Operation Manual

57
Setting Detailed Scan Conditions
3
Detailed Settings
[Erase Black dot]
Marking this check box automatically erases isolated black dots (single dots)
on white backgrounds.
[Erase White dot]
Marking this check box automatically erases isolated white dots (single dots)
on black backgrounds.
[Erase Notch]
Marking this check box automatically erases parts (notches) protruding outside
contours.
[Compliment Thin Line]
Marking this check box automatically joins faint or broken lines that occur when
scanning documents containing thin lines or low density.
MEMO
[AE] is enabled when [Mode] is set to [Black and White].
[Edge Emphasis] is enabled when All is selected at Mode.
[Erase Black Dots], [Erase White Dots], [Erase Notch] and [Compliment Thin
Line] are enabled when [Mode] is set to [Black and White] or [Black and White-
ED].
[Use User Gamma]
Check this item to actually use the gamma curve data set by the Gamma
button.
[Gamma] button
Opens the Gamma Settings dialog box, and downloads the gamma curve data
for changing the tonal reproduction settings to the scanner. (See “Setting the
Gamma Curve” P. 68)
Loaded gamma curve data is enabled when the Use User Gamma check box is
marked.
[Default] button
Returns the settings in the Image Controls panel to their defaults.
[OK] button
Enables the settings and closes the Detailed Settings dialog box.
[Cancel] button
Cancels any settings you have set, and closes the Detailed Settings dialog box.
Downloaded from www.Manualslib.com manuals search engine