User Manual • Please read this manual before operating this scanner. • After you finish reading this manual, store it in a safe place for future reference.
FCC REGULATIONS (For 120 V model) RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 120 V models) Document Scanner, Model M111091 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Für EMVG Copyright Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts-und Gewerbebereich sowie in Kleinbetrieben vorgesehen. Copyright 2011 by CANON ELECTRONICS INC. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of CANON ELECTRONICS INC.
Setup Guide STEP 1 Please read first. Checking the Accessories If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative. Scanner Feed Tray USB Cable Type A/Type B (Length: 1.8 m) Ava Vo nt r de l’u A Pr ntes m tilis Vo ima de Geb atio or de la ut rauc n ge ll’ br uso iliza h uik ción AC Adapter/Power Cord (Connected length: 2.6 m) Reference Guide Setup Disc Before Use (Europe only) Warranty Card (U.S.A.
Setup Disc Contents Third-Party Software Install the following software necessary for using the scanner from the supplied Setup Disc. • CaptureOnTouch This is a dedicated scanning application for this product. • CapturePerfect 3.1 This is a scanning application for the DR series scanner. • Scanner Driver This is the scanner driver for this product. The following software applications are also included on the supplied Setup Disc. For details on installing these applications, refer to the Readme.txt file.
STEP 2 Installing the Software System requirements • Scanning speeds are lower if your computer's standard USB interface is USB Full-Speed (equal to USB 1.1.) • The USB cable you are using should be the one originally included with the scanner. • If the CPU, memory, interface card, and other specifications do not satisfy the installation requirements, the scanning speed may be greatly reduced and transmission may take a long time.
Software Installation 2 Click [Typical Installation]. IMPORTANT • Install the software before connecting the scanner to the computer. • Log on to Windows as an Administrator. • Close all other applications before installing the software. 1 Insert the software setup disc into the DVD drive of the computer. The setup menu automatically starts up when you insert the disc into the drive. (If the menu does not start up, execute setup.exe from the disc.
4 5 Click [Next]. Read the license agreement, and click [I accept the terms in the license agreement] and then [Next] if you agree to it. 8 6 Click [Install]. 7 When the driver installation is complete, click [Finish]. 8 Click [Next].
12 When CaptureOnTouch installation is complete, click Read the license agreement, and click [Yes] to accept it. [Finish]. 10 Click [Next]. 13 Click [Next]. 11 Specify whether to install the plug-in for SharePoint, and click [Next].
14 Read the license agreement, and click [I accept the terms 16 When CapturePerfect installation is complete, click in the license agreement] and then [Next] if you agree to it. [Finish]. 17 Select the language you want to use, and click [Next]. 15 Click [Next]. 18 Click [Next].
19 When the User Manual installation is complete, click [Finish]. 20 Click [Exit] to finish installing the software.
STEP 3 Connecting to a Computer Connect the scanner to the computer and the power supply. IMPORTANT • Do not connect the scanner to the computer before installing the software. • Before connecting the scanner to the computer, verify that the power of the scanner is OFF. If the power is ON, turn it OFF.
STEP 4 Turning the Power ON The power of the scanner can be turned ON and OFF with the power button on the front of the scanner. 1 2 When the scanner is properly connected to the computer, the (CaptureOnTouch) icon appears on the taskbar as follows. Make sure that the scanner and computer are connected properly. If the taskbar icon appears as , the scanner is not properly connected to the computer. Check the status of the power switch and USB cable. Press the power button.
Introduction Thank you for purchasing the Canon imageFORMULA DR-M160 Document Scanner. Please read the following manuals carefully and familiarize yourself with the functions of the scanner before use to ensure you sufficiently understand the functions and make the most of the scanner’s capabilities. After reading the manuals, store them in a safe place for future reference.
Table of Contents Setup Guide ......................................................................... 4 Introduction ....................................................................... 14 Scanning with CapturePerfect .................................... 49 Symbols Used in This Manual.................................................... 14 Setting the Scanner Driver .......................................... 51 Before Using the Scanner..........................
