Specifications
Scanning Film
35mm
Slides
---------------------------
CD
Align the
Film
Guide's tab
with
the
FILM
symbol on the document
glass
of
the scanner.
~
Place
a slide or slides face
down
(correctly viewed
from below)
in
the
Film
Guide
as
shown
in
the
diagram
to
the right.
120 Format Film Strips
------------------------
CD
Open the
Film
Holder on the
Film
Guide, place the
film face
down
and close the
Film
Holder.
~ Align the
Film
Guide's tab
with
the
FILM
symbol on
the document
glass
of
the scanner.
With its glossy side facing upward, slip
the film retainer sheet under the film.
Scanning Curled 120 Format Films
Curled film strips
can
stick
to
the document
glass
of
the scanner and
cause
a pattern
of
rings called Newton
Rings
to
appear on the scanned image. If this occurs,
scan
using the supplied film retainer sheet
as
shown
in
the figure.
(A)
Scan
with
the film retainer sheet inserted beneath
the film.
(B)
If Newton
Rings
still appear after following
Instruction (A), turn the film strip over and place it
in
the
Film
Holder
with
the film retainer sheet on
top
so
that
the film edges are held
down
for
scanning. Then preview the image
in
ScanGear
CS
and click the [Mirror]
button
to
reverse the image
before initiating the final scan.
(A)
(B)
Hold the film edges down
by
placing the film retainer
sheet on
top
with
its glossy
side
facing downward.
Film
Holder