Operation Manual

Back Previous Page Next Page
Contents
DR-2010C / DR-2510C
DR-2010C / DR-2510C
42
This section describes the procedure for setting the resolution for scanning.
1
In the ISIS/TWAIN driver properties dialog box, click the [Basic] tab →
select the resolution for scanning from the [Dots per inch] drop-down list.
NOTE
• Higher resolutions provide clearer images, but produce larger files.
• When the selected resolution is 300 dpi or less, the [Moire Reduction] setting is
automatically enabled to allow reduction of the moire effect (a shimmering,
wavy pattern) in scanned images.
This section describes the procedure for setting the page side settings for
scanning.
1
In the ISIS/TWAIN driver properties dialog box, click the [Basic] tab →
select the page side to scan from the [Scanning Side] drop-down list.
Specify one of the settings below according to the page side setting you want to
use.
-[Simplex]
Scan only the front side of documents loaded into the feeder.
-[Duplex]
Scan both sides of documents.
Scan Resolution Settings Scanning Side Settings