Before Using the Scanner Important Safety Instructions ● Avoid exposing the scanner to rapid changes in temperature. If the room in which the scanner is installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner. This may result in a noticeable degradation in scanning quality. The following conditions are recommended for optimal scanning quality: Room temperature: 10 °C to 32.5 °C (50 °F to 90.
● Never try to take the AC adapter apart or modify it in any way, as this is dangerous. ● Do not use flammable spray near the scanner. ● When cleaning the scanner, push the power button to turn it OFF and disconnect the power cord from the power supply. ● Clean the scanner using a slightly dampened cloth which has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances.
● When unplugging the power cord, grasp it firmly by its plug. Do not pull directly on the power cord, as this may damage or expose the cord's internal wiring, resulting in a fire or electric shock. ● Leave sufficient space around the power plug so that it can be unplugged easily. If objects are placed around the power plug, you will be unable to unplug it in an emergency. ● Do not allow water or flammable substances (alcohol, paint thinner, benzene, etc.
Features of the Scanner ● Auto Resolution Detection When enabled in the CaptureOnTouch or scanner driver settings, this function detects the content of documents and determines the scanning resolution automatically. ● Folio Scan You can scan folded documents. The scanner will scan both sides and combine the scanned images into a single image. ● Deskew The scanner straightens scanned images when it detects that the document was placed askew.
● Prescan Function The scanner is equipped with a Prescan function that allows you to adjust the contrast and brightness of a prescanned image and then send the adjusted image to the application software, without needing to scan the document again. ● Start Scanning from the Operating Panel You can start scanning by launching CaptureOnTouch with the operating panel buttons. By default, Job No.
Names and Functions of Parts Front View (With the Eject Tray Closed) E F A B C D A OPEN Lever C Document Eject Tray Pull this toward you to open the front unit. Open this for scanning. Scanned documents are output here. B Power button D Eject Tray Support Press this to turn on the scanner. When pressed, the power indicator is lit. Press this button again to turn off the power. The power button lights or flashes as follows depending on the scanner status.
Front View (With the Eject Tray Open) G H I J K L M G Feed Extension Support K Eject Support Open this when placing long paper in the scanner. Open this when loading long documents. H Feed Support L Document Eject Extension Support Pull this out to support loaded documents. If required, pull this out to match the length of loaded documents.
B Job Select Button Back View This selects registered jobs. Every time the button is pressed, the Job No. displayed in the Job No. Indicator changes. C Start Button This executes the job displayed in the Job No. Indicator. D Stop Button This stops active jobs. E DFR Button A This is lit when a document double feed is detected. Pressing this button cancels the double feed detection function, allowing you to continue scanning.
Basic Operation Documents • Scanning documents before the ink is dry can cause problems with the scanner. Always make sure that the ink on a document is dry before scanning it. • Scanning documents that are written in pencil or similar material may make the rollers and scanning glass dirty, which can lead to smudges on the scanned image and transfer the dirt to subsequent documents. Always clean the internal parts of the scanner after scanning such documents.
Card (plastic or laminated) Size: 53.9 mm x 85.5 mm (2.12" x 3.37") (ISO standard) Card thickness: 1.4 mm (0.055") or smaller Orientation: Horizontal feeding only Embossed cards can be scanned. CAUTION • When scanning cards, place them to be fed horizontally. If you place cards to be fed vertically, they may not be ejected properly, and cards that get jammed may be damaged when you remove them. • Embossed cards may not be able to be scanned correctly, depending on the type of embossment.
How to Place Documents When placing long documents, pull out the document eject extension support to match the length of those documents. Also, stand the eject stopper at the end of the eject support if necessary. Scanning multiple documents Standard paper feeding should be used when scanning multiple documents of a standard size at one time. Standard paper feeding enables multiple documents to be fed while separating each page. 1 Open the document eject tray.
4 5 • Before you place a document, check to make sure it does not contain paper clips, staples, or other small metal objects. These items may cause a fire or electrical shock, damage the document, or cause a paper jam or scanner malfunction. • Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it, as this may result in personal injury. Be extra careful of neckties and long hair.
