programs. Close such memory-resident programs if necessary to free up memory space.
Useful tips Here are some useful tips for scanning documents. Can I copy or back up scanner setting configurations? CaptureOnTouch Scanner settings are backed up from the Environment settings. See also the following question, “Can I copy or back up CaptureOnTouch settings?”. CapturePerfect Scanner setting configurations cannot be copied or backed up in CapturePerfect.
CapturePerfect The rules for the file names of scanned images and the folder in which scanned images are saved can be set and then applied during scanning. For details, see the "Operating Guide" or help of CapturePerfect. How do I print scanned data? CaptureOnTouch • For Scan First scanning, select [Print] on the Output Method selection screen. • For selected job scanning, select [Print] as the [Output method selection] when registering the job.
Clearing Paper Jams and Skewed Documents When paper jams and skewed documents are detected during scanning, the following error codes are displayed in the scanner’s display panel and scanning is interrupted. 2 Raise the OPEN lever, and open the upper unit. Paper jam error code Skew detection error code When a paper jam or double feed occurs during scanning, use the following procedures to clear them. CAUTION Be careful when removing jammed paper. take care not to cut your hand on the edges of the paper.
IMPORTANT Make sure to pull the document out carefully, without applying too much force. If the jammed paper tears while you are pulling it out, make sure to remove any remaining pieces from inside the scanner. 4 Close the upper unit by gently pushing down on the left and right sides. Push until it clicks into place to make sure that it is completely closed. After removing the jammed paper, check to see if the last page was scanned correctly, and then continue scanning.
Uninstalling the Software If the ISIS/TWAIN driver, CaptureOnTouch or CapturePerfect is not operating normally, follow the procedure below to uninstall them. Then, re-install the software from the Setup disc. (See p. 7) IMPORTANT Log on to Windows as an Administrator. 1 2 From the Windows task bar, click the [Start] button and then [Control Panel]. Click [Uninstall a program] ([Add or Remove Programs] in Windows XP). The [Uninstall or change a program] dialog box appears.
Appendix Specifications Main Unit Scanning resolution (Primary Scan Lines x Secondary Scan Lines) 150 x 150dpi/200 x 200dpi/300 x 300dpi/400 x 400dpi/600 x 600dpi Scanning Speed (Conditions: Core i7 2.8GHz CPU, 4 GB memory, A4 document size) Grayscale Simplex 200dpi 40 pages/min. 300dpi 40 pages/min. Duplex 200dpi 80 images/min. 300dpi 80 images/min. 24-bit Color Simplex 200dpi 40 pages/min. 300dpi 40 pages/min. Duplex 200dpi 80 images/min. 300dpi 80 images/min. Interface Hi-Speed USB 2.
Limitation of Full Auto Mode Replacement Parts When a document is scanned with Flatbed Scanner Unit 101, Full Auto mode of CaptureOnTouch may not function effectively. Exchange roller kit (product code: 5972B001) Kit to replace the rollers (feed roller unit, retard roller). • For the replacement procedure, see “Replacing Consumable Parts” on p. 65. • Contact your local authorized Canon dealer or service representative for detailed information about the replacement parts.
Dimensions 181 mm (7.13") 313 mm (12.32") 165 mm (6.5") 250 mm (9.
Index A R Adjusting the Reduction Ratio .................................................... 64 Auto Power Off Setting ............................................................... 69 Reset Counter ................................................................................ 68 Rollers Cleaning ............................................................................... 62 Replacing .............................................................................
CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC. 703 WATERFORD WAY, SUITE 400 MIAMI, FLORIDA 33126, U.S.A. CANON AUSTRALIA PTY. LTD. 1 THOMAS HOLT DRIVE, NORTH RYDE, SYDNEY. N.S.W, 2113. AUSTRALIA CANON SINGAPORE PTE. LTD.
