Operation Manual

Scanning and Printing Documents

There are two ways of printing scanned images: by “scan batch to printer” that

directly sends the images to the printer for printing without saving them, or by

printing images that are opened on screen. The operation procedure for each

method is different.

Printing Opened Images

The following describes the procedure for printing images opened on screen.

Check [Printer setting...] in the File menu.

Select [Print Format] in the File menu.

• Actual size

Prints at the same size as the paper regardless of the size of paper to be

printed or the resolution at which the image was scanned.

• Fit to paper

Prints the image matched to the paper size when the document is larger than

the paper, and prints at the actual size when the document is smaller than the

paper.

• Actual pixel

Prints each single dot in the scanned image using one output dot on the

printer. For this reason, the print size becomes smaller when a scanned

image is output on a small dot high-resolution printer.

Downloaded from www.Manualslib.com manuals search engine