4 Placing Thin Paper (Thin Paper Mode) Select the [Non Separation Feeding Mode] check box. When placing a document with thin paper, switch the mode of the scanner to thin paper mode. In thin paper mode, the placed document is fed in a manner that prevents it from being damaged. Thin paper mode switching is performed by opening the scanner driver settings screen. This section describes how to operate the CapturePerfect software included with this scanner.
6 3 Place the document as described in the “Scanning multiple documents” procedure on p. 26. Place the card horizontally, with the reverse side facing you, and the top of the card facing down. Hint • When scanning multiple page documents that are fastened together, such as invoices, select the [Non Separation Feeding Mode] check box in step 4. Also, it is recommended to place the documents in the scanner one at a time with the edge that is fastened together facing down.
5 Placing Folded Documents Select the [Non Separation Feeding Mode] check box. Folio Scan enables you to scan documents that are larger than LTR/ A4 and therefore do not fit in the feeder. (The maximum size is 11" X 17"/A3.) To use the function, fold the document in half lengthwise and place it into the feeder. The DR-M160 will scan both sides and combine the scanned images into a single image. 1 2 3 Start CapturePerfect. (See p. 49) Open the settings screen for the scanner driver. (See p.
8 Setting the Long Document Mode Place the document with the folded edge facing right and the top edge facing downward. The length of documents that can be scanned with the scanner is normally 356 mm (14"), but you can scan documents up to 3,000 mm (118.1") long by setting the scanner to the Long Document mode. After placing the document, align the document guides with both edges of the document.
3 5 6 Click [CANON DR-M160 USB] and click [Properties]. Scanner properties are displayed. Click [OK]. Turn the scanner OFF and then ON again. Detecting a document double feed This scanner includes a function to detect document double feeds. By using this function, the scanner will automatically stop when it detects that multiple documents have been fed at the same time.
4 6 7 Select either the [Detect by Length] or the [Detect by Ultrasonic] check box (or both). Click the [OK] button and close the settings screen. Place the document as described in the “Scanning multiple documents” procedure on p. 26. What to do when a double feed is detected When not using the double feed detection ignore function If a document double feed is detected during scanning, document feeding stops when the double fed documents are ejected.
When using the double feed detection ignore function If a document double feed is detected during scanning, document feeding stops when the double fed documents are ejected. The following error code is displayed in the Job No. Indicator of the operating panel, and the DFR button lights. Buttons of [Rapid Recovery System] Screen Buttons of Operating Panel Description [SAVE & CONTINUE] DFR button Saves the preview image as a scanned image and scans the rest of the document.
4 5 6 7 8 Select the [Detect by Ultrasonic] check box. Click the [Settings] button. Select the [Separation Retry] check box. Click the [OK] button to return to the scanner driver settings screen. Click the [OK] button and close the settings screen. From now on, a document will be automatically returned to the document feeder and re-fed when a double feed is detected during scanning.
Scanning methods Scanning with CaptureOnTouch Operating the scanner with the operating panel buttons What is CaptureOnTouch? You can start scanning by selecting a job from the scanner’s operating panel. CaptureOnTouch is a scanning application that allows you to scan a document with a simple operation by following the instructions on the screen. Save to folder Save the file to a specified folder.
Exiting CaptureOnTouch Scan First Click at the top of the window to close the CaptureOnTouch main window. When doing so, the main window closes but CaptureOnTouch is kept as resident in the system. To stop CaptureOnTouch being resident in the system, click the (CaptureOnTouchiconj in the taskbar, and select [Exit] from the menu. Scan a document and then select the output method. This method allows you to easily scan a document by just following the instructions on the screen.
3 IMPORTANT Set the scan method in the top screen. If you configure scanning conditions that consume a large amount of the computer's memory, scanning may stop because of insufficient memory. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions, and then try scanning again. A B Hint If a document is scanned when [Enable continuous scanning] is set to [ON], the Continuous Scanning screen (see p.
