Operation Manual

Back Previous Page Next Page

Contents

DR-2010C / DR-2510C

This section describes the procedure for automatically correcting the orientation

of the text when scanning.

In the ISIS/TWAIN driver properties dialog box, click the [Image

processing] tab → select the [Text Orientation Recognition] check box.

NOTE

• When the [Text Orientation Recognition] check box is selected, the [Image

Rotation] and area settings in the [Scan Area] dialog box are disabled.

• Some application programs do not support text orientation recognition. Please

disable [Text Orientation Recognition] if your application program operates

abnormally when it is enabled.

This section describes the procedure for setting to reduce bleed through when

scanning thin document pages and pages with dark content on the back side, or

to remove the background from document images.

In the ISIS/TWAIN driver properties dialog box, click the [Image

processing] tab → select the [Prevent Bleed Through / Remove

Background] check box → click [Setting].

Adjust the [Removal level] slider to set the level of bleed through

prevention or background removal.

Correcting Text Orientation Removing the Document Background/Preventing Bleed

Through