Owner's manual

Click [Accessories], and then click [Run].

Enter “D:\SU80\setup.exe” in the [Open] fields, and then

click [OK].

Installation starts.

Follow the instructions on the screen to complete the

installation.

IMPORTANT

The computer may need to be restarted, after the installation,

depending on the operating system. If this is necessary, make

sure to restart the computer.

Connecting the Scanner to a Computer

The only way to connect the scanner to your computer is with a USB

cable.

IMPORTANT

• Be sure to use the USB cable bundled with the scanner or a Hi-

Speed USB 2.0 compatible cable with the length less than 5 m.

• When the application is running, do not turn the scanner OFF or

unplug the interface cable.

• Do not connect multiple CR-50/80 scanners to one computer.

CAUTION

• Do not turn OFF the scanner or remove the interface cable

when an application is running.

• Turn OFF the computer and the scanner before changing the

cable.

USB Connections

Connect the scanner and the computer with the cable provided or a

Hi-Speed USB 2.0 cable.

NOTE

Connect the type B plug (square) to the scanner and connect the

type A plug (flat) to the USB port on the computer.

Type A Plug

Type B Plug

USB

Connector