5 Select Scan Job Configure the settings related to output and then output the scanned images. Register scanning settings from the scanning conditions to the output method as jobs, and then scan a document by just selecting the job that suits your purpose. This method is convenient when you want to repeat scanning using a set procedure. Operation Flow A Register the job ▼ B Select the job ▼ Scan the document ▼ A Configure the settings related to output. (See p.
2 4 Enter the job name, and press the Enter key. Click [Output settings], and configure the output settings. The output setting items differ depending on the specified output method. For details on the setting items, see the Help of CaptureOnTouch. Hint Job numbers up to 9 are added (in numerical order) to the end of the set job name. By specifying the job number with the operating panel, you can start scanning after pressing the operating panel button. (See p.
Hint IMPORTANT • If you set [Check output after scanning] to [ON], you can check the output settings after scanning. • If you set [Enable continuous scanning] to [ON], you can continue to scan additional documents after all the pages of the initial document are scanned. 3 If you configure scanning conditions that consume a large amount of the computer's memory, scanning may stop because of insufficient memory.
When [Check output after scanning] is set to [ON] Operating the scanner with the operating panel buttons The Output Confirmation screen appears before the scanned images are output. Change the settings for the output method if necessary and then click the output button. The name of the output button differs for each selected output method. You can start scanning by selecting a job from the scanner’s operating panel. 1 2 3 Set a job number every time a job is registered with CaptureOnTouch.
Setting Basic Items Scanner Settings Scanner settings include the basic items that are configured in [Scanner Settings], and the setting items that are configured in the advanced settings dialog box. The settings in the advanced settings dialog box are applied for settings other than the basic items. The settings in the driver settings dialog box are applied for any other settings.
Operation in Continuous Scanning Screen Use advanced settings dialog box Configure scanner settings other than the basic items in the advanced settings dialog box (scanner driver). To open the scanner driver, select [ON] and then click the button. If a document is scanned with either Scan First or Select Scan Job when [Enable continuous scanning] is set to [ON] in the Start screen, the Continuous Scanning screen appears when all of the pages of the placed document have been fed.
C Preview Controls Control the preview images and cancel or continue scanning with the following buttons. Tools (Name) Setting the Output Method CaptureOnTouch is provided with various output methods for processing scanned images. The output method specification is common to Scan First and Select Scan Job. Description (Zoom in) Enlarges the preview image. (Fit page) Enlarges or reduces the preview image to fit the current window size.
Print Environmental Settings To configure the environmental settings of CaptureOnTouch, open the [Environmental settings] dialog box. Click (CaptureOnTouch icon) in the taskbar, and select [Environmental settings] from the menu. Prints the scanned images with a specified printer. When you specify this output method, specify the printer for printing. The following describes the setting items of each tab displayed in the [Environmental settings] dialog box.
Back Up / Restore Maximum size of attached file Use the [Back Up] and [Restore] buttons to back up the configuration file (settings, registered jobs, etc.) of CaptureOnTouch and restore the settings from the backup data. Select the [Display confirmation message if file size exceeds the above] check box to display a confirmation message when an attached file exceeds the maximum size. • For Scan First, a confirmation message appears if the file size of scanned images is larger than the file size set here.
[Plugin] Tab On the [Plugin] tab, confirm the plugins that have been added to CaptureOnTouch. [Maintenance] tab With the [Maintenance] tab, you can output log files for CaptureOnTouch maintenance purposes.
Scanning with CapturePerfect 3 Scanning with CapturePerfect Select [Canon DR-M160] and click [OK]. This section describes procedures from launching CapturePerfect to selecting a scanner, as well as procedures for scanning with the [Scan batch to file] function. See the “CapturePerfect Operating Guide” or help for details. 1 From the Windows task bar, click [Start] and then select [All Programs]. Hint Then click [CapturePerfect 3.1] followed by [CapturePerfect 3.1].
