User's Manual

Note
• Use ScanGear (scanner driver)'s Advanced Mode tab to correct gutter shadows when
scanning non-standard size items or specified areas.
Refer to "Gutter Shadow Correction" for your model from Home of the Online Manual for
details.
• When Select Source is Auto:
Apply recommended image correction
Applies suitable corrections automatically based on the item type.
Important
• The color tone may differ from the source image due to corrections. In that case,
deselect the checkbox and scan.
Note
• Scanning takes longer than usual when you enable this function.
(2) Printer Settings Area
Paper Size
Select the size of the paper to print on.
Note
• Selectable paper sizes depend on the selected printer.
Number of Copies
Specify the number of copies to print.
Click (up and down buttons) to the right of the value or enter a value.
Specify up to 99 copies.
Printer
Select a printer to use when multiple printers are connected.
Click Properties... to open a dialog box to configure the printer settings.
Instructions
Opens this guide.
Defaults
You can restore the settings in the displayed screen to the default settings.
110