User's Manual

Cannot Install ScanGear (Scanner Driver)
If the installation does not start even after the Setup CD-ROM is inserted
into your computer's disc drive:
Start the installation following the procedure below.
1.
Follow the procedures as shown below.
•
In Windows 8.1 or Windows 8, select the Explorer icon in taskbar on Desktop, then select
Computer from the list on the left.
•
In Windows 7 or Windows Vista, click Start then Computer.
•
In Windows XP, click Start then My Computer.
2.
Double-click the CD-ROM icon on the displayed window.
If the contents of the CD-ROM are displayed, double-click MSETUP4.EXE.
If you cannot install ScanGear (scanner driver) from the Setup CD-ROM, download and install the MP
Drivers from the web page.
Note
• If the CD-ROM icon is not displayed, try the following:
•
Remove the CD-ROM from your computer, then insert it again.
• Restart your computer.
If the icon is not yet displayed, try different discs and see if they are displayed. If other discs are
displayed, there is a problem with the Setup CD-ROM. In this case, contact the service center.
If you are unable to proceed beyond the Scanner Connection:
258