6 10 If the placed document is removed, the scan will be Configure the scanning conditions. (See p. 51) interrupted and the [Continue Scanning] dialog box appears. To continue scanning, add a document and click [Continue Scanning] To stop scanning, click [Cancel Scan]. 11 When scanning is finished, click [Exit] in the [File] menu. 7 8 9 Place the document. (See p. 26) Click [Batch to File] in the [Scan] menu.
Setting the Scanner Driver When you scan a document in an ISIS compatible or TWAIN compatible application (CaptureOnTouch, etc.), open the scanner driver and configure the scanning conditions and other settings. This section describes the configuration and functions of the scanner driver. Hint Depending on the ISIS compatible application, the application may have its own screen for setting scanning conditions.
[Image processing] tab [Others] tab Set the processing method for scanned images. Configure special scan method and image processing settings. [Feeding] tab Setting Basic Scanning Conditions This section provides an overview of the basic setting items that are the minimum requirements when configuring the scanner settings.
Color mode Dots per inch Select the scanning mode. Select the scanning resolution. • [Advanced Text Enhancement] and [Advanced Text Enhancement II] remove or process the background color and background surrounding text to enhance the text for easy reading. When [Advanced Text Enhancement II] is selected, you can make the text in scanned images easier to read by adjusting the contrast on the [Brightness] tab.
Scanning Documents of Unregistered Page Sizes Configuring Scanner Settings According to Purpose You can register a non-standard page size that has not been registered as a page size by naming and registering it as a custom page size in the Custom Paper Size dialog box, which is opened from the [Save] button on the [Basic] tab. Set the scanning conditions according to the scanning purpose.
When you do not want to scan colored lines and text When you want to enhance contours in images Specify the color (red, green, blue, all colors) to be ignored (dropped out) in the color drop-out settings on the [Image processing] tab, and that color will be removed from the scanned image. Adjust the edge emphasis setting on the [Image processing] tab.
When you want to match the orientation of images to the text when scanning a mixture of pages with different text orientations • Advanced Text Enhancement is suitable for a document with a light background color or a document with a non-uniform background (such as a pattern). If the background is uniform, it is removed where it surrounds the text, and if the background is non-uniform, it is processed to enhance text readability.
When you want to use batch separation for scanning When you want to use multistream settings for scanning When you want to divide and scan a document, you can separate a batch at the timing with which each next document is placed and scanned. (Only enabled for applications that support batch separation.) In this case, set the scanner driver as follows. • Set [Feeding Option] on the [Feeding] tab to [Panel-Feeding] or [Automatic Feeding].
When you want to save a scanner driver setting Hint When you finish configuring a setting, click the [Save] button of [User Preference] to save the setting. The following shows the setting conditions that can be set in the multistream settings.
Function Restrictions Depending on Mode Setting Some of the setting items in each of the driver tabs are disabled as follows depending on the setting for [Color Mode] on the [Basic] tab.
More Advanced Scanning Methods The following operations are performed when using patchcodes for scanning. Using a Patchcode for Scanning DR-M160 supports batch separation (automatic file separation) functions by using patchcodes. By tucking patchcode sheets supplied with this scanner into a document and scanning it, the scanner can automatically separate files by images of documents containing patchcode sheets (or documents after the patchcode sheet).
3 IMPORTANT • Patchcodes must be printed in their normal size. If patchcodes are enlarged or reduced, they may not be recognized correctly. • When copying provided patchcodes to create different sized patchcodes, ensure that the patchcode fits inside the effective range shown in the following diagram. Also, when copying patchcodes, ensure that they are the same size and shade as the original. 5 mm (0.2") Patchcode In an application, specify a patchcode as a type of batch separation.
Maintenance Daily Maintenance Clean the scanner on a regular basis, as described below, to maintain peak scanning quality. Cleaning the Inside of the Scanner Dust or paper particles inside the scanner may cause lines or smudges to appear on scanned images. Use compressed air to periodically clean dust and paper particles from the document feed opening and the inside of the scanner.
2 4 Pull the OPEN lever and pull open the front unit toward you. Wipe any dirt off the scanning glass. Wipe any dirt off the scanning glass with a cloth that has been dampened with water and thoroughly wrung out, and then wipe the glass dry with a clean, dry and soft cloth. Scanning Glass 3 Use compressed air to remove dust and paper particles from the inside of the scanner. CAUTION Do not spray water or neutral detergent directly on the scanner.
6 Remove the retard roller and feed roller. (See p. 68, p. 68) IMPORTANT Remove the retard roller and feed roller from the scanner to clean them, and be sure to reattach them to the scanner when cleaning is finished. 7 Wipe the removed rollers with a cloth that has been dampened with water and thoroughly wrung out. Anti-Static brush 5 Clean the rollers. Clean the rollers while turning them.
9 Adjusting the Reduction Ratio Close the front unit by gently pushing it up on both sides until it clicks into place. Make sure that the front unit is completely closed by pushing until you hear a click. The two rollers (feed roller and retard roller) installed in the scanner are consumable parts that wear with scanning. If the rollers are worn, scanned images may become stretched in the vertical direction.
4 If this message begins to be displayed at startup, purchase an exchange roller kit and replace the worn parts with the consumable parts included in the kit (feed roller and retard roller). See p. 82 for details about the exchange roller kit. Furthermore, the counter in the scanner that records the number of pages fed also needs to be reset when you replace the rollers. (See p. 69) Click the [Maintenance] tab and then change the value of [Reduction ratio adjustment].
2 3 Pull the OPEN lever and pull open the front unit toward you. 4 Hint The location of each of the consumable parts is shown below. Feed Roller Retard roller (inside the front unit) 67 When closing the front unit, make sure that it is completely closed by gently pressing the left and right until you hear a click. Close the document eject tray.
Replacing the Feed Roller 1 4 Close the roller cover. Open the roller cover. Replacing the Retard Roller 2 Remove the feed roller. 1 3 Install the new feed roller. 2 68 Open the roller cover. Pull the left lever that secures the retard roller to the scanner, and remove the roller.
▼ 3 5 Install the new retard roller by inserting the right side first. Close the roller cover. Resetting the counter 1 2 Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [All Programs], [Canon DR-M160], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. 4 Push the left side of the retard roller to secure it to the scanner.
3 5 Click [Canon DR-M160 USB] and click [Properties]. Click [OK] to close the scanner properties. Scanner properties are displayed. Auto Power Off Setting The scanner automatically turns off if 4 hours elapse without scanning or another operation being performed. To disable this setting, follow the procedure below. 1 2 Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [All Programs], [Canon DR-M160], and [Canon imageFORMULA Utility].
3 5 Click [Canon DR-M160 USB] and click [Properties]. Click [OK] to close the scanner properties. Scanner properties are displayed. Removing the Document Feed Tray When you will store or otherwise not use the scanner for a long period of time, remove the document feed tray. 4 Click the [Maintenance] tab and then clear the [Turn off automatically after 4 hours] check box.
Troubleshooting Common Problems and Solutions This section provides recommended solutions to common problems. If you have a problem that is not solved by the following, contact your local authorized Canon dealer. Problem 1 The scanner will not turn on. Solutions Confirm that the AC adapter is plugged firmly into a power outlet. Problem 2 The scanner is not recognized. Solutions (1) Confirm that the scanner is properly connected to the computer with a USB cable.
Problem 6 Pages are missing. Solutions When the scanner driver’s [Scanning Side] setting is [Skip Blank Page], documents with very little black may be unintentionally skipped. Click the [Setting] button and decrease the [Set the likelihood of skipping blank page] value, or select another scan mode setting such as [Simplex] or [Duplex]. If pages are skipped due to the document double feeding, see “Problem 7 Documents jam (or double-feed)”. Problem 7 Documents jam (or double-feed).
Problem 12 Memory becomes insufficient and scanning stops. Solutions If you configure scanning conditions that use a large amount of the computer's memory, scanning may stop because of insufficient memory. Although this depends on the computer's memory size, the possibility of insufficient memory increases if any of the following scanning conditions overlap. • [Color Mode] is set to [24-bit Color] • A large page size (e.g. Legal) is specified as the [Page Size].
Software Troubleshooting This section describes troubleshooting problems and solutions for operating the supplied software (CaptureOnTouch and CapturePerfect). If scanning is too slow (1) Close other running programs, if any. (2) Scanning can be slowed down by memory shortage caused by memory-resident applications such as anti-virus programs. Close such memory-resident programs if necessary to free up memory space.
Useful tips Here are some useful tips for scanning documents. Can I copy or back up scanner setting configurations? CaptureOnTouch Scanner settings are backed up from the Environment settings. See also the following question, “Can I copy or back up CaptureOnTouch settings?”. CapturePerfect Scanner setting configurations cannot be copied or backed up in CapturePerfect.
CapturePerfect The rules for the file names of scanned images and the folder in which scanned images are saved can be set and then applied during scanning. For details, see the "Operating Guide" or help of CapturePerfect. • For selected job scanning, select [Print] as the [Output method selection] when registering the job. CapturePerfect Scan using the scan batch print function. Alternatively, register a job with a printer selected as the output destination.
Clearing a Paper Jam When paper jams and double feeds are detected during scanning, the following error codes are displayed in the scanner’s display panel and scanning is interrupted. 2 Pull the OPEN lever and pull open the front unit toward you. Paper jam error code When a paper jam or double feed occurs during scanning, use the following procedures to clear them. CAUTION Be careful when removing jammed paper. take care not to cut your hand on the edges of the paper.
IMPORTANT Make sure to pull the document out carefully, without applying too much force. If the jammed paper tears while you are pulling it out, make sure to remove any remaining pieces from inside the scanner. 4 Close the front unit by gently pushing it up on both sides until it clicks into place. Make sure that the front unit is completely closed by pushing until you hear a click. After removing the jammed paper, check to see if the last page was scanned correctly, and then continue scanning.
Uninstalling the Software If the ISIS/TWAIN driver, CaptureOnTouch or CapturePerfect is not operating normally, follow the procedure below to uninstall them. Then, re-install the software from the Setup disc. (See p. 7) IMPORTANT Log on to Windows as an Administrator. 1 2 From the Windows task bar, click the [Start] button and then [Control Panel]. Click [Uninstall a program]. The [Uninstall or change a program] dialog box appears.
Appendix Specifications Main Unit Duplex 200dpi 120 images/min. 300dpi 120 pages/min. 24-bit Color Simplex 200dpi 60 pages/min. 300dpi 40 pages/min. Duplex 200dpi 120 images/min. 300dpi 80 pages/min. Interface Hi-Speed USB 2.0 Other functions Folio scanning, double feed detection ignore, double feed retry External Dimensions 280 mm (11.02")(W) x 172 mm (6.77")(D) x 178 mm (7.01")(H) (With the feed tray removed and the document eject tray closed) 280 mm (11.02")(W) x 606 mm (23.86")(D) x 366.4 mm (14.
Limitation of Full Auto Mode Replacement parts When a document is scanned with Flatbed Scanner Unit 101, Full Auto mode of CaptureOnTouch may not function effectively. Exchange roller kit (product code: 5607B001AA) Kit to replace the rollers (feed roller, retard roller). • For the replacement procedure, see “Replacing Consumable Parts” on p. 66. • Contact your local authorized Canon dealer or service representative for detailed information about the replacement parts.
Dimensions 231 mm (9.09") 280 mm (11.02") 366.4 mm (14.43") 606 mm (23.
Index A P Adjusting the Reduction Ratio .................................................... 65 Auto Power Off Setting ............................................................... 70 Patchcode .................................................................................. 60 Power ......................................................................................... 13 C R CaptureOnTouch Environmental Settings ........................................................ 46 Restarting ..............
CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC. 703 WATERFORD WAY, SUITE 400 MIAMI, FLORIDA 33126, U.S.A. CANON AUSTRALIA PTY. LTD. 1 THOMAS HOLT DRIVE, NORTH RYDE, SYDNEY. N.S.W, 2113. AUSTRALIA CANON SINGAPORE PTE. LTD.
